English Engineering Units
Get English Engineering Units essential facts below. View Videos or join the English Engineering Units discussion. Add English Engineering Units to your PopFlock.com topic list for future reference or share this resource on social media.
English Engineering Units

Some fields of engineering in the United States use a system of measurement of physical quantities known as the English Engineering Units.[1][2] Despite its name, the system is based on United States customary units of measure.

Definition

The English Engineering Units is a system of consistent units used in the United States. The set is defined by the following units,[3] with a comparison of their their definitive conversions to their International System of Units counterparts.[4]

Dimension English Engineering Unit SI unit Exact conversion
time second (s) second (s) 1 s
length foot (ft) metre (m) 0.3048 m
mass pound mass (lb) kilogram (kg) 0.45359237 kg
force pound-force (lbf) newton (N) 4.4482216152605 N
temperature degree Fahrenheit (°F) degree Celsius (°C) ​ °C
absolute temperature degree Rankine (°R) kelvin (K) ​ °K

Units for other physical quantities are derived from this set as needed.

In English Engineering Units, the pound-mass and the pound-force are distinct base units, and Newton's Second Law of Motion takes the form F= ma/gc, where gc=32.174lb·ft/(lbf·s2).

History and etymology

The term English units strictly refers to the system used in England until 1826, when it was replaced by (more rigorously defined) Imperial units. The United States continued to use the older definitions until the Mendenhall Order of 1893, which established the United States customary units. Nevertheless, the term "English units" persisted in common speech and was adapted as "English engineering units" but these are based on US customary units rather than the pre-1826 English system.

A similar system, termed British Engineering Units by Halliday and Resnick (1974), was a system that used the slug as the unit of mass, and in which Newton's law retains the form F=ma.[5] Modern British engineering practice has used SI base units since at least the late 1970s.[6]

See also

References

  1. ^ Comings, E. W. (1940). "English Engineering Units and Their Dimensions". Ind. Eng. Chem. 32 (7): 984-987. doi:10.1021/ie50367a028.
  2. ^ Klinkenberg, Adrian (1969). "The American Engineering System of Units and Its Dimensional Constant gc". Ind. Eng. Chem. 61 (4): 53-59. doi:10.1021/ie50712a010.
  3. ^ R. Zucker, O. Biblarz (2002). Fundamentals of Gas Dynamics. Hoboken, New Jersey: John Wiley & Sons, Inc. ISBN 0-471-05967-6.
  4. ^ United States. National Bureau of Standards (1959). Research Highlights of the National Bureau of Standards. U.S. Department of Commerce, National Bureau of Standards. p. 13. Retrieved 2019.
  5. ^ Halliday, David; Resnick, Robert (1974). Fundamentals of Physics (revised printing ed.). New York: Wiley. pp. 35, 68-69.
  6. ^ Railway Construction and Operation Requirements - Structural and Electrical Clearances (PDF). London: Department of Transport. 1977. ISBN 0-11-550443-5. Retrieved 2012. "an up-to-date metric guide" (para 1.2)

Notes


  This article uses material from the Wikipedia page available here. It is released under the Creative Commons Attribution-Share-Alike License 3.0.

English_engineering_units
 



 



 
Music Scenes