Fresnel Coefficients

Get Fresnel Coefficients essential facts below. View Videos or join the Fresnel Coefficients discussion. Add Fresnel Coefficients to your PopFlock.com topic list for future reference or share this resource on social media.
## Overview

### S and P polarizations

## Power (intensity) reflection and transmission coefficients

### Special cases

#### Normal incidence

#### Brewster's angle

#### Total internal reflection

## Complex amplitude reflection and transmission coefficients

### Alternative forms

## Multiple surfaces

## History

## Theory

### Material parameters

### Electromagnetic plane waves

### The wave vectors

### The *s* components

### The *p* components

### Power ratios (reflectivity and transmissivity)

### Equal refractive indices

### Non-magnetic media

### Brewster's angle

### Equal permittivities

## See also

## Notes

## References

## Sources

## Further reading

## External links

This article uses material from the Wikipedia page available here. It is released under the Creative Commons Attribution-Share-Alike License 3.0.

Fresnel Coefficients

The **Fresnel equations** (or **Fresnel coefficients**) describe the reflection and transmission of light (or electromagnetic radiation in general) when incident on an interface between different optical media. They were deduced by Augustin-Jean Fresnel who was the first to understand that light is a transverse wave, even though no one realized that the "vibrations" of the wave were electric and magnetic fields. For the first time, polarization could be understood quantitatively, as Fresnel's equations correctly predicted the differing behaviour of waves of the *s* and *p* polarizations incident upon a material interface.

When light strikes the interface between a medium with refractive index *n*_{1} and a second medium with refractive index *n*_{2}, both reflection and refraction of the light may occur. The Fresnel equations describe the ratios of the reflected and transmitted waves' electric fields to the incident wave's electric field (the waves' magnetic fields can also be related using similar coefficients). Since these are complex ratios, they describe not only the relative amplitude, but phase shifts between the waves.

The equations assume the interface between the media is flat and that the media are homogeneous and isotropic.^{[1]} The incident light is assumed to be a plane wave, which is sufficient to solve any problem since any incident light field can be decomposed into plane waves and polarizations.

There are two sets of Fresnel coefficients for two different linear polarization components of the incident wave. Since any polarization state can be resolved into a combination of two orthogonal linear polarizations, this is sufficient for any problem. Likewise, unpolarized (or "randomly polarized") light has an equal amount of power in each of two linear polarizations.

The s polarization refers to polarization of a wave's electric field *normal* to the plane of incidence (the z direction in the derivation below); then the magnetic field is *in* the plane of incidence. The p polarization refers to polarization of the electric field *in* the plane of incidence (the xy plane in the derivation below); then the magnetic field is *normal* to the plane of incidence.

Although the reflectivity and transmission are dependent on polarization, at normal incidence (*?* = 0) there is no distinction between them so all polarization states are governed by a single set of Fresnel coefficients (and another special case is mentioned below in which that is true).

In the diagram on the right, an incident plane wave in the direction of the ray **IO** strikes the interface between two media of refractive indices *n*_{1} and *n*_{2} at point **O**. Part of the wave is reflected in the direction **OR**, and part refracted in the direction **OT**. The angles that the incident, reflected and refracted rays make to the normal of the interface are given as *?*_{i}, *?*_{r} and *?*_{t}, respectively.

The relationship between these angles is given by the law of reflection:

and Snell's law:

The behavior of light striking the interface is solved by considering the electric and magnetic fields that constitute an electromagnetic wave, and the laws of electromagnetism, as shown below. The ratio of waves' electric field (or magnetic field) amplitudes are obtained, but in practice one is more often interested in formulae which determine *power* coefficients, since power (or irradiance) is what can be directly measured at optical frequencies. The power of a wave is generally proportional to the square of the electric (or magnetic) field amplitude.

We call the fraction of the incident power that is reflected from the interface the reflectance (or "reflectivity", or "power reflection coefficient") *R*, and the fraction that is refracted into the second medium is called the transmittance (or "transmissivity", or "power transmission coefficient") *T* . Note that these are what would be measured right *at* each side of an interface and do not account for attenuation of a wave in an absorbing medium *following* transmission or reflection.^{[2]}

The reflectance for s-polarized light is

while the reflectance for p-polarized light is

where *Z*_{1} and *Z*_{2} are the wave impedances of media 1 and 2, respectively.

We assume that the media are non-magnetic (i.e., *?*_{1} = *?*_{2} = *?*_{0}), which is typically a good approximation at optical frequencies (and for transparent media at other frequencies).^{[3]} Then the wave impedances are determined solely by the refractive indices *n*_{1} and *n*_{2}:

where *Z*_{0} is the impedance of free space and i = 1, 2. Making this substitution, we obtain equations using the refractive indices:

The second form of each equation is derived from the first by eliminating *?*_{t} using Snell's law and trigonometric identities.

