|A Piedmont F28-1000 on approach|
|First flight||9 May 1967|
|Introduction||28 March 1969 with Braathens SAFE|
|Status||In military service|
|Primary user||Garuda Indonesia (historical)|
AirQuarius Aviation (historical)
Biman Bangladesh Airlines (historical)
Mk 1000: US$2.9M, Mk 2000: US$3M (1970) US$19-19M today
Following the F27 Friendship, an early and commercially successful turboprop-powered regional airliner, Fokker decided to embark on developing a new turbojet-powered commuter aircraft that would build upon its experiences with the F27. During the design phase, a high level of attention was paid to market research and operator concerns; amongst other changes made, the prospective jetliner was increased in size, changing its maximum seating capacity from 50 to 65 passengers. During April 1962, Fokker announced the formal launch of the F28 Fellowship.
On 9 May 1967, the prototype F28-1000 conducted its maiden flight. Type certification was achieved on 24 February 1969, and the first revenue-earning flight by Braathens was performed on 28 March 1969. Following its entry to service, Fokker developed multiple variants of the F28; one model, the F28-2000, featured an extended fuselage that could accommodate up to 79 passengers. A major revision was the F28-4000, which was powered by quieter Rolls-Royce Spey 555-15H engines, a redesigned cockpit, a modified wing, and had a further increased seating capacity of up to 85 passengers. During 1987, production of the type was terminated in favour of two newer derivatives, the Fokker 70 and the larger Fokker 100.
By 1960, Dutch aircraft manufacturer Fokker was engaged in multiple programmes; these included military aircraft such as the Bréguet Br.1150 Atlantic and the Lockheed F-104 Starfighter, as well as the commercially successful turboprop-powered F27 Friendship airliner. Around this time, British European Airways (BEA) released a specification that called for a high speed regional airliner powered by turbojet engines. In response, Fokker took an interest in developing its own turbojet-powered short-haul airliner. According to aviation publication Flying, Fokker's prospective jetliner design was heavily shaped by feedback and experiences from its existing customers of the F27, particularly those in the crucial North American market. As such, American design methodologies and preferences were incorporated, reportedly emphasising simplicity, as well as efforts to minimise both language and trade barriers.
During April 1962, Dutch aircraft manufacturer Fokker announced the launch of the F28 Fellowship. The programme was a collaborative effort conducted between a number of European companies, namely Fokker itself, West German aerospace companies Messerschmitt-Bölkow-Blohm (MBB) and VFW-Fokker, as well as Short Brothers of Northern Ireland. Substantial government funding was also invested in the project; reportedly, the Dutch government provided 50% of Fokker's stake while the West German government contributed 60% of the overall 35% German stake. Fokker has also approached several other aviation companies with offers of involvement, including France's Sud Aviation and Britain's Hawker Siddeley.
Initial design work centered on an aircraft capable of transport a maximum of 50 passengers across distances of up to 1,650 km (1,025 mi), the design was later modified so that it could accommodate up to 65 seats in a five-abreast configuration, noticeably increasing its maximum takeoff weight (MTOW), on the basis of market research. The enlarged aircraft was roughly comparable in capacity to that of the British Vickers Viscount, a successful turboprop airliner. The design was capable of speeds well in excess of turboprop-powered competitors, but retained a relatively low cruise speed in comparison to contemporary jet-powered designs, facilitating its use of a relatively straight low-mounted wing and achieving favourable low-speed characteristics as to enable the type's use from 85% of existing airports used by the F27 and the ubiquitous Douglas DC-3. According to Flying, the tentative airliner could achieve double the productivity of the preceding F27, while the company itself referred to the jetliner as a compliment to its turboprop-powered sibling.
At one stage of development, Fokker had reportedly intended for the F28 to be powered by a pair of Bristol Siddeley BS.75 turbofans. However, this selection was hotly contested by rival British engine manufacturer Rolls-Royce, who put forward their Rolls-Royce Spey Junior, a simplified version of the Rolls-Royce Spey. Rolls-Royce ultimately emerged victorious, from the first prototype onwards, the type would be exclusively powered by various models of the Spey engine.
