Center of Gravity

Get Center of Gravity essential facts below. View Videos or join the Center of Gravity discussion. Add Center of Gravity to your PopFlock.com topic list for future reference or share this resource on social media.
## History

## Definition

### A system of particles

### A continuous volume

### Barycentric coordinates

### Systems with periodic boundary conditions

## Center of gravity

## Linear and angular momentum

## Locating the center of mass

### In two dimensions

### In three dimensions

## Applications

### Engineering designs

#### Automotive applications

#### Aeronautics

### Astronomy

### Rigging and safety

### Body motion

## See also

## Notes

## References

## External links

This article uses material from the Wikipedia page available here. It is released under the Creative Commons Attribution-Share-Alike License 3.0.

Center of Gravity

In physics, the **center of mass** of a distribution of mass in space (sometimes referred to as the **balance point**) is the unique point where the weighted relative position of the distributed mass sums to zero. This is the point to which a force may be applied to cause a linear acceleration without an angular acceleration. Calculations in mechanics are often simplified when formulated with respect to the center of mass. It is a hypothetical point where the entire mass of an object may be assumed to be concentrated to visualise its motion. In other words, the center of mass is the particle equivalent of a given object for application of Newton's laws of motion.

In the case of a single rigid body, the center of mass is fixed in relation to the body, and if the body has uniform density, it will be located at the centroid. The center of mass may be located outside the physical body, as is sometimes the case for hollow or open-shaped objects, such as a horseshoe. In the case of a distribution of separate bodies, such as the planets of the Solar System, the center of mass may not correspond to the position of any individual member of the system.

The center of mass is a useful reference point for calculations in mechanics that involve masses distributed in space, such as the linear and angular momentum of planetary bodies and rigid body dynamics. In orbital mechanics, the equations of motion of planets are formulated as point masses located at the centers of mass. The center of mass frame is an inertial frame in which the center of mass of a system is at rest with respect to the origin of the coordinate system.

The concept of "center of mass" in the form of the **center of gravity** was first introduced by the great ancient Greek physicist, mathematician, and engineer Archimedes of Syracuse. He worked with simplified assumptions about gravity that amount to a uniform field, thus arriving at the mathematical properties of what we now call the center of mass. Archimedes showed that the torque exerted on a lever by weights resting at various points along the lever is the same as what it would be if all of the weights were moved to a single point--their center of mass. In work on floating bodies he demonstrated that the orientation of a floating object is the one that makes its center of mass as low as possible. He developed mathematical techniques for finding the centers of mass of objects of uniform density of various well-defined shapes.^{[1]}

Later mathematicians who developed the theory of the center of mass include Pappus of Alexandria, Guido Ubaldi, Francesco Maurolico,^{[2]}Federico Commandino,^{[3]}Simon Stevin,^{[4]}Luca Valerio,^{[5]}Jean-Charles de la Faille, Paul Guldin,^{[6]}John Wallis, Louis Carré, Pierre Varignon, and Alexis Clairaut.^{[7]}

Newton's second law is reformulated with respect to the center of mass in Euler's first law.^{[8]}

The center of mass is the unique point at the center of a distribution of mass in space that has the property that the weighted position vectors relative to this point sum to zero. In analogy to statistics, the center of mass is the mean location of a distribution of mass in space.

In the case of a system of particles *P _{i}*,

Solving this equation for **R** yields the formula

where is the total mass of all of the particles.

If the mass distribution is continuous with the density ?(**r**) within a solid *Q*, then the integral of the weighted position coordinates of the points in this volume relative to the center of mass **R** over the volume **V** is zero, that is

Solve this equation for the coordinates **R** to obtain

where M is the total mass in the volume.

If a continuous mass distribution has uniform density, which means ? is constant, then the center of mass is the same as the centroid of the volume.^{[9]}

The coordinates **R** of the center of mass of a two-particle system, *P _{1}* and

Let the percentage of the total mass divided between these two particles vary from 100% *P _{1}* and 0%

For particles in a system with periodic boundary conditions two particles can be neighbours even though they are on opposite sides of the system. This occurs often in molecular dynamics simulations, for example, in which clusters form at random locations and sometimes neighbouring atoms cross the periodic boundary. When a cluster straddles the periodic boundary, a naive calculation of the center of mass will be incorrect. A generalized method for calculating the center of mass for periodic systems is to treat each coordinate, *x* and *y* and/or *z*, as if it were on a circle instead of a line.^{[10]} The calculation takes every particle's *x* coordinate and maps it to an angle,

where *x*_{max} is the system size in the *x* direction and . From this angle, two new points can be generated, which can be weighted by the mass of the particle for the center of mass or given a value of 1 for the geometric center:

In the plane, these coordinates lie on a circle of radius 1. From the collection of and values from all the particles, the averages and are calculated.

where M is the sum of the masses of all of the particles.

These values are mapped back into a new angle, , from which the *x* coordinate of the center of mass can be obtained:

The process can be repeated for all dimensions of the system to determine the complete center of mass. The utility of the algorithm is that it allows the mathematics to determine where the "best" center of mass is, instead of guessing or using cluster analysis to "unfold" a cluster straddling the periodic boundaries. If both average values are zero, , then is undefined. This is a correct result, because it only occurs when all particles are exactly evenly spaced. In that condition, their *x* coordinates are mathematically identical in a periodic system.

A body's center of gravity is the point around which the resultant torque due to gravity forces vanishes. Where a gravity field can be considered to be uniform, the mass-center and the center-of-gravity will be the same. However, for satellites in orbit around a planet, in the absence of other torques being applied to a satellite, the slight variation (gradient) in gravitational field between closer-to (stronger) and further-from (weaker) the planet can lead to a torque that will tend to align the satellite such that its long axis is vertical. In such a case, it is important to make the distinction between the center-of-gravity and the mass-center. Any horizontal offset between the two will result in an applied torque.

It is useful to note that the mass-center is a fixed property for a given rigid body (e.g. with no slosh or articulation), whereas the center-of-gravity may, in addition, depend upon its orientation in a non-uniform gravitational field. In the latter case, the center-of-gravity will always be located somewhat closer to the main attractive body as compared to the mass-center, and thus will change its position in the body of interest as its orientation is changed.

In the study of the dynamics of aircraft, vehicles and vessels, forces and moments need to be resolved relative to the mass center. That is true independent of whether gravity itself is a consideration. Referring to the mass-center as the center-of-gravity is something of a colloquialism, but it is in common usage and when gravity gradient effects are negligible, center-of-gravity and mass-center are the same and are used interchangeably.

In physics the benefits of using the center of mass to model a mass distribution can be seen by considering the resultant of the gravity forces on a continuous body. Consider a body Q of volume V with density ?(**r**) at each point **r** in the volume. In a parallel gravity field the force **f** at each point **r** is given by,

where dm is the mass at the point **r**, g is the acceleration of gravity, and *k* is a unit vector defining the vertical direction.
Choose a reference point **R** in the volume and compute the resultant force and torque at this point,

and

If the reference point **R** is chosen so that it is the center of mass, then

which means the resultant torque **T**=0. Because the resultant torque is zero the body will move as though it is a particle with its mass concentrated at the center of mass.

By selecting the center of gravity as the reference point for a rigid body, the gravity forces will not cause the body to rotate, which means the weight of the body can be considered to be concentrated at the center of mass.

The linear and angular momentum of a collection of particles can be simplified by measuring the position and velocity of the particles relative to the center of mass. Let the system of particles *P _{i}*,

The total linear momentum and angular momentum of the system are

and

If **R** is chosen as the center of mass these equations simplify to

where *m* is the total mass of all the particles, **p** is the linear momentum, and **L** is the angular momentum.

The Law of Conservation of Momentum predicts that for any system not subjected to external forces the momentum of the system will remain constant, which means the center of mass will move with constant velocity. This applies for all systems with classical internal forces, including magnetic fields, electric fields, chemical reactions, and so on. More formally, this is true for any internal forces that cancel in accordance with Newton's Third Law.^{[11]}

The experimental determination of the center of mass of a body uses gravity forces on the body and relies on the fact that in the parallel gravity field near the surface of the earth the center of mass is the same as the center of gravity.

The center of mass of a body with an axis of symmetry and constant density must lie on this axis. Thus, the center of mass of a circular cylinder of constant density has its center of mass on the axis of the cylinder. In the same way, the center of mass of a spherically symmetric body of constant density is at the center of the sphere. In general, for any symmetry of a body, its center of mass will be a fixed point of that symmetry.^{[12]}

An experimental method for locating the center of mass is to suspend the object from two locations and to drop plumb lines from the suspension points. The intersection of the two lines is the center of mass.^{[13]}

The shape of an object might already be mathematically determined, but it may be too complex to use a known formula. In this case, one can subdivide the complex shape into simpler, more elementary shapes, whose centers of mass are easy to find. If the total mass and center of mass can be determined for each area, then the center of mass of the whole is the weighted average of the centers.^{[14]} This method can even work for objects with holes, which can be accounted for as negative masses.^{[15]}

A direct development of the planimeter known as an integraph, or integerometer, can be used to establish the position of the centroid or center of mass of an irregular two-dimensional shape. This method can be applied to a shape with an irregular, smooth or complex boundary where other methods are too difficult. It was regularly used by ship builders to compare with the required displacement and center of buoyancy of a ship, and ensure it would not capsize.^{[16]}^{[17]}

An experimental method to locate the three-dimensional coordinates of the center of mass begins by supporting the object at three points and measuring the forces, **F**_{1}, **F**_{2}, and **F**_{3} that resist the weight of the object, ( is the unit vector in the vertical direction). Let **r**_{1}, **r**_{2}, and **r**_{3} be the position coordinates of the support points, then the coordinates **R** of the center of mass satisfy the condition that the resultant torque is zero,

or

This equation yields the coordinates of the center of mass **R*** in the horizontal plane as,

The center of mass lies on the vertical line L, given by

The three-dimensional coordinates of the center of mass are determined by performing this experiment twice with the object positioned so that these forces are measured for two different horizontal planes through the object. The center of mass will be the intersection of the two lines L_{1} and L_{2} obtained from the two experiments.

Engineers try to design a sports car so that its center of mass is lowered to make the car handle better, that is maintaining traction while executing relatively sharp turns.

The characteristic low profile of the U.S. military Humvee was designed in part to allow it tilt farther than taller vehicles, without a rollover, because its low center of mass would stay over the space bounded the four wheels even at angles far from the horizontal.

The center of mass is an important point on an aircraft, which significantly affects the stability of the aircraft. To ensure the aircraft is stable enough to be safe to fly, the center of mass must fall within specified limits. If the center of mass is ahead of the forward limit, the aircraft will be less maneuverable, possibly to the point of being unable to rotate for takeoff or flare for landing.^{[18]} If the center of mass is behind the aft limit, the aircraft will be more maneuverable, but also less stable, and possibly unstable enough so as to be impossible to fly. The moment arm of the elevator will also be reduced, which makes it more difficult to recover from a stalled condition.^{[19]}

For helicopters in hover, the center of mass is always directly below the rotorhead. In forward flight, the center of mass will move forward to balance the negative pitch torque produced by applying cyclic control to propel the helicopter forward; consequently a cruising helicopter flies "nose-down" in level flight.^{[20]}

The center of mass plays an important role in astronomy and astrophysics, where it is commonly referred to as the *barycenter*. The barycenter is the point between two objects where they balance each other; it is the center of mass where two or more celestial bodies orbit each other. When a moon orbits a planet, or a planet orbits a star, both bodies are actually orbiting a point that lies away from the center of the primary (larger) body.^{[21]} For example, the Moon does not orbit the exact center of the Earth, but a point on a line between the center of the Earth and the Moon, approximately 1,710 km (1,062 miles) below the surface of the Earth, where their respective masses balance. This is the point about which the Earth and Moon orbit as they travel around the Sun. If the masses are more similar, e.g., Pluto and Charon, the barycenter will fall outside both bodies.