As a consequence of conservation of energy, one can find the transmitted power (or more correctly, irradiance: power per unit area) simply as the portion of the incident power that isn't reflected: ^{[4]}

and

Note that all such intensities are measured in terms of a wave's irradiance in the direction normal to the interface; this is also what is measured in typical experiments. That number could be obtained from irradiances *in the direction of an incident or reflected wave* (given by the magnitude of a wave's Poynting vector) multiplied by cos *?* for a wave at an angle *?* to the normal direction (or equivalently, taking the dot product of the Poynting vector with the unit vector normal to the interface). This complication can be ignored in the case of the reflection coefficient, since cos *?*_{i} = cos *?*_{r}, so that the ratio of reflected to incident irradiance in the wave's direction is the same as in the direction normal to the interface.

Although these relationships describe the basic physics, in many practical applications one is concerned with "natural light" that can be described as unpolarized. That means that there is an equal amount of power in the *s* and *p* polarizations, so that the *effective* reflectivity of the material is just the average of the two reflectivities:

For low-precision applications involving unpolarized light, such as computer graphics, rather than rigorously computing the effective reflection coefficient for each angle, Schlick's approximation is often used.

For the case of normal incidence, , and there is no distinction between s and p polarization. Thus, the reflectance simplifies to

- .

For common glass (*n*_{2} ? 1.5) surrounded by air (*n*_{1} = 1), the power reflectance at normal incidence can be seen to be about 4%, or 8% accounting for both sides of a glass pane.

At a dielectric interface from *n*_{1} to *n*_{2}, there is a particular angle of incidence at which *R*_{p} goes to zero and a p-polarised incident wave is purely refracted. This angle is known as Brewster's angle, and is around 56° for *n*_{1} = 1 and *n*_{2} = 1.5 (typical glass).

When light travelling in a denser medium strikes the surface of a less dense medium (i.e., *n*_{1} > *n*_{2}), beyond a particular incidence angle known as the *critical angle*, all light is reflected and *R*_{s} = *R*_{p} = 1. This phenomenon, known as total internal reflection, occurs at incidence angles for which Snell's law predicts that the sine of the angle of refraction would exceed unity (whereas in fact sin *?* ?). For glass with *n* = 1.5 surrounded by air, the critical angle is approximately 41°.

The above equations relating powers (which could be measured with a photometer for instance) are derived from the Fresnel equations which solve the physical problem in terms of electromagnetic field complex amplitudes, i.e., considering phase in addition to power (which is important in multipath propagation for instance). Those underlying equations supply generally complex-valued ratios of those EM fields and may take several different forms, depending on formalisms used. The complex amplitude coefficients are usually represented by lower case *r* and *t* (whereas the power coefficients are capitalized).

In the following, the reflection coefficient *r* is the ratio of the reflected wave's electric field complex amplitude to that of the incident wave. The transmission coefficient *t* is the ratio of the transmitted wave's electric field complex amplitude to that of the incident wave. We require separate formulae for the *s* and *p* polarizations. In each case we assume an incident plane wave at an angle of incidence on a plane interface, reflected at an angle , and with a transmitted wave at an angle , corresponding to the above figure. Note that in the cases of an interface into an absorbing material (where *n* is complex) or total internal reflection, the angle of transmission might not evaluate to a real number.

We consider the sign of a wave's electric field in relation to a wave's direction. Consequently, for *p* polarization at normal incidence, the positive direction of electric field for an incident wave (to the left) is *opposite* that of a reflected wave (also to its left); for *s* polarization both are the same (upward).^{[Note 1]}

Using these conventions,^{[5]}^{[6]}

One can see that *t*_{s} = *r*_{s} + 1^{[7]} and *t*_{p}=*r*_{p}+1. One can write similar equations applying to the ratio of magnetic fields of the waves, but these are usually not required.

Because the reflected and incident waves propagate in the same medium and make the same angle with the normal to the surface, the power reflection coefficient R is just the squared magnitude of *r*: ^{[8]}

On the other hand, calculation of the power transmission coefficient T is less straightforward, since the light travels in different directions in the two media. What's more, the wave impedances in the two media differ; power is only proportional to the square of the amplitude when the media's impedances are the same (as they are for the reflected wave). This results in:^{[9]}

The factor of *n*_{2}/*n*_{1} is the reciprocal of the ratio of the media's wave impedances (since we assume *?* = *?*_{0}). The factor of cos(*?*_{t})/cos(*?*_{i}) is from expressing power *in the direction* normal to the interface, for both the incident and transmitted waves.

In the case of total internal reflection where the power transmission T is zero, t nevertheless describes the electric field (including its phase) just beyond the interface. This is an evanescent field which does not propagate as a wave (thus T = 0) but has nonzero values very close to the interface. The phase shift of the reflected wave on total internal reflection can similarly be obtained from the phase angles of *r*_{p} and *r*_{s} (whose magnitudes are unity). These phase shifts are different for *s* and *p* waves, which is the well-known principle by which total internal reflection is used to effect polarization transformations.

In the above formula for *r*_{s}, if we put (Snell's law) and multiply the numerator and denominator by sin *?*_{t}, we obtain ^{[10]}^{[11]}

If we do likewise with the formula for *r*_{p}, the result is easily shown to be equivalent to ^{[12]}^{[13]}

These formulas ^{[14]}^{[15]}^{[16]} are known respectively as *Fresnel's sine law* and *Fresnel's tangent law*.^{[17]} Although at normal incidence these expressions reduce to 0/0, one can see that they yield the correct results in the limit as *?*_{i} -> 0.

When light makes multiple reflections between two or more parallel surfaces, the multiple beams of light generally interfere with one another, resulting in net transmission and reflection amplitudes that depend on the light's wavelength. The interference, however, is seen only when the surfaces are at distances comparable to or smaller than the light's coherence length, which for ordinary white light is few micrometers; it can be much larger for light from a laser.

An example of interference between reflections is the iridescent colours seen in a soap bubble or in thin oil films on water. Applications include Fabry-Pérot interferometers, antireflection coatings, and optical filters. A quantitative analysis of these effects is based on the Fresnel equations, but with additional calculations to account for interference.

The transfer-matrix method, or the recursive Rouard method ^{[18]} can be used to solve multiple-surface problems.

In 1808, Étienne-Louis Malus discovered that when a ray of light was reflected off a non-metallic surface at the appropriate angle, it behaved like *one* of the two rays emerging from a doubly-refractive calcite crystal.^{[19]} He later coined the term *polarization* to describe this behavior. In 1815, the dependence of the polarizing angle on the refractive index was determined experimentally by David Brewster.^{[20]} But the *reason* for that dependence was such a deep mystery that in late 1817, Thomas Young was moved to write:

[T]he great difficulty of all, which is to assign a sufficient reason for the reflection or nonreflection of a polarised ray, will probably long remain, to mortify the vanity of an ambitious philosophy, completely unresolved by any theory.

^{[21]}

In 1821, however, Augustin-Jean Fresnel derived results equivalent to his sine and tangent laws (above), by modeling light waves as transverse elastic waves with vibrations perpendicular to what had previously been called the plane of polarization. Fresnel promptly confirmed by experiment that the equations correctly predicted the direction of polarization of the reflected beam when the incident beam was polarized at 45° to the plane of incidence, for light incident from air onto glass or water; in particular, the equations gave the correct polarization at Brewster's angle.^{[22]} The experimental confirmation was reported in a "postscript" to the work in which Fresnel first revealed his theory that light waves, including "unpolarized" waves, were *purely* transverse.^{[23]}

Details of Fresnel's derivation, including the modern forms of the sine law and tangent law, were given later, in a memoir read to the French Academy of Sciences in January 1823.^{[24]} That derivation combined conservation of energy with continuity of the *tangential* vibration at the interface, but failed to allow for any condition on the *normal* component of vibration.^{[25]} The first derivation from *electromagnetic* principles was given by Hendrik Lorentz in 1875.^{[26]}

In the same memoir of January 1823,^{[24]} Fresnel found that for angles of incidence greater than the critical angle, his formulas for the reflection coefficients (*r*_{s} and *r*_{p}) gave complex values with unit magnitudes. Noting that the magnitude, as usual, represented the ratio of peak amplitudes, he guessed that the argument represented the phase shift, and verified the hypothesis experimentally.^{[27]} The verification involved

- calculating the angle of incidence that would introduce a total phase difference of 90° between the s and p components, for various numbers of total internal reflections at that angle (generally there were two solutions),
- subjecting light to that number of total internal reflections at that angle of incidence, with an initial linear polarization at 45° to the plane of incidence, and
- checking that the final polarization was circular.
^{[28]}

Thus he finally had a quantitative theory for what we now call the *Fresnel rhomb* -- a device that he had been using in experiments, in one form or another, since 1817 (see *Fresnel rhomb § History*).

The success of the complex reflection coefficient inspired James MacCullagh and Augustin-Louis Cauchy, beginning in 1836, to analyze reflection from metals by using the Fresnel equations with a complex refractive index.^{[29]}

Four weeks before he presented his completed theory of total internal reflection and the rhomb, Fresnel submitted a memoir ^{[30]} in which he introduced the needed terms *linear polarization*, *circular polarization*, and *elliptical polarization*,^{[31]} and in which he explained optical rotation as a species of birefringence: linearly-polarized light can be resolved into two circularly-polarized components rotating in opposite directions, and if these propagate at different speeds, the phase difference between them -- hence the orientation of their linearly-polarized resultant -- will vary continuously with distance.^{[32]}

Thus Fresnel's interpretation of the complex values of his reflection coefficients marked the confluence of several streams of his research and, arguably, the essential completion of his reconstruction of physical optics on the transverse-wave hypothesis (see *Augustin-Jean Fresnel*).

