|Original author(s)||James Yonan|
|Developer(s)||OpenVPN project / OpenVPN Inc.|
|Initial release||13 May 2001|
|Stable release||2.4.7(19 February 2019 )|
|License||GNU General Public License|
OpenVPN is an open-source commercial software that implements virtual private network (VPN) techniques to create secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. It uses a custom security protocol that utilizes SSL/TLS for key exchange. It is capable of traversing network address translators (NATs) and firewalls. It was written by James Yonan and is published under the GNU General Public License (GPL).
OpenVPN allows peers to authenticate each other using pre-shared secret keys, certificates or username/password. When used in a multiclient-server configuration, it allows the server to release an authentication certificate for every client, using signatures and certificate authority. It uses the OpenSSL encryption library extensively, as well as the TLS protocol, and contains many security and control features.
OpenVPN uses the OpenSSL library to provide encryption of both the data and control channels. It lets OpenSSL do all the encryption and authentication work, allowing OpenVPN to use all the ciphers available in the OpenSSL package. It can also use the HMAC packet authentication feature to add an additional layer of security to the connection (referred to as an "HMAC Firewall" by the creator). It can also use hardware acceleration to get better encryption performance. Support for mbed TLS is available starting from version 2.3.
OpenVPN has several ways to authenticate peers with each other. OpenVPN offers pre-shared keys, certificate-based, and username/password-based authentication. Preshared secret key is the easiest, and certificate-based is the most robust and feature-rich. In version 2.0 username/password authentications can be enabled, both with or without certificates. However, to make use of username/password authentications, OpenVPN depends on third-party modules.
From 2.3.x series on, OpenVPN fully supports IPv6 as protocol of the virtual network inside a tunnel and the OpenVPN applications can also establish connections via IPv6. It has the ability to work through most proxy servers (including HTTP) and is good at working through network address translation (NAT) and getting out through firewalls. The server configuration has the ability to "push" certain network configuration options to the clients. These include IP addresses, routing commands, and a few connection options. OpenVPN offers two types of interfaces for networking via the Universal TUN/TAP driver. It can create either a layer-3 based IP tunnel (TUN), or a layer-2 based Ethernet TAP that can carry any type of Ethernet traffic. OpenVPN can optionally use the LZO compression library to compress the data stream. Port 1194 is the official IANA assigned port number for OpenVPN. Newer versions of the program now default to that port. A feature in the 2.0 version allows for one process to manage several simultaneous tunnels, as opposed to the original "one tunnel per process" restriction on the 1.x series.
OpenVPN's use of common network protocols (TCP and UDP) makes it a desirable alternative to IPsec in situations where an ISP may block specific VPN protocols in order to force users to subscribe to a higher-priced, "business grade," service tier.[example needed]
When OpenVPN uses Transmission Control Protocol (TCP) transports to establish a tunnel, performance will be acceptable only as long as there is sufficient excess bandwidth on the un-tunneled network link to guarantee that the tunneled TCP timers do not expire. If this becomes untrue, performance falls off dramatically. This is known as the "TCP meltdown problem".
OpenVPN offers various internal security features. It has up to 256-bit encryption through OpenSSL library, although some service providers may offer lower rates, effectively providing some of the fastest VPN available to consumers. It runs in userspace instead of requiring IP stack (therefore kernel) operation. OpenVPN has the ability to drop root privileges, use mlockall to prevent swapping sensitive data to disk, enter a chroot jail after initialization and apply a SELinux context after initialization.
OpenVPN can be extended with third-party plug-ins or scripts, which can be called at defined entry points. The purpose of this is often to extend OpenVPN with more advanced logging, enhanced authentication with username and passwords, dynamic firewall updates, RADIUS integration and so on. The plug-ins are dynamically loadable modules, usually written in C, while the scripts interface can execute any scripts or binaries available to OpenVPN. In the OpenVPN source code there are some examples of such plug-ins, including a PAM authentication plug-in. Several third-party plug-ins also exist to authenticate against LDAP or SQL databases such as SQLite and MySQL.
It is available on Solaris, Linux, OpenBSD, FreeBSD, NetBSD, QNX, macOS and Windows XP and later. OpenVPN is available for mobile phone operating systems (OS) including Maemo,Windows Mobile 6.5 and below,iOS 3GS+ devices,jailbroken iOS 3.1.2+ devices,Android 4.0+ devices, and Android devices that have had the Cyanogenmod aftermarket firmware flashed or have the correct kernel module installed. It is not compatible with some mobile phone OSes, including Palm OS. It is not a "web-based" VPN shown as a web page such as Citrix or Terminal Services Web access; the program is installed independently and configured by editing text files manually, rather than through a GUI-based wizard. OpenVPN is not compatible with VPN clients that use the IPsec over L2TP or PPTP protocols. The entire package consists of one binary for both client and server connections, an optional configuration file, and one or more key files depending on the authentication method used.
OpenVPN has been integrated into several router firmware packages allowing users to run OpenVPN in client or server mode from their network routers. A router running OpenVPN in client mode, for example, allows any device on a network to access a VPN without needing the capability to install OpenVPN.
Notable firmware packages with OpenVPN integration include:
|OpenWrt||Free||Community driven development|||
|pfSense||Free||Rubicon Communications, LLC (Netgate)|
OpenVPN has been implemented in some manufacturer router firmware, such as the D-Link DSR-250 and some MikroTik Routers. MikroTik's implementation does not support the UDP protocol or LZO compression, which limits transfer speeds attainable. MikroTik said in 2010 that they would not continue developing OpenVPN in favor of Secure Socket Tunneling Protocol (SSTP).
OpenVPN has been integrated into SoftEther VPN, an open-source multi-protocol VPN server, to allow users to connect to the VPN server from existing OpenVPN clients.
OpenVPN is available in two versions: