A regular polyhedron is a polyhedron whose symmetry group acts transitively on its flags. A regular polyhedron is highly symmetrical, being all of edgetransitive, vertextransitive and facetransitive. In classical contexts, many different equivalent definitions are used; a common one is that the faces are congruent regular polygons which are assembled in the same way around each vertex.
A regular polyhedron is identified by its Schläfli symbol of the form {n, m}, where n is the number of sides of each face and m the number of faces meeting at each vertex. There are 5 finite convex regular polyhedra (the Platonic solids), and four regular star polyhedra (the KeplerPoinsot polyhedra), making nine regular polyhedra in all. In addition, there are five regular compounds of the regular polyhedra.
There are five convex regular polyhedra, known as the Platonic solids, four regular star polyhedra, the KeplerPoinsot polyhedra, and five regular compounds of regular polyhedra:
Tetrahedron {3, 3}  Cube {4, 3}  Octahedron {3, 4}  Dodecahedron {5, 3}  Icosahedron {3, 5} 
? = 2  ? = 2  ? = 2  ? = 2  ? = 2 
Small stellated dodecahedron {5/2, 5} 
Great dodecahedron {5, 5/2} 
Great stellated dodecahedron {5/2, 3} 
Great icosahedron {3, 5/2} 
? = 6  ? = 6  ? = 2  ? = 2 
Two tetrahedra 2 {3, 3} 
Five tetrahedra 5 {3, 3} 
Ten tetrahedra 10 {3, 3} 
Five cubes 5 {4, 3} 
Five octahedra 5 {3, 4} 
? = 4  ? = 10 
The property of having a similar arrangement of faces around each vertex can be replaced by any of the following equivalent conditions in the definition:
A regular polyhedron has all of three related spheres (other polyhedra lack at least one kind) which share its centre:
The regular polyhedra are the most symmetrical of all the polyhedra. They lie in just three symmetry groups, which are named after the Platonic solids:
Any shapes with icosahedral or octahedral symmetry will also contain tetrahedral symmetry.
The five Platonic solids have an Euler characteristic of 2. This simply reflects that the surface is a topological 2sphere, and so is also true, for example, of any polyhedron which is starshaped with respect to some interior point.
The sum of the distances from any point in the interior of a regular polyhedron to the sides is independent of the location of the point (this is an extension of Viviani's theorem.) However, the converse does not hold, not even for tetrahedra.^{[2]}
In a dual pair of polyhedra, the vertices of one polyhedron correspond to the faces of the other, and vice versa.
The regular polyhedra show this duality as follows:
The Schläfli symbol of the dual is just the original written backwards, for example the dual of {5, 3} is {3, 5}.
Stones carved in shapes resembling clusters of spheres or knobs have been found in Scotland and may be as much as 4,000 years old. Some of these stones show not only the symmetries of the five Platonic solids, but also some of the relations of duality amongst them (that is, that the centres of the faces of the cube gives the vertices of an octahedron). Examples of these stones are on display in the John Evans room of the Ashmolean Museum at Oxford University. Why these objects were made, or how their creators gained the inspiration for them, is a mystery. There is doubt regarding the mathematical interpretation of these objects, as many have nonplatonic forms, and perhaps only one has been found to be a true icosahedron, as opposed to a reinterpretation of the icosahedron dual, the dodecahedron.^{[3]}
It is also possible that the Etruscans preceded the Greeks in their awareness of at least some of the regular polyhedra, as evidenced by the discovery near Padua (in Northern Italy) in the late 19th century of a dodecahedron made of soapstone, and dating back more than 2,500 years (Lindemann, 1987).
The earliest known written records of the regular convex solids originated from Classical Greece. When these solids were all discovered and by whom is not known, but Theaetetus (an Athenian) was the first to give a mathematical description of all five (Van der Waerden, 1954), (Euclid, book XIII). H.S.M. Coxeter (Coxeter, 1948, Section 1.9) credits Plato (400 BC) with having made models of them, and mentions that one of the earlier Pythagoreans, Timaeus of Locri, used all five in a correspondence between the polyhedra and the nature of the universe as it was then perceived  this correspondence is recorded in Plato's dialogue Timaeus. Euclid's reference to Plato led to their common description as the Platonic solids.