Here we systematically derive the above relations from electromagnetic premises.

In order to compute meaningful Fresnel coefficients, we must assume that the medium is (approximately) linear and homogeneous. If the medium is also isotropic, the four field vectors **E**, **B**, **D**, **H** are related by

**D**=*?***E****B**=*?***H**,

where *?* and *?* are scalars, known respectively as the (electric) *permittivity* and the (magnetic) *permeability* of the medium. For a vacuum, these have the values *?*_{0} and *?*_{0}, respectively. Hence we define the *relative* permittivity (or dielectric constant) *?*_{rel} = *?*/*?*_{0} , and the *relative* permeability *?*_{rel} = *?*/*?*_{0}.

In optics it is common to assume that the medium is non-magnetic, so that *?*_{rel} = 1. For ferromagnetic materials at radio/microwave frequencies, larger values of *?*_{rel} must be taken into account. But, for optically transparent media, and for all other materials at optical frequencies (except possible metamaterials), *?*_{rel} is indeed very close to 1; that is, *?* ? *?*_{0}.

In optics, one usually knows the refractive index *n* of the medium, which is the ratio of the speed of light in a vacuum (c) to the speed of light in the medium. In the analysis of partial reflection and transmission, one is also interested in the electromagnetic wave impedance Z, which is the ratio of the amplitude of **E** to the amplitude of **H**. It is therefore desirable to express *n* and Z in terms of *?* and *?*, and thence to relate Z to *n*. The last-mentioned relation, however, will make it convenient to derive the reflection coefficients in terms of the wave *admittance* Y, which is the reciprocal of the wave impedance Z.

In the case of *uniform plane sinusoidal* waves, the wave impedance or admittance is known as the *intrinsic* impedance or admittance of the medium. This case is the one for which the Fresnel coefficients are to be derived.

In a uniform plane sinusoidal electromagnetic wave, the electric field **E** has the form

where **E _{k}** is the (constant) complex amplitude vector,

To advance the phase by the angle *?*, we replace *?t* by *?t+?* (that is, we replace *-?t* by *-?t-?*), with the result that the (complex) field is multiplied by *e ^{-i?}*. So a phase

If *l* is the component of **r** in the direction of **k** , the field (**1**) can be written **E _{k}**

As usual, we drop the time-dependent factor *e ^{-i?t}* which is understood to multiply every complex field quantity. The electric field for a uniform plane sine wave will then be represented by the location-dependent

For fields of that form, Faraday's law and the Maxwell-Ampère law respectively reduce to ^{[33]}

Putting **B** = *?***H** and **D** = *?***E** , as above, we can eliminate **B** and **D** to obtain equations in only **E** and **H**:

If the material parameters *?* and *?* are real (as in a lossless dielectric), these equations show that **k** , **E** , **H** form a *right-handed orthogonal triad*, so that the same equations apply to the magnitudes of the respective vectors. Taking the magnitude equations and substituting from (**2**), we obtain

where H and E are the magnitudes of **H** and **E**. Multiplying the last two equations gives

Dividing (or cross-multiplying) the same two equations gives *H = YE* , where

This is the *intrinsic admittance*.

From (**4**) we obtain the phase velocity . For a vacuum this reduces to . Dividing the second result by the first gives

- .

For a *non-magnetic* medium (the usual case), this becomes .

(Taking the reciprocal of (**5**), we find that the intrinsic *impedance* is . In a vacuum this takes the value known as the impedance of free space. By division, . For a *non-magnetic* medium, this becomes )

In Cartesian coordinates (*x*, *y*,*z*), let the region *y* < 0 have refractive index *n*_{1} , intrinsic admittance *Y*_{1} , etc., and let the region *y* > 0 have refractive index *n*_{2} , intrinsic admittance *Y*_{2} , etc. Then the *xz* plane is the interface, and the *y* axis is normal to the interface (see diagram). Let **i** and **j** (in bold roman type) be the unit vectors in the *x* and *y* directions, respectively. Let the plane of incidence be the *xy* plane (the plane of the page), with the angle of incidence *?*_{i} measured from **j** towards **i**. Let the angle of refraction, measured in the same sense, be *?*_{t} , where the subscript *t* stands for *transmitted* (reserving *r* for *reflected*).

In the absence of Doppler shifts, *?* does not change on reflection or refraction. Hence, by (**2**), the magnitude of the wave vector is proportional to the refractive index.

So, for a given *?*, if we *redefine* k as the magnitude of the wave vector in the *reference* medium (for which *n* = 1), then the wave vector has magnitude *n*_{1}*k* in the first medium (region *y* < 0 in the diagram) and magnitude *n*_{2}*k* in the second medium. From the magnitudes and the geometry, we find that the wave vectors are

where the last step uses Snell's law. The corresponding dot products in the phasor form (**3**) are

Hence:

For the *s* polarization, the **E** field is parallel to the *z* axis and may therefore be described by its component in the *z* direction. Let the reflection and transmission coefficients be *r*_{s} and *t*_{s} , respectively. Then, if the incident **E** field is taken to have unit amplitude, the phasor form (**3**) of its *z* component is

and the reflected and transmitted fields, in the same form, are

Under the sign convention used in this article, a positive reflection or transmission coefficient is one that preserves the direction of the *transverse* field, meaning (in this context) the field normal to the plane of incidence. For the *s* polarization, that means the **E** field. If the incident, reflected, and transmitted **E** fields (in the above equations) are in the *z* direction ("out of the page"), then the respective **H** fields are in the directions of the red arrows, since **k** , **E** , **H** form a right-handed orthogonal triad. The **H** fields may therefore be described by their components in the directions of those arrows, denoted by *H*_{i} , *H*_{r} , *H*_{t} . Then, since *H = YE* ,

At the interface, by the usual interface conditions for electromagnetic fields, the tangential components of the **E** and **H** fields must be continuous; that is,

When we substitute from equations (**8**) to (**10**) and then from (**7**), the exponential factors cancel out, so that the interface conditions reduce to the simultaneous equations

which are easily solved for *r*_{s} and *t*_{s} , yielding

and

At *normal incidence* (*? _{i} = ?_{t} =* 0), indicated by an additional subscript 0, these results become

and

At *grazing incidence* (*?*_{i} -> 90°), we have cos *?*_{i} -> 0 , hence *r*_{s} -> -1 and *t*_{s} -> 0.

For the *p* polarization, the incident, reflected, and transmitted **E** fields are parallel to the red arrows and may therefore be described by their components in the directions of those arrows. Let those components be *E*_{i} , *E*_{r} , *E*_{t} (redefining the symbols for the new context). Let the reflection and transmission coefficients be *r*_{p} and *t*_{p}. Then, if the incident **E** field is taken to have unit amplitude, we have

If the **E** fields are in the directions of the red arrows, then, in order for **k** , **E** , **H** to form a right-handed orthogonal triad, the respective **H** fields must be in the *-z* direction ("into the page") and may therefore be described by their components in that direction. This is consistent with the adopted sign convention, namely that a positive reflection or transmission coefficient is one that preserves the direction of the transverse field (the **H** field in the case of the *p* polarization). The agreement of the *other* field with the red arrows reveals an alternative definition of the sign convention: that a positive reflection or transmission coefficient is one for which the field vector in the plane of incidence points towards the same medium before and after reflection or transmission.^{[34]}

So, for the incident, reflected, and transmitted **H** fields, let the respective components in the *-z* direction be *H*_{i} , *H*_{r} , *H*_{t} . Then, since *H = YE* ,

At the interface, the tangential components of the **E** and **H** fields must be continuous; that is,

When we substitute from equations (**17**) and (**18**) and then from (**7**), the exponential factors again cancel out, so that the interface conditions reduce to

Solving for *r*_{p} and *t*_{p} , we find

and

At *normal incidence* (*? _{i} = ?_{t} =* 0), indicated by an additional subscript 0, these results become

and

At *grazing incidence* (*?*_{i} -> 90°), we again have cos *?*_{i} -> 0 , hence *r*_{p} -> -1 and *t*_{p} -> 0.

Comparing (**23**) and (**24**) with (**15**) and (**16**), we see that at *normal* incidence, under the adopted sign convention, the transmission coefficients for the two polarizations are equal, whereas the reflection coefficients have equal magnitudes but opposite signs. While this clash of signs is a disadvantage of the convention, the attendant advantage is that the signs agree at *grazing* incidence.

The *Poynting vector* for a wave is a vector whose component in any direction is the *irradiance* (power per unit area) of that wave on a surface perpendicular to that direction. For a plane sinusoidal wave the Poynting vector is **E** × **H ^{*}**}, where Re{

From equations (**13**) and (**21**), taking squared magnitudes, we find that the *reflectivity* (ratio of reflected power to incident power) is

for the s polarization, and

for the p polarization. Note that when comparing the powers of two such waves in the same medium and with the same cos *?*, the impedance and geometric factors mentioned above are identical and cancel out. But in computing the power *transmission* (below), these factors must be taken into account.

The simplest way to obtain the power transmission coefficient (*transmissivity*, the ratio of transmitted power to incident power *in the direction normal to the interface*, i.e. the y direction) is to use *R* + *T* = 1 (conservation of energy). In this way we find

for the s polarization, and

for the p polarization.

In the case of an interface between two lossless media (for which ? and ? are *real* and positive), one can obtain these results directly using the squared magnitudes of the amplitude transmission coefficients that we found earlier in equations (**14**) and (**22**). But, for given amplitude (as noted above), the component of the Poynting vector in the y direction is proportional to the geometric factor cos *?* and inversely proportional to the wave impedance Z. Applying these corrections to each wave, we obtain two ratios multiplying the square of the amplitude transmission coefficient:

for the s polarization, and

for the p polarization. The last two equations apply only to lossless dielectrics, and only at incidence angles smaller than the critical angle (beyond which, of course, *T* = 0 ).

From equations (**4**) and (**5**), we see that two dissimilar media will have the same refractive index, but different admittances, if the ratio of their permeabilities is the inverse of the ratio of their permittivities. In that unusual situation we have *?*_{t} = *?*_{i} (that is, the transmitted ray is undeviated), so that the cosines in equations (**13**), (**14**), (**21**), (**22**), and (**25**) to (**28**) cancel out, and all the reflection and transmission ratios become independent of the angle of incidence; in other words, the ratios for normal incidence become applicable to all angles of incidence.^{[35]}. When extended to spherical reflection or scattering, this results in the Kerker effect for Mie_Scattering.

Since the Fresnel equations were developed for optics, they are usually given for non-magnetic materials. Dividing (**4**) by (**5**)) yields

- .

For non-magnetic media we can substitute the vacuum permeability *?*_{0} for *?*, so that

- ;

that is, the admittances are simply proportional to the corresponding refractive indices. When we make these substitutions in equations (**13**) to (**16**) and equations (**21**) to (**26**), the factor *c?*_{0} cancels out. For the amplitude coefficients we obtain:^{[5]}^{[6]}

For the case of normal incidence these reduce to:

The power reflection coefficients become:

The power transmissions can then be found from *T* = 1 - *R*.

For equal permeabilities (e.g., non-magnetic media), if *?*_{i} and *?*_{t} are *complementary*, we can substitute sin *?*_{t} for cos *?*_{i} , and sin *?*_{i} for cos *?*_{t} , so that the numerator in equation (**31**) becomes *n*_{2} sin *?*_{t} - *n*_{1} sin *?*_{i} , which is zero (by Snell's law). Hence *r*_{p} = 0 and only the s-polarized component is reflected. This is what happens at the Brewster angle. Substituting cos *?*_{i} for sin *?*_{t} in Snell's law, we readily obtain

for Brewster's angle.

Although it is not encountered in practice, the equations can also apply to the case of two media with a common permittivity but different refractive indices due to different permeabilities. From equations (**4**) and (**5**), if *?* is fixed instead of *?*, then Y becomes *inversely* proportional to n, with the result that the subscripts 1 and 2 in equations (**29**) to (**38**) are interchanged (due to the additional step of multiplying the numerator and denominator by *n*_{1}*n*_{2}). Hence, in (**29**) and (**31**), the expressions for *r*_{s} and *r*_{p} in terms of refractive indices will be interchanged, so that Brewster's angle (**39**) will give *r*_{s} = 0 instead of *r*_{p} = 0 , and any beam reflected at that angle will be p-polarized instead of s-polarized.^{[36]} Similarly, Fresnel's sine law will apply to the p polarization instead of the s polarization, and his tangent law to the s polarization instead of the p polarization.

This switch of polarizations has an analog in the old mechanical theory of light waves (see *§ History*, above). One could predict reflection coefficients that agreed with observation by supposing (like Fresnel) that different refractive indices were due to different *densities* and that the vibrations were *normal* to what was then called the plane of polarization, or by supposing (like MacCullagh and Neumann) that different refractive indices were due to different *elasticities* and that the vibrations were *parallel* to that plane.^{[37]} Thus the condition of equal permittivities and unequal permeabilities, although not realistic, is of some historical interest.

- Jones calculus
- Polarization mixing
- Index-matching material
- Field and power quantities
- Fresnel rhomb, Fresnel's apparatus to produce circularly polarised light
- Specular reflection
- Schlick's approximation
- Snell's window
- X-ray reflectivity
- Plane of incidence
- Reflections of signals on conducting lines

**^**Some authors use the opposite sign convention for*r*_{p}, so that*r*_{p}is positive when the incoming and reflected magnetic fields are anti-parallel, and negative when they are parallel. This latter convention has the convenient advantage that the s and p sign conventions are the same at normal incidence. However, either convention, when used consistently, gives the right answers.**^**The above form (**1**) is typically used by physicists. Electrical engineers typically prefer the form**E**_{k}*e*^{j(?t-k?r)}; that is, they not only use*j*instead of*i*for the imaginary unit, but also change the sign of the exponent, with the result that the whole expression is replaced by its complex conjugate, leaving the real part unchanged [Cf. (e.g.) Collin, 1966, p. 41, eq. (2.81)]. The electrical engineers' form and the formulas derived therefrom may be converted to the physicists' convention by substituting*-i*for*j*.**^**In the electrical engineering convention, the time-dependent factor is*e*, so that a phase advance corresponds to multiplication by a complex constant with a^{j?t}*positive*argument, and differentiation w.r.t. time corresponds to multiplication by*+j?*. This article, however, uses the physics convention, whose time-dependent factor is*e*. Although the imaginary unit does not appear explicitly in the results given here, the time-dependent factor affects the interpretation of any results that turn out to be complex.^{-i?t}