Knowing the location of the center of gravity when rigging is crucial, possibly resulting in severe injury or death if assumed incorrectly. A center of gravity that is at or above the lift point will most likely result in a tip-over incident. In general, the further the center of gravity below the pick point, the more safe the lift. There are other things to consider, such as shifting loads, strength of the load and mass, distance between pick points, and number of pick points. Specifically, when selecting lift points, it's very important to place the center of gravity at the center and well below the lift points.^{[22]}

In kinesiology and biomechanics, the center of mass is an important parameter that assists people in understanding their human locomotion. Typically, a human's center of mass is detected with one of two methods: The reaction board method is a static analysis that involves the person lying down on that instrument, and use of their static equilibrium equation to find their center of mass; the segmentation method relies on a mathematical solution based on the physical principle that the summation of the torques of individual body sections, relative to a specified axis, must equal the torque of the whole system that constitutes the body, measured relative to the same axis.^{[23]}

**^**Shore 2008, pp. 9-11.**^**Baron 2004, pp. 91-94.**^**Baron 2004, pp. 94-96.**^**Baron 2004, pp. 96-101.**^**Baron 2004, pp. 101-106.**^**Mancosu 1999, pp. 56-61.**^**Walton 1855, p. 2.**^**Beatty 2006, p. 29.**^**Levi 2009, p. 85.**^**Bai & Breen 2008.**^**Kleppner & Kolenkow 1973, p. 117.**^**Feynman, Leighton & Sands 1963, p. 19.3.**^**Kleppner & Kolenkow 1973, pp. 119-120.**^**Feynman, Leighton & Sands 1963, pp. 19.1-19.2.**^**Hamill 2009, pp. 20-21.**^**"The theory and design of British shipbuilding".*Amos Lowrey Ayre*. p. 3. Retrieved .**^**Sangwin 2006, p. 7.**^**Federal Aviation Administration 2007, p. 1.4.**^**Federal Aviation Administration 2007, p. 1.3.**^**"Helicopter Aerodynamics" (PDF). p. 82. Archived from the original (PDF) on 2012-03-24. Retrieved .**^**Murray & Dermott 1999, pp. 45-47.**^**"Structural Collapse Technician: Module 4 - Lifting and Rigging" (PDF).*FEMA.gov*. Retrieved .**^**Vint 2003, pp. 1-11.

