3D model (JSmol)
|E number||E516 (acidity regulators, ...)|
CompTox Dashboard (EPA)
|Molar mass||136.14 g/mol (anhydrous)|
145.15 g/mol (hemihydrate)
172.172 g/mol (dihydrate)
|Density||2.96 g/cm3 (anhydrous) |
2.32 g/cm3 (dihydrate)
|Melting point||1,460 °C (2,660 °F; 1,730 K) (anhydrous)|
|0.21g/100ml at 20 °C (anhydrous)|
0.24 g/100ml at 20 °C (dihydrate)
Solubility product (Ksp)
|4.93 × 10-5 mol2L-2 (anhydrous)|
3.14 × 10-5 (dihydrate)
|Solubility in glycerol||slightly soluble (dihydrate)|
|Acidity (pKa)||10.4 (anhydrous) |
Std enthalpy of
|Safety data sheet||See: data page|
|NFPA 704 (fire diamond)|
|NIOSH (US health exposure limits):|
|TWA 15 mg/m3 (total) TWA 5 mg/m3 (resp) [for anhydrous form only]|
|TWA 10 mg/m3 (total) TWA 5 mg/m3 (resp) [anhydrous only]|
IDLH (Immediate danger)
|Plaster of Paris|
|Supplementary data page|
|Refractive index (n),|
Dielectric constant (?r), etc.
|UV, IR, NMR, MS|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|what is ?)(|
Calcium sulfate (or calcium sulphate) is the inorganic compound with the formula CaSO4 and related hydrates. In the form of ?-anhydrite (the anhydrous form), it is used as a desiccant. One particular hydrate is better known as plaster of Paris, and another occurs naturally as the mineral gypsum. It has many uses in industry. All forms are white solids that are poorly soluble in water. Calcium sulfate causes permanent hardness in water.
The compound exists in three levels of hydration corresponding to different crystallographic structures and to different minerals in nature:
The main use of calcium sulfate is to produce plaster of Paris and stucco. These applications exploit the fact that calcium sulfate which has been powdered and calcined forms a moldable paste upon hydration and hardens as crystalline calcium sulfate dihydrate. It is also convenient that calcium sulfate is poorly soluble in water and does not readily dissolve in contact with water after its solidification.
With judicious heating, gypsum converts to the partially dehydrated mineral called bassanite or plaster of Paris. This material has the formula CaSO4·(nH2O), where 0.5 n  Temperatures between 100 and 150 °C (212-302 °F) are required to drive off the water within its structure. The details of the temperature and time depend on ambient humidity. Temperatures as high as 170 °C (338 °F) are used in industrial calcination, but at these temperatures ?-anhydrite begins to form. The heat energy delivered to the gypsum at this time (the heat of hydration) tends to go into driving off water (as water vapor) rather than increasing the temperature of the mineral, which rises slowly until the water is gone, then increases more rapidly. The equation for the partial dehydration is:
The endothermic property of this reaction is relevant to the performance of drywall, conferring fire resistance to residential and other structures. In a fire, the structure behind a sheet of drywall will remain relatively cool as water is lost from the gypsum, thus preventing (or substantially retarding) damage to the framing (through combustion of wood members or loss of strength of steel at high temperatures) and consequent structural collapse. But at higher temperatures, calcium sulfate will release oxygen and act as an oxidizing agent. This property is used in aluminothermy. In contrast to most minerals, which when rehydrated simply form liquid or semi-liquid pastes, or remain powdery, calcined gypsum has an unusual property: when mixed with water at normal (ambient) temperatures, it quickly reverts chemically to the preferred dihydrate form, while physically "setting" to form a rigid and relatively strong gypsum crystal lattice:
This reaction is exothermic and is responsible for the ease with which gypsum can be cast into various shapes including sheets (for drywall), sticks (for blackboard chalk), and molds (to immobilize broken bones, or for metal casting). Mixed with polymers, it has been used as a bone repair cement. Small amounts of calcined gypsum are added to earth to create strong structures directly from cast earth, an alternative to adobe (which loses its strength when wet). The conditions of dehydration can be changed to adjust the porosity of the hemihydrate, resulting in the so-called ?- and ?-hemihydrates (which are more or less chemically identical).