One might characterise the Greek definition as follows:
This definition rules out, for example, the square pyramid (since although all the faces are regular, the square base is not congruent to the triangular sides), or the shape formed by joining two tetrahedra together (since although all faces of that triangular bipyramid would be equilateral triangles, that is, congruent and regular, some vertices have 3 triangles and others have 4).
This concept of a regular polyhedron would remain unchallenged for almost 2000 years.
Regular star polygons such as the pentagram (star pentagon) were also known to the ancient Greeks  the pentagram was used by the Pythagoreans as their secret sign, but they did not use them to construct polyhedra. It was not until the early 17th century that Johannes Kepler realised that pentagrams could be used as the faces of regular star polyhedra. Some of these star polyhedra may have been discovered by others before Kepler's time, but Kepler was the first to recognise that they could be considered "regular" if one removed the restriction that regular polyhedra be convex. Two hundred years later Louis Poinsot also allowed star vertex figures (circuits around each corner), enabling him to discover two new regular star polyhedra along with rediscovering Kepler's. These four are the only regular star polyhedra, and have come to be known as the KeplerPoinsot polyhedra. It was not until the mid19th century, several decades after Poinsot published, that Cayley gave them their modern English names: (Kepler's) small stellated dodecahedron and great stellated dodecahedron, and (Poinsot's) great icosahedron and great dodecahedron.
The KeplerPoinsot polyhedra may be constructed from the Platonic solids by a process called stellation. The reciprocal process to stellation is called facetting (or faceting). Every stellation of one polyhedron is dual, or reciprocal, to some facetting of the dual polyhedron. The regular star polyhedra can also be obtained by facetting the Platonic solids. This was first done by Bertrand around the same time that Cayley named them.
By the end of the 19th century there were therefore nine regular polyhedra  five convex and four star.
Each of the Platonic solids occurs naturally in one form or another.
The tetrahedron, cube, and octahedron all occur as crystals. These by no means exhaust the numbers of possible forms of crystals (Smith, 1982, p212), of which there are 48. Neither the regular icosahedron nor the regular dodecahedron are amongst them, but crystals can have the shape of a pyritohedron, which is visually almost indistinguishable from a regular dodecahedron. Truly icosahedral crystals may be formed by quasicrystalline materials which are very rare in nature but can be produced in a laboratory..
A more recent discovery is of a series of new types of carbon molecule, known as the fullerenes (see Curl, 1991). Although C_{60}, the most easily produced fullerene, looks more or less spherical, some of the larger varieties (such as C_{240}, C_{480} and C_{960}) are hypothesised to take on the form of slightly rounded icosahedra, a few nanometres across.
Polyhedra appear in biology as well. In the early 20th century, Ernst Haeckel described a number of species of Radiolaria, some of whose skeletons are shaped like various regular polyhedra (Haeckel, 1904). Examples include Circoporus octahedrus, Circogonia icosahedra, Lithocubus geometricus and Circorrhegma dodecahedra; the shapes of these creatures are indicated by their names. The outer protein shells of many viruses form regular polyhedra. For example, HIV is enclosed in a regular icosahedron.
In ancient times the Pythagoreans believed that there was a harmony between the regular polyhedra and the orbits of the planets. In the 17th century, Johannes Kepler studied data on planetary motion compiled by Tycho Brahe and for a decade tried to establish the Pythagorean ideal by finding a match between the sizes of the polyhedra and the sizes of the planets' orbits. His search failed in its original objective, but out of this research came Kepler's discoveries of the Kepler solids as regular polytopes, the realisation that the orbits of planets are not circles, and the laws of planetary motion for which he is now famous. In Kepler's time only five planets (excluding the earth) were known, nicely matching the number of Platonic solids. Kepler's work, and the discovery since that time of Uranus and Neptune, have invalidated the Pythagorean idea.
Around the same time as the Pythagoreans, Plato described a theory of matter in which the five elements (earth, air, fire, water and spirit) each comprised tiny copies of one of the five regular solids. Matter was built up from a mixture of these polyhedra, with each substance having different proportions in the mix. Two thousand years later Dalton's atomic theory would show this idea to be along the right lines, though not related directly to the regular solids.
The 20th century saw a succession of generalisations of the idea of a regular polyhedron, leading to several new classes.