**^**Born & Wolf, 1970, p. 38.**^**Hecht, 1987, p. 100.**^**Driggers, Ronald G.; Hoffman, Craig; Driggers, Ronald (2011).*Encyclopedia of Optical Engineering*. doi:10.1081/E-EOE. ISBN 978-0-8247-0940-2.**^**Hecht, 1987, p. 102.- ^
^{a}^{b}Lecture notes by Bo Sernelius, main site, see especially Lecture 12. - ^
^{a}^{b}Born & Wolf, 1970, p. 40, eqs. (20), (21). **^**Hecht, 2002, p. 116, eqs. (4.49), (4.50).**^**Hecht, 2002, p. 120, eq. (4.56).**^**Hecht, 2002, p. 120, eq. (4.57).**^**Fresnel, 1866, p. 773.**^**Hecht, 2002, p. 115, eq. (4.42).**^**Fresnel, 1866, p. 757.**^**Hecht, 2002, p. 115, eq. (4.43).**^**E. Verdet, in Fresnel, 1866, p. 789n.**^**Born & Wolf, 1970, p. 40, eqs. (21a).**^**Jenkins & White, 1976, p. 524, eqs. (25a).**^**Whittaker, 1910, p. 134; Darrigol, 2012, p. 213.**^**Heavens, O. S. (1955).*Optical Properties of Thin Films*. Academic Press. chapt. 4.**^**Darrigol, 2012, pp. 191-2.**^**D. Brewster, "On the laws which regulate the polarisation of light by reflexion from transparent bodies",*Philosophical Transactions of the Royal Society*, vol. 105, pp. 125-59, read 16 March 1815.**^**T. Young, "Chromatics" (written Sep.- Oct.*Supplement to the Fourth, Fifth, and Sixth Editions of the Encyclopædia Britannica*, vol. 3 (first half, issued February 1818), pp. 141-63, concluding sentence. 1817),**^**Buchwald, 1989, pp. 390-91; Fresnel, 1866, pp. 646-8.**^**A. Fresnel, "Note sur le calcul des teintes que la polarisation développe dans les lames cristallisées" et seq.,*Annales de Chimie et de Physique*, vol.17, pp.102-11 (May 1821), 167-96 (June 1821), 312-15 ("Postscript", July 1821); reprinted in Fresnel, 1866, pp.609-48; translated as "On the calculation of the hues that polarization develops in crystalline plates (&postscript)", Zenodo: 4058004 / doi:10.5281/zenodo.4058004, 2020.- ^
^{a}^{b}A. Fresnel, "Mémoire sur la loi des modifications que la réflexion imprime à la lumière polarisée" ("Memoir on the law of the modifications that reflection impresses on polarized light"), read 7 January 1823; reprinted in Fresnel, 1866, pp. 767-99 (full text, published 1831), pp. 753-62 (extract, published 1823). See especially pp. 773 (sine law), 757 (tangent law), 760-61 and 792-6 (angles of total internal reflection for given phase differences). **^**Buchwald, 1989, pp. 391-3; Whittaker, 1910, pp. 133-5.**^**Buchwald, 1989, p. 392.**^**Lloyd, 1834, pp. 369-70; Buchwald, 1989, pp. 393-4, 453; Fresnel, 1866, pp. 781-96.**^**Fresnel, 1866, pp. 760-61, 792-6; Whewell, 1857, p. 359.**^**Whittaker, 1910, pp. 177-9.**^**A. Fresnel, "Mémoire sur la double réfraction que les rayons lumineux éprouvent en traversant les aiguilles de cristal de roche suivant les directions parallèles à l'axe" ("Memoir on the double refraction that light rays undergo in traversing the needles of rock crystal [quartz] in directions parallel to the axis"), signed & submitted 9 December 1822; reprinted in Fresnel, 1866, pp. 731-51 (full text, published 1825), pp. 719-29 (extract, published 1823). On the publication dates, see also Buchwald, 1989, p. 462, ref. 1822b.**^**Buchwald, 1989, pp. 230-31; Fresnel, 1866, p. 744.**^**Buchwald, 1989, p. 442; Fresnel, 1866, pp. 737-9, 749. Cf. Whewell, 1857, pp. 356-8; Jenkins & White, 1976, pp. 589-90.**^**Compare M.V. Berry and M.R. Jeffrey, "Conical diffraction: Hamilton's diabolical point at the heart of crystal optics", in E. Wolf (ed.),*Progress in Optics*, vol. 50, Amsterdam: Elsevier, 2007, pp. 13-50, at p. 18, eq. (2.2).**^**This agrees with Born & Wolf, 1970, p. 38, Fig. 1.10.**^**Giles, C.L.; Wild, W.J. (1982). "Fresnel Reflection and Transmission at a Planar Boundary from Media of Equal Refractive Indices".*Applied Physics Letters*.**40**(3): 210-212. doi:10.1063/1.93043.**^**More general Brewster angles, for which the angles of incidence and refraction are not necessarily complementary, are discussed in C.L. Giles and W.J. Wild, "Brewster angles for magnetic media",*International Journal of Infrared and Millimeter Waves*, vol. 6, no. 3 (March 1985), pp. 187-97.**^**Whittaker, 1910, pp. 133, 148-9; Darrigol, 2012, pp. 212, 229-31.

