none, .axf, .bin, .elf, .o, .prx, .puff, .ko, .mod and .so
|Developed by||Unix System Laboratories:3|
|Type of format||Binary, executable, object, shared library, core dump|
|Container for||Many executable binary formats|
In computing, the Executable and Linkable Format (ELF, formerly named Extensible Linking Format), is a common standard file format for executable files, object code, shared libraries, and core dumps. First published in the specification for the application binary interface (ABI) of the Unix operating system version named System V Release 4 (SVR4), and later in the Tool Interface Standard, it was quickly accepted among different vendors of Unix systems. In 1999, it was chosen as the standard binary file format for Unix and Unix-like systems on x86 processors by the 86open project.
By design, the ELF format is flexible, extensible, and cross-platform. For instance it supports different endiannesses and address sizes so it does not exclude any particular central processing unit (CPU) or instruction set architecture. This has allowed it to be adopted by many different operating systems on many different hardware platforms.
Each ELF file is made up of one ELF header, followed by file data. The data can include:
The segments contain information that is needed for run time execution of the file, while sections contain important data for linking and relocation. Any byte in the entire file can be owned by one section at most, and orphan bytes can occur which are unowned by any section.
00000000 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 |.ELF............|
00000010 02 00 3e 00 01 00 00 00 c5 48 40 00 00 00 00 00 |..>......H@.....|
Example hexdump of ELF file header
The ELF header defines whether to use 32-bit or 64-bit addresses. The header contains three fields that are affected by this setting and offset other fields that follow them. The ELF header is 52 or 64 bytes long for 32-bit and 64-bit binaries respectively.
|0x00||4||e_ident[EI_MAG0] through e_ident[EI_MAG3]|
|0x04||1||e_ident[EI_CLASS]||This byte is set to either |
|0x05||1||e_ident[EI_DATA]||This byte is set to either |
|0x06||1||e_ident[EI_VERSION]||Set to |
|0x07||1||e_ident[EI_OSABI]||Identifies the target operating system ABI.
|0x08||1||e_ident[EI_ABIVERSION]||Further specifies the ABI version. Its interpretation depends on the target ABI. Linux kernel (after at least 2.6) has no definition of it, so it is ignored for statically-linked executables. In that case, offset and size of EI_PAD are |
glibc 2.12+ in case e_ident[EI_OSABI] == 3 treats this field as ABI version of the dynamic linker: it defines a list of dynamic linker's features, treats e_ident[EI_ABIVERSION] as a feature level requested by the shared object (executable or dynamic library) and refuses to load it if an unknown feature is requested, i.e. e_ident[EI_ABIVERSION] is greater than the largest known feature.
|0x09||7||e_ident[EI_PAD]||currently unused, should be filled with zeros.|
|0x10||2||e_type||Identifies object file type.
|0x12||2||e_machine||Specifies target instruction set architecture. Some examples are:
|0x14||4||e_version||Set to |
|0x18||4||8||e_entry||This is the memory address of the entry point from where the process starts executing. This field is either 32 or 64 bits long depending on the format defined earlier.|
|0x1C||0x20||4||8||e_phoff||Points to the start of the program header table. It usually follows the file header immediately, making the offset |
|0x20||0x28||4||8||e_shoff||Points to the start of the section header table.|
|0x24||0x30||4||e_flags||Interpretation of this field depends on the target architecture.|
|0x28||0x34||2||e_ehsize||Contains the size of this header, normally 64 Bytes for 64-bit and 52 Bytes for 32-bit format.|
|0x2A||0x36||2||e_phentsize||Contains the size of a program header table entry.|
|0x2C||0x38||2||e_phnum||Contains the number of entries in the program header table.|
|0x2E||0x3A||2||e_shentsize||Contains the size of a section header table entry.|
|0x30||0x3C||2||e_shnum||Contains the number of entries in the section header table.|
|0x32||0x3E||2||e_shstrndx||Contains index of the section header table entry that contains the section names.|
|0x34||0x40||End of ELF Header (size)|
The program header table tells the system how to create a process image. It is found at file offset e_phoff, and consists of e_phnum entries, each with size e_phentsize. The layout is slightly different in 32-bit ELF vs 64-bit ELF, because the p_flags are in a different structure location for alignment reasons. Each entry is structured as:
|0x00||4||p_type||Identifies the type of the segment.
