Diving Equipment
Get Diving Equipment essential facts below. View Videos or join the Diving Equipment discussion. Add Diving Equipment to your PopFlock.com topic list for future reference or share this resource on social media.
Diving Equipment
Diving equipment
Two display dummies dressed in surface supplied diving equipment at a dive trade show
Surface supplied commercial diving equipment on display at a trade show
Other namesDive gear
UsesFacilitate underwater diving operations

Diving equipment is equipment used by underwater divers to make diving activities possible, easier, safer and/or more comfortable. This may be equipment primarily intended for this purpose, or equipment intended for other purposes which is found to be suitable for diving use.

The fundamental item of diving equipment used by divers is underwater breathing apparatus, such as scuba equipment, and surface supplied diving equipment, but there are other important pieces of equipment that make diving safer, more convenient or more efficient. Diving equipment used by recreational scuba divers is mostly personal equipment carried by the diver, but professional divers, particularly when operating in the surface supplied or saturation mode, use a large amount of support equipment not carried by the diver.

Equipment which is used for underwater work or other activities which is not directly related to the activity of diving, or which has not been designed or modified specifically for underwater use by divers is excluded.

Classes of underwater breathing apparatus

  • Surface supplied diving[1] - mostly used in professional diving. This category includes:
  • Scuba diving - The use of self-contained underwater breathing apparatus. This category includes:
  • Free diving or breathhold diving, where the diver completes the dive on a single breath of air taken at the surface before the dive.
    • Snorkel allows breathing at the surface with the face submerged, and is used as an adjunct to free diving and scuba.
  • Atmospheric diving suits and other submersibles which isolate the diver from the ambient environment. These are not considered here.
  • Liquid breathing systems are extremely rare and at an early experimental stage. It is hoped that some day practical systems will allow very deep diving. This is not considered here.

Personal diving equipment

This is the diving equipment worn by or carried by the diver for personal protection or comfort, or to facilitate the diving aspect of the activity, and may include a selection from:

Underwater breathing apparatus

Exposure protection

Thermal, sting and abrasion protection.

  • In cold water, a diving suit such as a dry suit (at temperatures of 0-10 °C), a wet suit (at temperatures of 21-25 °C), or a Hot water suit (surface supplied diving only) is necessary.
  • Boiler suit overalls are often worn over the thermal protection suit by commercial divers as abrasion protection
  • In very warm water (temperatures of 26-30 °C), many types of tough, long, everyday clothing provide protection, as well as purpose made garments such as dive skins (made of lycra) and shorty wetsuits. In some cases, simple regular swimsuits are also used.[2]
  • Diving gloves, including wetsuit gloves and dry gloves, mitts, and three-finger mitts
  • Diving hoods
  • Diving boots - With dry suits, the boots are usually integrated.
  • Safety helmet for scuba diving. (Not part of the breathing apparatus.)
  • Diving chain mail may be used as protection against bites by large marine animals
  • Diver's cages may be used as protection against large predators

In-water stabilisation and movement

  • A backplate is a structure onto which the back-mounted diving cylinders are mounted, usually linking the buoyancy compensator with the weight of the diving cylinders and provided with a harness of straps which secures the scuba set to the diver's back. A backplate is generally used with a back inflation (wing) type buoyancy compensator, but can also be used without any buoyancy compensator.
  • Buoyancy compensator, also known as Buoyancy Control Device, BCD or BC - is usually a back mounted or sleeveless jacket style device which includes an inflatable bladder used to adjust the buoyancy of the diver under water, and provide positive buoyancy at the surface. The buoyancy compensator is usually an integral part of the harness system used to secure the scuba set to the diver. The earlier collar style buoyancy compensator is seldom used any more.
  • Diver Propulsion Vehicle - to increase the range of the diver underwater
  • Diving weighting system - to counteract the buoyancy of the diving suit and diver to allow descent. Professional divers may use additional weighting to ensure stability when working on the bottom
  • Fins for efficient propulsion

Equipment for dive monitoring and navigation

  • Depth gauge lets the diver monitor depth, particularly maximum depth and, when used with a watch and Decompression tables, also allows the diver to monitor decompression requirements. Some digital depth gauges also indicate ascent rate which is an important factor in avoiding decompression sickness
  • Pneumofathometer is the surface supplied diving depth gauge which displays the depth of the diver at the surface control panel.
  • Diving watch is used with depth gauge for decompression monitoring when using decompression tables. Largely superseded by dive computers, where elapsed time is one of the standard displays, and time of day may also be available.
  • Dive timer is an instrument that displays and records depth and elapsed time during the dive. It is usually possible to extract the information after the dive. This function is often available as "Gauge setting" on dive computers.
  • Diving compass for underwater navigation. This is often a selectable function of a dive computer.
  • Submersible pressure gauge, also known as a "contents gauge" is used to monitor the remaining breathing gas supply in scuba cylinders.
  • Dive computer helps the diver to avoid decompression sickness by indicating the decompression stops needed for the dive profile. Most dive computers also indicate depth, time and ascent rate. Some also indicate oxygen toxicity exposure and water temperature, and may provide other functions. A display of cylinder pressure is available on air-integrated computers, either via a direct high pressure hose, or remotely via a pressure transducer and through-water transmission.
  • Distance line or "come-home-line" can used to guide the diver back to the start point and safety in poor visibility.
    • A cave line is a line laid by a diver while penetrating a cave to ensure that the way out is known. Permanent cave lines are marked with line markers at all junctions, indicating the direction along the line toward the nearest exit.

Vision and communication

  • Masks allow the diver to see clearly underwater and protect the eyes.
    • Full face masks protect the face from dirty or cold water and increases safety by securing the gas supply to the diver's face. If it contains no mouthpiece, the diver can talk, allowing the use of communications equipment.
    • Half masks cover only the eyes and nose. The diver breathes from a separate mouthpiece on the regulator or rebreather.
  • Diving helmets are often used with surface supplied diving. They provide the same benefits as the full face mask but provide a very secure connection of the gas supply to the diver and additionally protect the head.
  • Underwater writing slates and pencils are used to transport pre-dive plans underwater, to record facts whilst underwater and to aid communication with other divers.
  • Dive lights, which are usually waterproof and pressure rated torches or flashlights, are essential for safety in low visibility or dark environments such as night diving and wreck and cave penetration. They are useful for communication and signalling both underwater and on the surface at night. Divers need artificial light even in shallow and clear water to reveal the red end of the spectrum of light which is absorbed as it travels through water. Underwater video lights can serve the same purpose.
  • Hand-held sonar for a diver can provide a synthetic view using ultrasonic signals emitted and processed by an electronic device and displayed on a screen.
  • Ultrasonic signalling devices which attract the buddies attention by vibration have been marketed and may have some limited utility.[3]

Safety equipment

  • Diver's safety harness, to which a lifeline may be attached, including Bell harness, AR vest, Jump jacket.
  • Lifeline (or tether): A line from the diver to a tender at the surface control point, which may be used for:
    • communications, by diving line signals,
    • to allow the diver to be found by the stand-by diver following the line,
    • to provide a guideline to the surface control point to guide the diver on return,
    • to assist the diver to maintain position in a current,
    • in an emergency, to recover the diver to the surface, and
    • in some cases lift the diver out of the water.
  • Shotline: A line connecting a shot weight to a marker buoy, used to mark a dive site and provide a vertical reference for descent and ascent.
  • Buddy line: A short line or strap connecting two divers in the water, used to prevent them from being separated in poor visibility and for communication by line signals.
  • Jonline: A short line or webbing strap to tether the diver to the shotline in a current.
  • Surface marker buoy, which indicates the position of the divers to people at the surface.
  • DSMB - (Delayed, or deployable surface marker buoy), or decompression buoy which is inflated at the start of, or during the ascent, to indicate the position of the divers to the surface team, and as a signal that the divers are ascending.
  • Cutting tool
    • Knife to cut lines, nets or to pry or dig. Not intended for personal protection against underwater predators as it is generally ineffective for this purpose.
    • Diver's net or line cutter. This is a small handheld tool carried by scuba divers to extricate themselves if trapped in fishing net or fishing line. It has a small sharp blade such as a replaceable scalpel blade inside the small notch. There is a small hole at the other end for a lanyard to tether the cutter to the diver.
    • Trauma shears. Very effective as a line cutter, with low risk of inadvertent injury or damage. Usually carried in a pocket or special purpose sheath.
  • Automatic diver recovery devices which inflate the BCD if the diver stops breathing have been marketed. They are not generally used and the risks may outweigh possible benefits.