- M. Born and E. Wolf, 1970,
*Principles of Optics*, 4th Ed., Oxford: Pergamon Press. - J.Z. Buchwald, 1989,
*The Rise of the Wave Theory of Light: Optical Theory and Experiment in the Early Nineteenth Century*, University of Chicago Press, ISBN 0-226-07886-8. - R.E. Collin, 1966,
*Foundations for Microwave Engineering*, Tokyo: McGraw-Hill. - O. Darrigol, 2012,
*A History of Optics: From Greek Antiquity to the Nineteenth Century*, Oxford, ISBN 978-0-19-964437-7. - A. Fresnel, 1866 (ed. H. de Senarmont, E. Verdet, and L. Fresnel),
*Oeuvres complètes d'Augustin Fresnel*, Paris: Imprimerie Impériale (3 vols., 1866-70), vol. 1 (1866). - E. Hecht, 1987,
*Optics*, 2nd Ed., Addison Wesley, ISBN 0-201-11609-X. - E. Hecht, 2002,
*Optics*, 4th Ed., Addison Wesley, ISBN 0-321-18878-0. - F.A. Jenkins and H.E. White, 1976,
*Fundamentals of Optics*, 4th Ed., New York: McGraw-Hill, ISBN 0-07-032330-5. - H. Lloyd, 1834, "Report on the progress and present state of physical optics",
*Report of the Fourth Meeting of the British Association for the Advancement of Science*(held at Edinburgh in 1834), London: J. Murray, 1835, pp. 295-413. - W. Whewell, 1857,
*History of the Inductive Sciences: From the Earliest to the Present Time*, 3rd Ed., London: J.W. Parker & Son, vol. 2. - E. T. Whittaker, 1910,
*A History of the Theories of Aether and Electricity: From the Age of Descartes to the Close of the Nineteenth Century*, London: Longmans, Green, & Co.

This further reading section may contain inappropriate or excessive suggestions that may not follow Wikipedia's guidelines. Please ensure that only a reasonable number of balanced, topical, reliable, and notable further reading suggestions are given; removing less relevant or redundant publications with the same point of view where appropriate. Consider utilising appropriate texts as inline sources or creating a separate bibliography article. (October 2014) (Learn how and when to remove this template message) |

- Woan, G. (2010).
*The Cambridge Handbook of Physics Formulas*. Cambridge University Press. ISBN 978-0-521-57507-2. - Griffiths, David J. (2017). "Chapter 9.3: Electromagnetic Waves in Matter".
*Introduction to Electrodynamics*(4th ed.). Cambridge University Press. ISBN 978-1-108-42041-9. - Band, Y. B. (2010).
*Light and Matter: Electromagnetism, Optics, Spectroscopy and Lasers*. John Wiley & Sons. ISBN 978-0-471-89931-0. - Kenyon, I. R. (2008).
*The Light Fantastic - Introduction to Classic and Quantum Optics*. Oxford University Press. ISBN 978-0-19-856646-5. *Encyclopaedia of Physics (2nd Edition)*, R.G. Lerner, G.L. Trigg, VHC publishers, 1991, ISBN (Verlagsgesellschaft) 3-527-26954-1, ISBN (VHC Inc.) 0-89573-752-3*McGraw Hill Encyclopaedia of Physics (2nd Edition)*, C.B. Parker, 1994, ISBN 0-07-051400-3

- Fresnel Equations - Wolfram.
- Fresnel equations calculator
- FreeSnell - Free software computes the optical properties of multilayer materials.
- Thinfilm - Web interface for calculating optical properties of thin films and multilayer materials (reflection & transmission coefficients, ellipsometric parameters Psi & Delta).
- Simple web interface for calculating single-interface reflection and refraction angles and strengths.
- Reflection and transmittance for two dielectrics
^{[permanent dead link]}- Mathematica interactive webpage that shows the relations between index of refraction and reflection. - A self-contained first-principles derivation of the transmission and reflection probabilities from a multilayer with complex indices of refraction.

This article uses material from the Wikipedia page available here. It is released under the Creative Commons Attribution-Share-Alike License 3.0.

Popular Products

Music Scenes

Popular Artists