In the first decades, Coxeter and Petrie allowed "saddle" vertices with alternating ridges and valleys, enabling them to construct three infinite folded surfaces which they called regular skew polyhedra.^{[4]} Coxeter offered a modified Schläfli symbol {l,mn} for these figures, with {l,m} implying the vertex figure, with m regular lgons around a vertex. The n defines ngonal holes. Their vertex figures are regular skew polygons, vertices zigzagging between two planes.
Finite regular skew polyhedra exist in 4space. These finite regular skew polyhedra in 4space can be seen as a subset of the faces of uniform 4polytopes. They have planar regular polygon faces, but regular skew polygon vertex figures.
Two dual solutions are related to the 5cell, two dual solutions are related to the 24cell, and an infinite set of selfdual duoprisms generate regular skew polyhedra as {4, 4  n}. In the infinite limit these approach a duocylinder and look like a torus in their stereographic projections into 3space.
Orthogonal Coxeter plane projections  Stereographic projection  

A_{4}  F_{4}  
{4, 6  3}  {6, 4  3}  {4, 8  3}  {8, 4  3}  {4, 4  n} 
30 {4} faces 60 edge 20 vertices 
20 {6} faces 60 edges 30 vertices 
288 {4} faces 576 edges 144 vertices 
144 {8} faces 576 edges 288 vertices 
n^{2} {4} faces 2n^{2} edges n^{2} vertices 
Studies of nonEuclidean (hyperbolic and elliptic) and other spaces such as complex spaces, discovered over the preceding century, led to the discovery of more new polyhedra such as complex polyhedra which could only take regular geometric form in those spaces.
In H^{3}hyperbolic space, paracompact regular honeycombs have Euclidean tiling facets and vertex figures that act like finite polyhedra. Such tilings have an angle defect that can be closed by bending one way or the other. If the tiling is properly scaled, it will close as an asymptopic limit at a single ideal point. These Euclidean tilings are inscribed in a horosphere just as polyhedra are inscribed in a sphere (which contains zero ideal points). The sequence extends when hyperbolic tilings are themselves used as facets of noncompact hyperbolic tessellations, as in the heptagonal tiling honeycomb {7,3,3}; they are inscribed in an equidistant surface (a 2hypercycle), which has two ideal points.
Another group of regular polyhedra comprise tilings of the real projective plane. These include the hemicube, hemioctahedron, hemidodecahedron, and hemiicosahedron. They are (globally) projective polyhedra, and are the projective counterparts of the Platonic solids. The tetrahedron does not have a projective counterpart as it does not have pairs of parallel faces which can be identified, as the other four Platonic solids do.
Hemicube {4,3} 
Hemioctahedron {3,4} 
Hemidodecahedron {3,5} 
Hemiicosahedron {5,3} 
These occur as dual pairs in the same way as the original Platonic solids do. Their Euler characteristics are all 1.
By now, polyhedra were firmly understood as threedimensional examples of more general polytopes in any number of dimensions. The second half of the century saw the development of abstract algebraic ideas such as Polyhedral combinatorics, culminating in the idea of an abstract polytope as a partially ordered set (poset) of elements. The elements of an abstract polyhedron are its body (the maximal element), its faces, edges, vertices and the null polytope or empty set. These abstract elements can be mapped into ordinary space or realised as geometrical figures. Some abstract polyhedra have wellformed or faithful realisations, others do not. A flag is a connected set of elements of each dimension  for a polyhedron that is the body, a face, an edge of the face, a vertex of the edge, and the null polytope. An abstract polytope is said to be regular if its combinatorial symmetries are transitive on its flags  that is to say, that any flag can be mapped onto any other under a symmetry of the polyhedron. Abstract regular polytopes remain an active area of research.
Five such regular abstract polyhedra, which can not be realised faithfully, were identified by H. S. M. Coxeter in his book Regular Polytopes (1977) and again by J. M. Wills in his paper "The combinatorially regular polyhedra of index 2" (1987). All five have C_{2}×S_{5} symmetry but can only be realised with half the symmetry, that is C_{2}×A_{5} or icosahedral symmetry.^{[5]}^{[6]}^{[7]} They are all topologically equivalent to toroids. Their construction, by arranging n faces around each vertex, can be repeated indefinitely as tilings of the hyperbolic plane. In the diagrams below, the hyperbolic tiling images have colors corresponding to those of the polyhedra images.
