3D model (JSmol)
|Molar mass||80.91 g·mol-1|
|Appearance||colorless/faint yellow liquid|
|Density||1.49 g/cm3 (48% w/w aq.)|
|Melting point||-11 °C (12 °F; 262 K) (47-49% w/w aq.)|
|Boiling point||122 °C (252 °F; 395 K) at 700 mmHg (47-49% w/w aq.)|
|221 g/100 mL (0 °C) |
204 g/100 mL (15 °C)
130 g/100 mL (100 °C)
|Viscosity||0.84 cP (-75 °C)|
Heat capacity (C)
Std enthalpy of
|Safety data sheet||ICSC 0282|
|R-phrases (outdated)||R34, R37|
|S-phrases (outdated)||(S1/2), S7/9, S26, S45|
|NFPA 704 (fire diamond)|
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|what is ?)(|
Hydrobromic acid is a strong acid formed by dissolving the diatomic molecule hydrogen bromide (HBr) in water. "Constant boiling" hydrobromic acid is an aqueous solution that distills at 124.3 °C and contains 47.6% HBr by mass, which is 8.77 mol/L. Hydrobromic acid has a pKa of -9, making it a stronger acid than hydrochloric acid, but not as strong as hydroiodic acid. Hydrobromic acid is one of the strongest mineral acids known.
Hydrobromic acid is mainly used for the production of inorganic bromides, especially the bromides of zinc, calcium, and sodium. It is a useful reagent for generating organobromine compounds. Certain ethers are cleaved with HBr. It also catalyzes alkylation reactions and the extraction of certain ores. Industrially significant organic compounds prepared from hydrobromic acid include allyl bromide, tetrabromobis(phenol), and bromoacetic acid. HBr almost uniquely participates in antiMarkovnikov hydrohalogenation of alkenes. The resulting 1-bromoalkanes are versatile alkylating agents, giving rise to fatty amines and quaternary ammonium salts.
More typically laboratory preparations involve the production of anhydrous HBr, which is then dissolved in water.
Hydrobromic acid has commonly been prepared industrially by reacting bromine with either sulfur or phosphorus and water. However, it can also be produced electrolytically. It can also be prepared by treating bromides with non-oxidising acids like phosphoric or acetic acids.
Using more concentrated sulfuric acid or allowing the reaction solution to exceed 75 °C further oxidizes HBr to bromine gas. The acid is further purified by filtering out the KHSO4 and by distilling off the water until the solution reaches an azeotrope (? 126 °C at 760 torr). The yield is approximately 85%.
Hydrobromic acid is available commercially in various concentrations and purities.
Media related to Hydrogen bromide at Wikimedia Commons