The responsibility for both design and production of the F28 was divided between the partner companies. Fokker designed and built the nose section, centre fuselage and inner wing; MBB/Fokker-VFW constructed the forward fuselage, rear fuselage and tail assembly; while Shorts designed and produced the outer wings. Final assembly of the Fokker F28 was at Schiphol Airport in the Netherlands. At one point, American manufacturer Fairchild Aircraft had considered locally-producing their own derivative of the F28, which was referred to as the Fairchild 228, but this ultimately did not reach production, deciding to act as a distributor for the existing F28 instead. During 1987, production of the type was terminated in favour of two newer derivative airliners, the Fokker 70 and the larger Fokker 100; by this point, a total of 241 airframes had been constructed.
The Fokker F28 Fellowship was a short-haul twin-engine jetliner, sharing broad similarities to the British Aircraft Corporation's BAC One-Eleven and American Douglas DC-9 in terms of basic configuration, featuring a T-tail and engines mounted at the rear of the fuselage. The choice of a low-mounted wing, amongst other benefits, somewhat shielded the tail-mounted engines from the threat of foreign object damage. Fuel is stored within both the outer wing and within the fuselage; additional pylon-mounted tanks could be installed for extended range operations if so required. The structure, which features a fail-safe design, is constructed using the same bonding techniques previously pioneered for the F27.
The F28 was equipped with wings that had a slight crescent angle of sweep. It uses conventional box construction, being built in two pieces separately spliced onto the fuselage. The wing was furnished with ailerons positioned near the tips, along with simplistic flaps that would be supplemented by the ailerons during landing approaches; all of the flight control surfaces were actuated via duplicated cabling and (except for the rudder) aerodynamically balanced. It was also fitted with a five-section lift-dumper that would only be operated after landing, it was decided to employ a lift-dumper rather than alternatives such as thrust reversers as the designers felt that this arrangement would result in a reduction in both weight and maintenance workload. Excluding the use of thrust reversers also meant that there was less chance of the engines ingesting debris when being operated upon unpaved airstrips. The wing also had a fixed leading edge (although one experimental model had leading edge slats and these were offered as an option) and was de-iced via bleed air drawn from the engines.
The F28 is powered by a pair of Rolls-Royce Spey turbojet engines; dependent on model, these would be were capable of generating up to 9,850lbf / 43.9kN of thrust. While the feature was available at the time, Fokker chose not to equip the engines of early F28s with a water-methanol injection system as they determined that the engines already possessed sufficient performance even when being flown under hot-and-high conditions. The majority of onboard systems are designed with simplicity in terms of operability and serviceability; there was no hydraulic system, actuation of the undercarriage and steering relied on pneumatic pumps instead. However, the F28 was outfitted with comparatively advanced electronics, as Fokker's design team viewed this factor as directly relating to overall competitiveness.
One uncommon feature of the F28 was the movable split-sections installed upon the tail cone; these would be hydraulically-opened outwards to act as a variable air brake. A similar approach had also been used on the contemporaneous Blackburn Buccaneer strike fighter and on the later-built British Aerospace 146 regional airliner. The design is unique in that it not only slows the aircraft down rapidly, it can aid in rapid descents from economic cruising altitudes and also allowed the engines to be set at higher RPM which helped eliminate 'lag time'. This means the engines respond faster if needed for sudden speed increases or go-arounds on the approach to landing. The Fellowship had a retractable tricycle landing gear which used large low pressure tyres, enabling the use of unpaved airstrips. The use of anti-skid brakes on the main wheels of the undercarriage also contributed to a shorter landing run.
The F28-1000 prototype, registered PH-JHG, first flew on 9 May 1967, flown by Chief Test Pilot Jas Moll, Test Pilot Abe van der Schraaf and Flight Engineer Cees Dik. Type certification from West German authorities was achieved on 24 February 1969, clearing the F28 toenter revenue service. While the first order for the type had been placed by German airline LTU, the first revenue-earning flight was conducted by Braathens, who eventually operated a fleet of five F28s, on 28 March 1969.