Polyhedron  Medial rhombic triacontahedron 
Dodecadodecahedron 
Medial triambic icosahedron 
Ditrigonal dodecadodecahedron 
Excavated dodecahedron 

Type  Dual {5,4}_{6}  {5,4}_{6}  Dual of {5,6}_{4}  {5,6}_{4}  {6,6}_{6} 
(v,e,f)  (24,60,30)  (30,60,24)  (24,60,20)  (20,60,24)  (20,60,20) 
Vertex figure  {5}, {5/2} 
(5.5/2)^{2} 
{5}, {5/2} 
(5.5/3)^{3} 

Faces  30 rhombi 
12 pentagons 12 pentagrams 
20 hexagons 
12 pentagons 12 pentagrams 
20 hexagrams 
Tiling  {4, 5} 
{5, 4} 
{6, 5} 
{5, 6} 
{6, 6} 
?  6  6  16  16  20 
The Petrie dual of a regular polyhedron is a regular map whose vertices and edges correspond to the vertices and edges of the original polyhedron, and whose faces are the set of skew Petrie polygons.^{[8]}
Name  Petrial tetrahedron 
Petrial cube  Petrial octahedron  Petrial dodecahedron  Petrial icosahedron 

Symbol  {3,3}^{?}  {4,3}^{?}  {3,4}^{?}  {5,3}^{?}  {3,5}^{?} 
(v,e,f), χ  (4,6,3), χ = 1  (8,12,4), χ = 0  (6,12,4), χ = 2  (20,30,6), χ = 4  (12,30,6), χ = 12 
Faces  3 skew squares 
4 skew hexagons  6 skew decagons  
Image  
Animation  
Related figures 
{4,3}_{3} = {4,3}/2 = {4,3}_{(2,0)} 
{6,3}_{3} = {6,3}_{(2,0)} 
{6,4}_{3} = {6,4}_{(4,0)} 
{10,3}_{5}  {10,5}_{3} 
The usual nine regular polyhedra can also be represented as spherical tilings (tilings of the sphere):
Tetrahedron {3,3} 
Cube {4,3} 
Octahedron {3,4} 
Dodecahedron {5,3} 
Icosahedron {3,5} 
Small stellated dodecahedron {5/2,5} 
Great dodecahedron {5,5/2} 
Great stellated dodecahedron {5/2,3} 
Great icosahedron {3,5/2} 
For a regular polyhedron whose Schläfli symbol is {m, n}, the number of polygonal faces may be found by:
The Platonic solids known to antiquity are the only integer solutions for m >= 3 and n >= 3. The restriction m >= 3 enforces that the polygonal faces must have at least three sides.
When considering polyhedra as a spherical tiling, this restriction may be relaxed, since digons (2gons) can be represented as spherical lunes, having nonzero area. Allowing m = 2 admits a new infinite class of regular polyhedra, which are the hosohedra. On a spherical surface, the regular polyhedron {2, n} is represented as n abutting lunes, with interior angles of 2?/n. All these lunes share two common vertices.^{[9]}
A regular dihedron, {n, 2}^{[9]} (2hedron) in threedimensional Euclidean space can be considered a degenerate prism consisting of two (planar) nsided polygons connected "backtoback", so that the resulting object has no depth, analogously to how a digon can be constructed with two line segments. However, as a spherical tiling, a dihedron can exist as nondegenerate form, with two nsided faces covering the sphere, each face being a hemisphere, and vertices around a great circle. It is regular if the vertices are equally spaced.
Digonal dihedron {2,2} 
Trigonal dihedron {3,2} 
Square dihedron {4,2} 
Pentagonal dihedron {5,2} 
Hexagonal dihedron {6,2} 
...  {n,2} 
Digonal hosohedron {2,2} 
Trigonal hosohedron {2,3} 
Square hosohedron {2,4} 
Pentagonal hosohedron {2,5} 
Hexagonal hosohedron {2,6} 
...  {2,n} 
The hosohedron {2,n} is dual to the dihedron {n,2}. Note that when n = 2, we obtain the polyhedron {2,2}, which is both a hosohedron and a dihedron. All of these have Euler characteristic 2.