In organic chemistry, amines (,UK also ) are compounds and functional groups that contain a basic nitrogen atom with a lone pair. Amines are formally derivatives of ammonia, wherein one or more hydrogen atoms have been replaced by a substituent such as an alkyl or aryl group (these may respectively be called alkylamines and arylamines; amines in which both types of substituent are attached to one nitrogen atom may be called alkylarylamines). Important amines include amino acids, biogenic amines, trimethylamine, and aniline; see Category:Amines for a list of amines. Inorganic derivatives of ammonia are also called amines, such as chloramine (NClH2); see Category:Inorganic amines.
An aliphatic amine has no aromatic ring attached directly to the nitrogen atom. Aromatic amines have the nitrogen atom connected to an aromatic ring as in the various anilines. The aromatic ring decreases the alkalinity of the amine, depending on its substituents. The presence of an amine group strongly increases the reactivity of the aromatic ring, due to an electron-donating effect.
Amines are organized into four subcategories:
It is also possible to have four organic substituents on the nitrogen. These species are not amines but are quaternary ammonium cations and have a charged nitrogen center. Quaternary ammonium salts exist with many kinds of anions.
Amines are named in several ways. Typically, the compound is given the prefix "amino-" or the suffix: "-amine". The prefix "N-" shows substitution on the nitrogen atom. An organic compound with multiple amino groups is called a diamine, triamine, tetraamine and so forth.
Systematic names for some common amines:
|Lower amines are named with the suffix -amine.
||Higher amines have the prefix amino as a functional group. IUPAC however does not recommend this convention, but prefers the alkanamine form, e.g. pentan-2-amine.
Hydrogen bonding significantly influences the properties of primary and secondary amines. Thus the melting points and boiling points of amines are higher than those of the corresponding phosphines, but generally lower than those of the corresponding alcohols and carboxylic acids. For example, methyl and ethyl amines are gases under standard conditions, whereas the corresponding methyl and ethyl alcohols are liquids. Amines possess a characteristic ammonia smell, liquid amines have a distinctive "fishy" smell.
The nitrogen atom features a lone electron pair that can bind H+ to form an ammonium ion R3NH+. The lone electron pair is represented in this article by a two dots above or next to the N. The water solubility of simple amines is enhanced by hydrogen bonding involving these lone electron pairs. Typically salts of ammonium compounds exhibit the following order of solubility in water: primary ammonium > secondary ammonium > tertiary ammonium (R3NH+). Small aliphatic amines display significant solubility in many solvents, whereas those with large substituents are lipophilic. Aromatic amines, such as aniline, have their lone pair electrons conjugated into the benzene ring, thus their tendency to engage in hydrogen bonding is diminished. Their boiling points are high and their solubility in water is low.
Alkyl amines characteristically feature tetrahedral nitrogen centers. C-N-C and C-N-H angles approach the idealized angle of 109°. C-N distances are slightly shorter than C-C distances. The energy barrier for the nitrogen inversion of the stereocenter is about 7 kcal/mol for a trialkylamine. The interconversion has been compared to the inversion of an open umbrella into a strong wind.
Amines of the type NHRR? and NRR?R? are chiral: the nitrogen center bears four substituents counting the lone pair. Because of the low barrier to inversion, amines of the type NHRR? cannot be obtained in optical purity. For chiral tertiary amines, NRR?R? can only be resolved when the R, R?, and R? groups are constrained in cyclic structures such as N-substituted aziridines (quaternary ammonium salts are resolvable).
In aromatic amines ("anilines"), nitrogen is often nearly planar owing to conjugation of the lone pair with the aryl substituent. The C-N distance is correspondingly shorter. In aniline, the C-N distance is the same as the C-C distances.
|Alkylamine or aniline||pKa of protonated amine||Kb|
The basicity of amines depends on:
Owing to inductive effects, the basicity of an amine might be expected to increase with the number of alkyl groups on the amine. Correlations are complicated owing to the effects of solvation which are opposite the trends for inductive effects. Solvation effects also dominate the basicity of aromatic amines (anilines). For anilines, the lone pair of electrons on nitrogen delocalises into the ring, resulting in decreased basicity. Substituents on the aromatic ring, and their positions relative to the amine group, also affect basicity as seen in the table.
