The haloalkanes (also known as halogenoalkanes or alkyl halides) are a group of chemical compounds derived from alkanes containing one or more halogens. They are a subset of the general class of halocarbons, although the distinction is not often made. Haloalkanes are widely used commercially and, consequently, are known under many chemical and commercial names. They are used as flame retardants, fire extinguishants, refrigerants, propellants, solvents, and pharmaceuticals. Subsequent to the widespread use in commerce, many halocarbons have also been shown to be serious pollutants and toxins. For example, the chlorofluorocarbons have been shown to lead to ozone depletion. Methyl bromide is a controversial fumigant. Only haloalkanes which contain chlorine, bromine, and iodine are a threat to the ozone layer, but fluorinated volatile haloalkanes in theory may have activity as greenhouse gases. Methyl iodide, a naturally occurring substance, however, does not have ozone-depleting properties and the United States Environmental Protection Agency has designated the compound a non-ozone layer depleter. For more information, see Halomethane. Haloalkane or alkyl halides are the compounds which have the general formula "RX" where R is an alkyl or substituted alkyl group and X is a halogen (F, Cl, Br, I).
Haloalkanes have been known for centuries. Chloroethane was produced synthetically in the 15th century. The systematic synthesis of such compounds developed in the 19th century in step with the development of organic chemistry and the understanding of the structure of alkanes. Methods were developed for the selective formation of C-halogen bonds. Especially versatile methods included the addition of halogens to alkenes, hydrohalogenation of alkenes, and the conversion of alcohols to alkyl halides. These methods are so reliable and so easily implemented that haloalkanes became cheaply available for use in industrial chemistry because the halide could be further replaced by other functional groups.
While most haloalkanes are human-produced, non-artificial-source haloalkanes do occur on Earth, mostly through enzyme-mediated synthesis by bacteria, fungi, and especially sea macroalgae (seaweeds). More than 1600 halogenated organics have been identified, with bromoalkanes being the most common haloalkanes. Brominated organics in biology range from biologically produced methyl bromide to non-alkane aromatics and unsaturates (indoles, terpenes, acetogenins, and phenols). Halogenated alkanes in land plants are more rare, but do occur, as for example the fluoroacetate produced as a toxin by at least 40 species of known plants. Specific dehalogenase enzymes in bacteria which remove halogens from haloalkanes, are also known.
From the structural perspective, haloalkanes can be classified according to the connectivity of the carbon atom to which the halogen is attached. In primary (1°) haloalkanes, the carbon that carries the halogen atom is only attached to one other alkyl group. An example is chloroethane . In secondary (2°) haloalkanes, the carbon that carries the halogen atom has two C-C bonds. In tertiary (3°) haloalkanes, the carbon that carries the halogen atom has three C-C bonds.
Haloalkanes can also be classified according to the type of halogen on group 7 responding to a specific halogenoalkane. Haloalkanes containing carbon bonded to fluorine, chlorine, bromine, and iodine results in organofluorine, organochlorine, organobromine and organoiodine compounds, respectively. Compounds containing more than one kind of halogen are also possible. Several classes of widely used haloalkanes are classified in this way chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs) and hydrofluorocarbons (HFCs). These abbreviations are particularly common in discussions of the environmental impact of haloalkanes.
Haloalkanes generally resemble the parent alkanes in being colorless, relatively odorless, and hydrophobic. The melting and boiling points of chloro-, bromo-, and iodoalkanes are higher than the analogous alkanes, scaling with the atomic weight and number of halides. This is due to the increased strength of the intermolecular forces--from London dispersion to dipole-dipole interaction because of the increased polarizability. Thus carbon tetraiodide is a solid whereas carbon tetrachloride is a liquid. Many fluoroalkanes, however, go against this trend and have lower melting and boiling points than their nonfluorinated analogues due to the decreased polarizability of fluorine. For example, methane has a melting point of -182.5 °C whereas tetrafluoromethane has a melting point of -183.6 °C .
As they contain fewer C-H bonds, halocarbons are less flammable than alkanes, and some are used in fire extinguishers. Haloalkanes are better solvents than the corresponding alkanes because of their increased polarity. Haloalkanes containing halogens other than fluorine are more reactive than the parent alkanes--it is this reactivity that is the basis of most controversies. Many are alkylating agents, with primary haloalkanes and those containing heavier halogens being the most active (fluoroalkanes do not act as alkylating agents under normal conditions). The ozone-depleting abilities of the CFCs arises from the photolability of the C-Cl bond.
A large number of pharmaceuticals contain halogens, especially fluorine. An estimated one fifth of pharmaceuticals contain fluorine, including several of the most widely used drugs. Examples include 5-fluorouracil, fluoxetine (Prozac), paroxetine (Paxil), ciprofloxacin (Cipro), mefloquine, and fluconazole. The beneficial effects arise because the C-F bond is relatively unreactive. Fluorine-substituted ethers are volatile anesthetics, including the commercial products methoxyflurane, enflurane, isoflurane, sevoflurane and desflurane. Fluorocarbon anesthetics reduce the hazard of flammability with diethyl ether and cyclopropane. Perfluorinated alkanes are used as blood substitutes.
Chlorinated or fluorinated alkenes undergo polymerization. Important halogenated polymers include polyvinyl chloride (PVC), and polytetrafluoroethene (PTFE, or Teflon). The production of these materials releases substantial amounts of wastes.
The formal naming of haloalkanes should follow IUPAC nomenclature, which put the halogen as a prefix to the alkane. For example, ethane with bromine becomes bromoethane, methane with four chlorine groups becomes tetrachloromethane. However, many of these compounds have already an established trivial name, which is endorsed by the IUPAC nomenclature, for example chloroform (trichloromethane) and methylene chloride (dichloromethane). For unambiguity, this article follows the systematic naming scheme throughout.
Haloalkanes can be produced from virtually all organic precursors. From the perspective of industry, the most important ones are alkanes and alkenes.
Alkanes react with halogens by free radical halogenation. In this reaction a hydrogen atom is removed from the alkane, then replaced by a halogen atom by reaction with a diatomic halogen molecule. The reactive intermediate in this reaction is a free radical and the reaction is called a radical chain reaction.
Free radical halogenation typically produces a mixture of compounds mono- or multihalogenated at various positions. It is possible to predict the results of a halogenation reaction based on bond dissociation energies and the relative stabilities of the radical intermediates. Another factor to consider is the probability of reaction at each carbon atom, from a statistical point of view.
In hydrohalogenation, an alkene reacts with a dry hydrogen halide (HX) like hydrogen chloride or hydrogen bromide to form a mono-haloalkane. The double bond of the alkene is replaced by two new bonds, one with the halogen and one with the hydrogen atom of the hydrohalic acid. Markovnikov's rule states that in this reaction, the halogen is more likely to become attached to the more substituted carbon. This is an electrophilic addition reaction. Water must be absent otherwise there will be a side product of a halohydrin. The reaction is necessarily to be carried out in a dry inert solvent such as or directly in the gaseous phase. The reaction of alkynes are similar, with the product being a geminal dihalide; once again, Markovnikov's rule is followed.
Alkenes also react with halogens (X2) to form haloalkanes with two neighboring halogen atoms in a halogen addition reaction. Alkynes react similarly, forming the tetrahalo compounds. This is sometimes known as "decolorizing" the halogen, since the reagent X2 is colored and the product is usually colorless and odorless.
Alcohol undergoes nucleophilic substitution reaction by halogen acid to give Haloalkanes.Tertiary alkanol reacts with hydrochloric acid directly to produce tertiary choloroalkane(alkyl chloride), but if primary or secondary alcohol is used, an activator such as zinc chloride is needed. This reaction is exploited in the Lucas test.
The most popular conversion is effected by reacting the alcohol with thionyl chloride in the "Darzens halogenation", which is one of the most convenient laboratory methods because the byproducts are gaseous. Both phosphorus pentachloride and phosphorus trichloride also convert the hydroxyl group to the chloride.
Alcohols may likewise be converted to bromoalkanes using hydrobromic acid or phosphorus tribromide (PBr3). A catalytic amount of may be used for the transformation using phosphorus and bromine; is formed in situ.
Iodoalkanes may similarly be prepared using red phosphorus and iodine (equivalent to phosphorus triiodide). The Appel reaction is also useful for preparing alkyl halides. The reagent is tetrahalomethane and triphenylphosphine; the co-products are haloform and triphenylphosphine oxide.
By Rydons method
An alcohol on heating with halogen in presence of triphenyl phosphate produces haloalkanes or alkyl halides.