- Asimov, Isaac (1988) [1966],
*Understanding Physics*, Barnes & Noble Books, ISBN 978-0-88029-251-1 - Bai, Linge; Breen, David (2008). "Calculating Center of Mass in an Unbounded 2D Environment".
*Journal of Graphics, GPU, and Game Tools*.**13**(4): 53-60. doi:10.1080/2151237X.2008.10129266. S2CID 40807367. - Baron, Margaret E. (2004) [1969],
*The Origins of the Infinitesimal Calculus*, Courier Dover Publications, ISBN 978-0-486-49544-6 - Beatty, Millard F. (2006),
*Principles of Engineering Mechanics, Volume 2: Dynamics--The Analysis of Motion*, Mathematical Concepts and Methods in Science and Engineering,**33**, Springer, ISBN 978-0-387-23704-6 - De Silva, Clarence W. (2002),
*Vibration and shock handbook*, CRC Press, ISBN 978-0-8493-1580-0 - Federal Aviation Administration (2007),
*Aircraft Weight and Balance Handbook*(PDF), United States Government Printing Office, archived from the original (PDF) on 2011-10-19, retrieved - Feynman, Richard; Leighton, Robert B.; Sands, Matthew (1963),
*The Feynman Lectures on Physics*,**1**(Sixth printing, February 1977 ed.), Addison-Wesley, ISBN 978-0-201-02010-6 - Frautschi, Steven C.; Olenick, Richard P.; Apostol, Tom M.; Goodstein, David L. (1986),
*The Mechanical Universe: Mechanics and heat, advanced edition*, Cambridge University Press, ISBN 978-0-521-30432-0 - Giambattista, Alan; Richardson, Betty McCarthy; Richardson, Robert Coleman (2007),
*College physics*,**1**(2nd ed.), McGraw-Hill Higher Education, ISBN 978-0-07-110608-5 - Goldstein, Herbert; Poole, Charles; Safko, John (2001),
*Classical Mechanics*(3rd ed.), Addison Wesley, ISBN 978-0-201-65702-9 - Goldstein, Herbert; Poole, Charles; Safko, John (2002),
*Classical Mechanics*(3rd ed.), Addison-Wesley, ISBN 978-0-201-65702-9 - Goodman, Lawrence E.; Warner, William H. (2001) [1964],
*Statics*, Dover, ISBN 978-0-486-42005-9 - Hamill, Patrick (2009),
*Intermediate Dynamics*, Jones & Bartlett Learning, ISBN 978-0-7637-5728-1 - Jong, I. G.; Rogers, B. G. (1995),
*Engineering Mechanics: Statics*, Saunders College Publishing, ISBN 978-0-03-026309-5 - Kleppner, Daniel; Kolenkow, Robert (1973),
*An Introduction to Mechanics*(2nd ed.), McGraw-Hill, ISBN 978-0-07-035048-9 - Levi, Mark (2009),
*The Mathematical Mechanic: Using Physical Reasoning to Solve Problems*, Princeton University Press, ISBN 978-0-691-14020-9 - Mancosu, Paolo (1999),
*Philosophy of mathematics and mathematical practice in the seventeenth century*, Oxford University Press, ISBN 978-0-19-513244-1 - Millikan, Robert Andrews (1902),
*Mechanics, molecular physics and heat: a twelve weeks' college course*, Chicago: Scott, Foresman and Company, retrieved - Murray, Carl; Dermott, Stanley (1999),
*Solar System Dynamics*, Cambridge University Press, ISBN 978-0-521-57295-8 - O'Donnell, Peter J. (2015),
*Essential Dynamics and Relativity*, CRC Press, ISBN 978-1-466-58839-4 - Pollard, David D.; Fletcher, Raymond C. (2005),
*Fundamentals of Structural Geology*, Cambridge University Press, ISBN 978-0-521-83927-3 - Pytel, Andrew; Kiusalaas, Jaan (2010),
*Engineering Mechanics: Statics*,**1**(3rd ed.), Cengage Learning, ISBN 978-0-495-29559-4 - Rosen, Joe; Gothard, Lisa Quinn (2009),
*Encyclopedia of Physical Science*, Infobase Publishing, ISBN 978-0-8160-7011-4 - Sangwin, Christopher J. (2006), "Locating the centre of mass by mechanical means" (PDF),
*Journal of the Oughtred Society*,**15**(2), archived from the original (PDF) on 2011-10-05, retrieved - Serway, Raymond A.; Jewett, John W. (2006),
*Principles of physics: a calculus-based text*,**1**(4th ed.), Thomson Learning, Bibcode:2006ppcb.book.....J, ISBN 978-0-534-49143-7 - Shirley, James H.; Fairbridge, Rhodes Whitmore (1997),
*Encyclopedia of planetary sciences*, Springer, ISBN 978-0-412-06951-2 - Shore, Steven N. (2008),
*Forces in Physics: A Historical Perspective*, Greenwood Press, ISBN 978-0-313-33303-3 - Symon, Keith R. (1971),
*Mechanics*(3rd ed.), Addison-Wesley, ISBN 978-0-201-07392-8 - Tipler, Paul A.; Mosca, Gene (2004),
*Physics for Scientists and Engineers*,**1A**(5th ed.), W. H. Freeman and Company, ISBN 978-0-7167-0900-8 - Van Pelt, Michael (2005),
*Space Tourism: Adventures in Earth Orbit and Beyond*, Springer, ISBN 978-0-387-40213-0 - Vint, Peter (2003), "LAB: Center of Mass (Center of Gravity) of the Human Body" (PDF),
*KIN 335 - Biomechanics*, retrieved - Walton, William (1855),
*A collection of problems in illustration of the principles of theoretical mechanics*(2nd ed.), Deighton, Bell & Co.

- Motion of the Center of Mass shows that the motion of the center of mass of an object in free fall is the same as the motion of a point object.
- The Solar System's barycenter, simulations showing the effect each planet contributes to the Solar System's barycenter.
- Center of Gravity at Work, video showing objects climbing up an incline by themselves.

This article uses material from the Wikipedia page available here. It is released under the Creative Commons Attribution-Share-Alike License 3.0.

Popular Products

Music Scenes

Popular Artists