Surface detection aids

The purposes of this class of personal equipment are to:

Surface detection aids include:

Personal tools and accessories

Polytarp toolbag with bolt snaps for securing to harness
Norwegian diving pioneer Odd Henrik Johnsen with underwater camera (1960's)
  • Camera, strobe (flash), video lights and housing - for underwater photography or underwater videography
  • Diving reel, spool or line holder to store and transport a distance line or line for a surface marker buoy. A spool is a small flanged cylinder with an axial hole, around which a length of line can be wound, and a line holder is a flat H-shaped piece of rigid sheet material on which a length of line can be wound, as an alternative to a reel or spool. The line may be used with a surface marker buoy or a delayed surface marker buoy, where negative buoyancy of the spool or line holder will help with unwinding the line underwater.
  • Dry box to hold objects the diver needs to keep dry at depth (wallet, cell phone)[]
  • Dry bag to carry items that must stay dry on the boat.
  • Dive bag to hold equipment for travel.
  • Tool bag to carry tools that may be required for the job. Various types and sizes are available.
  • A rescue tether is a short lanyard or strap carried by a surface supplied stand-by diver to be used to tether an unresponsive diver to the standby diver during a rescue. It is attached at one end to a D-ring on the stand-by diver's harness, and has a clip at the other end which may be secured to a D-ring on the casualty's harness to allow the rescuer the use of both hands during the return to the bell or surface.
Surface supplied diver rescue tether with soft eye and bolt snap

Diving team tools and equipment

  • A jackstay is a form of guideline laid between two points to guide the diver during a search or to and from the workplace or to support and guide equipment for transport between two points.
  • Lifting bags, an item of diving equipment consisting of a robust and air-tight bag with straps, which is used to lift heavy objects underwater by means of the bag's buoyancy when filled with air.
  • A shot line, consisting of a weight, line and buoy is used to used to mark the location and identify the ascent and descent point of a dive site, allowing divers to navigate to and from the surface and to do decompression stops at a safe location and to help control rate of ascent and descent.
  • Decompression trapeze is used to assist in maintaining correct depth during in-water decompression stops
  • Diving bells and diving stages are used to transport divers from the surface to the underwater workplace.
  • A downline is a line from the surface to underwater workplace used to control descent, ascent and the transfer of tools, materials and other equipment between the surface and the workplace.[4] A weighted version suspended from the surface is used to control working depth when blue-water diving,[5] It is similar in function to a jackstay, with an emphasis on the vertical dimension. The terms are largely interchangeable - a downline can be considered a predominantly vertical jackstay.

Surface support equipment connected with diving and underwater work

International diving flag
Informal Recreational diving flag

Special equipment for underwater work not carried by the diver

  • Remotely operated underwater vehicle - for locating dive sites, observing the environment, conducting visual searches, monitoring divers or performing physical work. Mostly used in professional diving applications.

See also


  1. ^ Beyerstein, G (2006). "Commercial Diving: Surface-Mixed Gas, Sur-D-O2, Bell Bounce, Saturation". In: Lang, MA and Smith, NE (eds). Proceedings of Advanced Scientific Diving Workshop. Smithsonian Institution, Washington, DC. Retrieved .
  2. ^ Halls, Monty (2007). Go scuba dive. Dorling Kindersley. ISBN 978-1405318211.
  3. ^ Gronfeldt, Thomas (11 November 2016). "Gear Review: The Buddy-Watcher". scubadiverlife.com. Retrieved 2017.
  4. ^ Barsky, Steven M.; Christensen, Robert W. (2004). The Simple Guide to Commercial Diving. Hammerhead Press. pp. 78, 92-93. ISBN 9780967430546.
  5. ^ "15: Mixed gas and oxygen diving". The NOAA Diving Manual: Diving for Science and Technology (illustrated ed.). DIANE Publishing. 1992. p. 15.1. ISBN 9781568062310. Retrieved 2016.

External links

Media related to Underwater diving equipment at Wikimedia Commons

  This article uses material from the Wikipedia page available here. It is released under the Creative Commons Attribution-Share-Alike License 3.0.



Music Scenes