Haloalkanes are reactive towards nucleophiles. They are polar molecules: the carbon to which the halogen is attached is slightly electropositive where the halogen is slightly electronegative. This results in an electron deficient (electrophilic) carbon which, inevitably, attracts nucleophiles.
Substitution reactions involve the replacement of the halogen with another molecule--thus leaving saturated hydrocarbons, as well as the halogenated product. Haloalkanes behave as the R+synthon, and readily react with nucleophiles.
Hydrolysis, a reaction in which water breaks a bond, is a good example of the nucleophilic nature of haloalkanes. The polar bond attracts a hydroxide ion, OH- (NaOH(aq) being a common source of this ion). This OH- is a nucleophile with a clearly negative charge, as it has excess electrons it donates them to the carbon, which results in a covalent bond between the two. Thus C-X is broken by heterolytic fission resulting in a halide ion, X-. As can be seen, the OH is now attached to the alkyl group, creating an alcohol. (Hydrolysis of bromoethane, for example, yields ethanol). Reaction with ammonia give primary amines.
Haloalkanes react with ionic nucleophiles (e.g. cyanide, thiocyanate, azide); the halogen is replaced by the respective group. This is of great synthetic utility: chloroalkanes are often inexpensively available. For example, after undergoing substitution reactions, cyanoalkanes may be hydrolyzed to carboxylic acids, or reduced to primary amines using lithium aluminium hydride. Azoalkanes may be reduced to primary amines by the Staudinger reduction or lithium aluminium hydride. Amines may also be prepared from alkyl halides in amine alkylation, the Gabriel synthesis and Delepine reaction, by undergoing nucleophilic substitution with potassium phthalimide or hexamine respectively, followed by hydrolysis.
In the presence of a base, haloalkanes alkylate alcohols, amines, and thiols to obtain ethers, N-substituted amines, and thioethers respectively. They are substituted by Grignard reagents to give magnesium salts and an extended alkyl compound.
Where the rate-determining step of a nucleophilic substitution reaction is unimolecular, it is known as an SN1 reaction. In this case, the slowest (thus rate-determining step) is the heterolysis of a carbon-halogen bond to give a carbocation and the halide anion. The nucleophile (electron donor) attacks the carbocation to give the product.
SN1 reactions are associated with the racemization of the compound, as the trigonal planar carbocation may be attacked from either face. They are favored mechanism for tertiary haloalkanes, due to the stabilization of the positive charge on the carbocation by three electron-donating alkyl groups. They are also preferred where the substituents are sterically bulky, hindering the SN2 mechanism.
Rather than creating a molecule with the halogen substituted with something else, one can completely eliminate both the halogen and a nearby hydrogen, thus forming an alkene by dehydrohalogenation. For example, with bromoethane and sodium hydroxide (NaOH) in ethanol, the hydroxide ion HO- abstracts a hydrogen atom. Bromide ion is then lost, resulting in ethylene, H2O and NaBr. Thus, haloalkanes can be converted to alkenes. Similarly, dihaloalkanes can be converted to alkynes.
Haloalkanes undergo free-radical reactions with elemental magnesium to give alkylmagnesium compounds: Grignard reagents. Haloalkanes also react with lithium metal to give organolithium compounds. Both Grignard reagents and organolithium compounds behave as the R- synthon. Alkali metals such as sodium and lithium are able to cause haloalkanes to couple in the Wurtz reaction, giving symmetrical alkanes. Haloalkanes, especially iodoalkanes, also undergo oxidative addition reactions to give organometallic compounds.
Short chain haloalkanes such as dichloromethane, trichloromethane (chloroform) and tetrachloromethane are commonly used as hydrophobic solvents in chemistry. They were formerly very common in industry; however, their use has been greatly curtailed due to their toxicity and harmful environmental effects.
Chlorofluorocarbons were used almost universally as refrigerants and propellants due to their relatively low toxicity and high heat of vaporization. Starting in the 1980s, as their contribution to ozone depletion became known, their use was increasingly restricted, and they have now largely been replaced by HFCs.
Bromochlorodifluoromethane (Halon 1211), and Bromotrifluoromethane (Halon 1301), as well as others are used in fire extinguishers. Due to their high ozone depletion potential, production has ended as of April 6, 1998 cost is high, and they are primarily used for critical applications such as aviation and military.