PT_LOOS to PT_HIOS (PT_LOPROC to PT_HIPROC) is an inclusive reserved ranges for operating system (processor) specific semantics.
|0x04||4||p_flags||Segment-dependent flags (position for 64-bit structure).|
|0x04||0x08||4||8||p_offset||Offset of the segment in the file image.|
|0x08||0x10||4||8||p_vaddr||Virtual address of the segment in memory.|
|0x0C||0x18||4||8||p_paddr||On systems where physical address is relevant, reserved for segment's physical address.|
|0x10||0x20||4||8||p_filesz||Size in bytes of the segment in the file image. May be 0.|
|0x14||0x28||4||8||p_memsz||Size in bytes of the segment in memory. May be 0.|
|0x18||4||p_flags||Segment-dependent flags (position for 32-bit structure).|
|0x20||0x38||End of Program Header (size)|
|0x00||4||sh_name||An offset to a string in the .shstrtab section that represents the name of this section.|
|0x04||4||sh_type||Identifies the type of this header.
|0x08||4||8||sh_flags||Identifies the attributes of the section.
|0x0C||0x10||4||8||sh_addr||Virtual address of the section in memory, for sections that are loaded.|
|0x10||0x18||4||8||sh_offset||Offset of the section in the file image.|
|0x14||0x20||4||8||sh_size||Size in bytes of the section in the file image. May be 0.|
|0x18||0x28||4||sh_link||Contains the section index of an associated section. This field is used for several purposes, depending on the type of section.|
|0x1C||0x2C||4||sh_info||Contains extra information about the section. This field is used for several purposes, depending on the type of section.|
|0x20||0x30||4||8||sh_addralign||Contains the required alignment of the section. This field must be a power of two.|
|0x24||0x38||4||8||sh_entsize||Contains the size, in bytes, of each entry, for sections that contain fixed-size entries. Otherwise, this field contains zero.|
|0x28||0x40||End of Section Header (size)|
readelfis a Unix binary utility that displays information about one or more ELF files. A free software implementation is provided by GNU Binutils.
elfutilsprovides alternative tools to GNU Binutils purely for Linux.
elfdumpis a command for viewing ELF information in an ELF file, available under Solaris and FreeBSD.
objdumpprovides a wide range of information about ELF files and other object formats.
objdumpuses the Binary File Descriptor library as a back-end to structure the ELF data.
fileutility can display some information about ELF files, including the instruction set architecture for which the code in a relocatable, executable, or shared object file is intended, or on which an ELF core dump was produced.
ELF has also seen some adoption in non-Unix operating systems, such as:
Some game consoles also use ELF:
Other (operating) systems running on PowerPC that use ELF:
Some operating systems for mobile phones and mobile devices use ELF:
Some phones can run ELF files through the use of a patch that adds assembly code to the main firmware, which is a feature known as ELFPack in the underground modding culture. The ELF file format is also used with the Atmel AVR (8-bit), AVR32 and with Texas Instruments MSP430 microcontroller architectures. Some implementations of Open Firmware can also load ELF files, most notably Apple's implementation used in almost all PowerPC machines the company produced.
The Linux Standard Base (LSB) supplements some of the above specifications for architectures in which it is specified. For example, that is the case for the System V ABI, AMD64 Supplement.
86open was a project to form consensus on a common binary file format for Unix and Unix-like operating systems on the common PC compatible x86 architecture, to encourage software developers to port to the architecture. The initial idea was to standardize on a small subset of Spec 1170, a predecessor of the Single UNIX Specification, and the GNU C Library (glibc) to enable unmodified binaries to run on the x86 Unix-like operating systems. The project was originally designated "Spec 150".
The format eventually chosen was ELF, specifically the Linux implementation of ELF, after it had turned out to be a de facto standard supported by all involved vendors and operating systems.
The group began email discussions in 1997 and first met together at the Santa Cruz Operation offices on August 22, 1997.
The steering committee was Marc Ewing, Dion Johnson, Evan Leibovitch, Bruce Perens, Andrew Roach, Bryan Wayne Sparks and Linus Torvalds. Other people on the project were Keith Bostic, Chuck Cranor, Michael Davidson, Chris G. Demetriou, Ulrich Drepper, Don Dugger, Steve Ginzburg, Jon "maddog" Hall, Ron Holt, Jordan Hubbard, Dave Jensen, Kean Johnston, Andrew Josey, Robert Lipe, Bela Lubkin, Tim Marsland, Greg Page, Ronald Joe Record, Tim Ruckle, Joel Silverstein, Chia-pi Tien, and Erik Troan. Operating systems and companies represented were BeOS, BSDI, FreeBSD, Intel, Linux, NetBSD, SCO and SunSoft.
The project progressed and in mid-1998, SCO began developing lxrun, an open-source compatibility layer able to run Linux binaries on OpenServer, UnixWare, and Solaris. SCO announced official support of lxrun at LinuxWorld in March 1999. Sun Microsystems began officially supporting lxrun for Solaris in early 1999, and later moved to integrated support of the Linux binary format via Solaris Containers for Linux Applications.
With the BSDs having long supported Linux binaries (through a compatibility layer) and the main x86 Unix vendors having added support for the format, the project decided that Linux ELF was the format chosen by the industry and "declare[d] itself dissolved" on July 25, 1999.
FatELF is an ELF binary-format extension that adds fat binary capabilities. It is aimed for Linux and other Unix-like operating systems. Additionally to the CPU architecture abstraction (byte order, word size, CPU instruction set etc.), there is the potential advantage of software-platform abstraction e.g., binaries which support multiple kernel ABI versions. As of 25 April 2020 , FatELF has not been integrated into the mainline Linux Kernel.
Dynamically linked libraries are also called shared objects (.so).