On heating to 180 °C (356 °F), the nearly water-free form, called ?-anhydrite (CaSO4·nH2O where n = 0 to 0.05) is produced. ?-Anhydrite reacts slowly with water to return to the dihydrate state, a property exploited in some commercial desiccants. On heating above 250 °C, the completely anhydrous form called ?-anhydrite or "natural" anhydrite is formed. Natural anhydrite does not react with water, even over geological timescales, unless very finely ground.
The variable composition of the hemihydrate and ?-anhydrite, and their easy inter-conversion, is due to their nearly identical crystal structures containing "channels" that can accommodate variable amounts of water, or other small molecules such as methanol.
For the FDA, it is permitted in Cheese and Related Cheese Products; Cereal Flours; Bakery Products; Frozen Desserts; Artificial Sweeteners for Jelly & Preserves; Condiment Vegetables; and Condiment Tomatoes and some candies.
Calcium sulfate has a long history of use in dentistry. It has been used in bone regeneration as a graft material and graft binder/extender and as a barrier in guided tissue regeneration. It is an unusually biocompatible material and is completely resorbed following implantation. It does not evoke a significant host response and creates a calcium-rich milieu in the area of implantation.
When sold at the anhydrous state as a desiccant with a color-indicating agent under the name Drierite, it appears blue (anhydrous) or pink (hydrated) due to impregnation with cobalt(II) chloride, which functions as a moisture indicator.
Up to the 1970s, commercial quantities of sulfuric acid were produced in Whitehaven (Cumbria, UK) from anhydrous calcium sulfate. Upon being mixed with shale or marl, and roasted, the sulfate liberates sulfur trioxide gas, a precursor in sulfuric acid production, the reaction also produces calcium silicate, a mineral phase essential in cement clinker production.
The main sources of calcium sulfate are naturally occurring gypsum and anhydrite, which occur at many locations worldwide as evaporites. These may be extracted by open-cast quarrying or by deep mining. World production of natural gypsum is around 127 million tonnes per annum.
In addition to natural sources, calcium sulfate is produced as a by-product in a number of processes:
These precipitation processes tend to concentrate radioactive elements in the calcium sulfate product. This issue is particular with the phosphate by-product, since phosphate ores naturally contain uranium and its decay products such as radium-226, lead-210 and polonium-210.
Calcium sulfate is also a common component of fouling deposits in industrial heat exchangers, because its solubility decreases with increasing temperature (see the specific section on the retrograde solubility).
The dissolution of the different crystalline phases of calcium sulfate in water is exothermic and releases heat (decrease in EnthalpyH < 0). As an immediate consequence, to proceed, the dissolution reaction needs to evacuate this heat that can be considered as a product of reaction. If the system is cooled, the dissolution equilibrium will evolve towards the right according to the Le Chatelier principle and calcium sulfate will dissolve more easily. The solubility of calcium sulfate increases thus when the temperature decreases. If the temperature of the system is raised, the reaction heat cannot dissipate and the equilibrium will regress towards the left according to Le Chatelier principle. The solubility of calcium sulfate decreases thus when temperature increases. This contra-intuitive solubility behaviour is called retrograde solubility. It is less common than for most of the salts whose dissolution reaction is endothermic (i.e., the reaction consumes heat: increase in EnthalpyH > 0) and whose solubility increases with temperature. Another calcium compound, calcium hydroxide (Ca(OH)2, portlandite) also exhibits a retrograde solubility for the same thermodynamic reason: because its dissolution reaction is also exothermic and releases heat. So, to dissolve higher amounts of calcium sulfate or calcium hydroxide in water, it is necessary to cool down the solution close to its freezing point instead of increasing its temperature.
The retrograde solubility of calcium sulfate is also responsible for its precipitation in the hottest zone of heating systems and for its contribution to the formation of scale in boilers along with the precipitation of calcium carbonate whose solubility also decreases when CO2 degasses from hot water or can escape out of the system.