Solvation significantly affects the basicity of amines. N-H groups strongly interact with water, especially in ammonium ions. Consequently, the basicity of ammonia is enhanced by 1011 by solvation. The intrinsic basicity of amines, i.e. the situation where solvation is unimportant, has been evaluated in the gas phase. In the gas phase, amines exhibit the basicities predicted from the electron-releasing effects of the organic substituents. Thus tertiary amines are more basic than secondary amines, which are more basic than primary amines, and finally ammonia is least basic. The order of pKb's (basicities in water) does not follow this order. Similarly aniline is more basic than ammonia in the gas phase, but ten thousand times less so in aqueous solution.
In aprotic polar solvents such as DMSO, DMF, and acetonitrile the energy of solvation is not as high as in protic polar solvents like water and methanol. For this reason, the basicity of amines in these aprotic solvents is almost solely governed by the electronic effects.
Unlike the reaction of amines with alkyl halides, the industrial method is green insofar that the coproduct is water. The reaction of amines and ammonia with alkyl halides is used for synthesis in the laboratory:
Such reactions, which are most useful for alkyl iodides and bromides, are rarely employed because the degree of alkylation is difficult to control. Selectivity can be improved via the Delépine reaction, although this is rarely employed on an industrial scale.
Via the process of hydrogenation, nitriles are reduced to amines using hydrogen in the presence of a nickel catalyst. Reactions are sensitive to acidic or alkaline conditions, which can cause hydrolysis of the -CN group. LiAlH4 is more commonly employed for the reduction of nitriles on the laboratory scale. Similarly, LiAlH4 reduces amides to amines. Many amines are produced from aldehydes and ketones via reductive amination, which can either proceed catalytically or stoichiometrically.
Aniline (C6H5NH2) and its derivatives are prepared by reduction of the nitroaromatics. In industry, hydrogen is the preferred reductant, whereas, in the laboratory, tin and iron are often employed.
Many laboratory methods exist for the preparation of amines, many of these methods being rather specialized.
|Gabriel synthesis||Organohalide||Reagent: potassium phthalimide|
|Staudinger reduction||Azide||This reaction also takes place with a reducing agent such as lithium aluminium hydride.|
|Schmidt reaction||Carboxylic acid|
|Aza-Baylis-Hillman reaction||Imine||Synthesis of allylic amines|
|Birch reduction||Imine||Useful for reactions that trap unstable imine intermediates, such as Grignard reactions with nitriles.|
|Hofmann degradation||Amide||This reaction is valid for preparation of primary amines only. Gives good yields of primary amines uncontaminated with other amines.|
|Hofmann elimination||Quaternary ammonium salt||Upon treatment with strong base|
|Nitrile reduction||Nitriles||Either accomplished with reducing agents or by electrosynthesis|
|Reduction of nitro compounds||Nitro compounds||Can be accomplished with elemental zinc, tin or iron with an acid.|
|Delepine reaction||Organohalide||reagent Hexamine|
|Buchwald-Hartwig reaction||Aryl halide||Specific for aryl amines|
|Menshutkin reaction||Tertiary amine||Reaction product a quaternary ammonium cation|
|Hydroamination||Alkenes and alkynes|
|Leuckart reaction||Ketones and aldehydes||Reductive amination with formic acid and ammonia via an imine intermediate|
|Eschweiler-Clarke reaction||Amine||Reductive amination with formic acid and formaldehyde via an imine intermediate|
Aside from their basicity, the dominant reactivity of amines is their nucleophilicity. Most primary amines are good ligands for metal ions to give coordination complexes. Amines are alkylated by alkyl halides. Acyl chlorides and acid anhydrides react with primary and secondary amines to form amides (the "Schotten-Baumann reaction").