A variant of the F28, equipped with an extended fuselage, was named F28-2000; this model could seat up to 79 passengers instead of the 65 seats on the F28-1000. The prototype for this model was a converted F28-1000 prototype, and first flew on 28 April 1971. The models F28-6000 and F28-5000 were modified F28-2000 and F28-1000 respectively; the main features of these models was the addition of slats, a greater wingspan, and the adoption of more powerful and quieter engines. Both the F28-6000 and F28-5000 failed to become commercial successes; only two F28-6000 and no F28-5000 were ultimately built. After being used by Fokker for a time, the F28-6000 were sold to Air Mauritanie, but not before being converted to F28-2000 standard.
Perhaps the most successful model of the F28 was the F28-4000, which debuted on 20 October 1976 with one of the world's largest Fokker operators, Linjeflyg. This version was powered by quieter Spey 555-15H engines, and had an increased seating capacity (up to 85 passengers), a larger wingspan with reinforced wings, a new cockpit and a new "wide-look" interior featuring enclosed overhead lockers and a less 'tubular' look. The F28-3000, the successor to the F28-1000, featured the same improvements as the F28-4000.
The F28s of Ansett Transport Industries' Western Australian intrastate airline, MacRobertson Miller Airlines of Western Australia, flew the longest non-stop F28 route in the world, from Perth to Kununurra, in Western Australia - a distance of about 2,240 km (1,392 mi). This was also the world's longest twin-jet route at the time.[when?] MMA'a F28's also had the highest utilisation rates at the time, flying over 8 hours per day.
In August 2006 a total of 92 Fokker F28 aircraft remained in airline service. Major operators included: MacRobertson Miller Airlines, Ansett Group Australia (more than 15), Toumaï Air Tchad (1), AirQuarius Aviation (3), SkyLink Arabia (1), Satena (1), Gatari Air Service (2), LADE (1), AirQuarius Aviation (4) and Merpati Nusantara Airlines (1). Biman Bangladesh Airlines (8). Some 22 airlines operated smaller numbers of the type. As of July 2018, Fly-SAX is the only airline operator of the F28 worldwide with 1 aircraft in service.Garuda Indonesia had the most F28s, with 62 of the aircraft in the former fleet. All have since been retired.
The following is a list of Fokker F28 accidents and incidents:
|Hold||459 cu.ft / 13m³||559 cu.ft / 15.9m³||459 cu.ft / 13 m³|
|Length||89ft 10in /27.4m||97ft 2in / 29.6m||89ft 10.7in / 27.4m|
|Height||27ft 9.5in / 8.47m|
|Wingspan||77ft 4in / 23.6m||82ft 3in / 25.07m|
|Wing||822ft² / 76.4m², 16° sweep, 7.3:1 AR||850ft² / 79m², 16° sweep, 8:1 AR|
|Max takeoff weight||65,000lb / 29,480 kg||73,000lb / 33,110 kg|
|Empty weight||35,517lb / 16,144kg||36,953 / 16,707kg||38,825lb / 17,611 kg||37,139lb / 16,846kg|
|Max payload||18,983 / 8,629kg||17,547 / 7,976kg||23,317lb / 10,556kg||19,003lb / 8,620kg|
|Max Fuel||2,869 Imp Gal / 13,040 l|
|2× Turbofans||Rolls-Royce Spey Mk 555-15||Rolls-Royce Spey Mk 555-15H|
|Unit thrust||9,850lbf / 43.9kN|
|Cruise||458kn / 848km/h Max, 359kn / 666 km/h LR||436kn / 808km/h Max, 354kn / 656 km/h LR|
|Fuel Consumption||6,180lb/h / 2,800kg/h Max, 3,260lb/h / 1,480kg/h LR||4,980lb/h / 2,260kg/h Max, 3,252lb/h / 1,475kg/h LR|
|Max PL Range||920nmi / 1,705km||900nmi / 1,668km||1,550nmi / 2,872 km|
|Takeoff (MTOW, ISA, SL)||5,500ft / 1,676m|
|Landing (MLW, SL)||3,540ft / 1,079m||3,495ft /1,065m||3,173ft / 967m|
|Service ceiling||35,000 ft (10,700 m)|
Aircraft of comparable role, configuration and era