Because amines are basic, they neutralize acids to form the corresponding ammonium salts R3NH+. When formed from carboxylic acids and primary and secondary amines, these salts thermally dehydrate to form the corresponding amides.
Amines react with nitrous acid to give diazonium salts. The alkyl diazonium salts are of little synthetic importance because they are too unstable. The most important members are derivatives of aromatic amines such as aniline ("phenylamine") (A = aryl or naphthyl):
Anilines and naphthylamines form more stable diazonium salts, which can be isolated in the crystalline form. Diazonium salts undergo a variety of useful transformations involving replacement of the N2 group with anions. For example, cuprous cyanide gives the corresponding nitriles:
Reduction of these imines gives secondary amines:
Similarly, secondary amines react with ketones and aldehydes to form enamines:
An overview of the reactions of amines is given below:
|Reaction name||Reaction product||Comment|
|Amine alkylation||Amines||Degree of substitution increases|
|Schotten-Baumann reaction||Amide||Reagents: acyl chlorides, acid anhydrides|
|Hinsberg reaction||Sulfonamides||Reagents: sulfonyl chlorides|
|Organic oxidation||Nitroso compounds||Reagent: peroxymonosulfuric acid|
|Organic oxidation||Diazonium salt||Reagent: nitrous acid|
|Zincke reaction||Zincke aldehyde||Reagent: pyridinium salts, with primary and secondary amines|
|Emde degradation||Tertiary amine||Reduction of quaternary ammonium cations|
|Hofmann-Martius rearrangement||Aryl-substituted anilines|
|von Braun reaction||Organocyanamide||By cleavage (tertiary amines only) with cyanogen bromide|
|Hofmann elimination||Alkene||Proceeds by ?-elimination of less hindered carbon|
|Cope reaction||Alkene||Similar to Hofmann elimination|
|carbylamine reaction||Isonitrile||Primary amines only|
|Hoffmann's mustard oil test||Isothiocyanate||CS2 and HgCl2 are used. Thiocyanate smells like mustard.|
Amines are ubiquitous in biology. The breakdown of amino acids releases amines, famously in the case of decaying fish which smell of trimethylamine. Many neurotransmitters are amines, including epinephrine, norepinephrine, dopamine, serotonin, and histamine. Protonated amino groups are the most common positively charged moieties in proteins, specifically in the amino acid lysine. The anionic polymer DNA is typically bound to various amine-rich proteins. Additionally, the terminal charged primary ammonium on lysine forms salt bridges with carboxylate groups of other amino acids in polypeptides, which is one of the primary influences on the three-dimensional structures of proteins.
Primary aromatic amines are used as a starting material for the manufacture of azo dyes. It reacts with nitrous acid to form diazonium salt, which can undergo coupling reaction to form an azo compound. As azo-compounds are highly coloured, they are widely used in dyeing industries, such as:
Many drugs are designed to mimic or to interfere with the action of natural amine neurotransmitters, exemplified by the amine drugs:
Aqueous monoethanolamine (MEA), diglycolamine (DGA), diethanolamine (DEA), diisopropanolamine (DIPA) and methyldiethanolamine (MDEA) are widely used industrially for removing carbon dioxide (CO2) and hydrogen sulfide (H2S) from natural gas and refinery process streams. They may also be used to remove CO2 from combustion gases and flue gases and may have potential for abatement of greenhouse gases. Related processes are known as sweetening.
Low molecular weight simple amines, such as ethylamine, are only weakly toxic with LD50 between 100 and 1000 mg/kg. They are skin irritants, especially as some are easily absorbed through the skin. Amines are a broad class of compounds, and more complex members of the class can be extremely bioactive, for example strychnine and heroin.