3D model (JSmol)
CompTox Dashboard (EPA)
|Molar mass||65.0099 g/mol|
|Appearance||colorless to white solid|
|Density||1.846 g/cm3 (20 °C)|
|Melting point||275 °C (527 °F; 548 K) violent decomposition|
|38.9 g/100 mL (0 °C) |
40.8 g/100 mL (20 °C)
55.3 g/100 mL (100 °C)
|Solubility||very soluble in ammonia |
(clarification needed, says highly soluble in water above) slightly soluble in benzene
insoluble in ether, acetone, hexane, chloroform
|Solubility in methanol||2.48 g/100 mL (25 °C)|
|Solubility in ethanol||0.22 g/100 mL (0 °C)|
|R-3m, No. 166|
Heat capacity (C)
|76.6 J/mol K|
|70.5 J/mol K|
Std enthalpy of
Gibbs free energy (ΔfG?)
|Safety data sheet||ICSC 0950|
|GHS Signal word||Danger|
|H300, H310, H400, H410|
|P260, P280, P301+310, P501 |
|NFPA 704 (fire diamond)|
|Flash point||300 °C (572 °F; 573 K)|
|Lethal dose or concentration (LD, LC):|
LD50 (median dose)
|27 mg/kg (oral, rats/mice)|
|NIOSH (US health exposure limits):|
|C 0.1 ppm (as HN3) [skin] C 0.3 mg/m3 (as NaN3) [skin]|
IDLH (Immediate danger)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|what is ?)(|
Sodium azide is the inorganic compound with the formula NaN?. This colorless salt is the gas-forming component in many car airbag systems. It is used for the preparation of other azide compounds. It is an ionic substance, is highly soluble in water, and is very acutely toxic.
Sodium azide is an ionic solid. Two crystalline forms are known, rhombohedral and hexagonal. Both adopt layered structures. The azide anion is very similar in each form, being centrosymmetric with N-N distances of 1.18 Å. The ion has octahedral geometry. Each azide is linked to six Na+ centers, with three Na-N bonds to each terminal nitrogen center.
The sodium amide is subsequently combined with nitrous oxide:
Curtius and Thiele developed another production process, where a nitrite ester is converted to sodium azide using hydrazine. This method is suited for laboratory preparation of sodium azide:
Treatment of sodium azide with strong acids gives hydrazoic acid, which is also extremely toxic:
Aqueous solutions contain minute amounts of hydrogen azide, the formation of which is described by the following equilibrium:
Older airbag formulations contained mixtures of oxidizers and sodium azide and other agents including ignitors and accelerants. An electronic controller detonates this mixture during an automobile crash:
The same reaction occurs upon heating the salt to approximately 300 °C. The sodium that is formed is a potential hazard alone and, in automobile airbags, it is converted by reaction with other ingredients, such as potassium nitrate and silica. In the latter case, innocuous sodium silicates are generated. Sodium azide is also used in airplane escape chutes. Newer-generation air bags contain nitroguanidine or similar less sensitive explosives.
Due to its explosion hazard, sodium azide is of only limited value in industrial-scale organic chemistry. In the laboratory, it is used in organic synthesis to introduce the azide functional group by displacement of halides. The azide functional group can thereafter be converted to an amine by reduction with either SnCl2 in ethanol or lithium aluminium hydride or a tertiary phosphine, such as triphenylphosphine in the Staudinger reaction, with Raney nickel or with hydrogen sulfide in pyridine.
In hospitals and laboratories, it is a biocide; it is especially important in bulk reagents and stock solutions which may otherwise support bacterial growth where the sodium azide acts as a bacteriostatic by inhibiting cytochrome oxidase in gram-negative bacteria; however, some gram-positive bacteria (streptococci, pneumococci, lactobacilli) are intrinsically resistant.
Sodium azide has caused deaths for decades. It is a severe poison. It possesses the NFPA 704's highest rating of 4 on the health scale. It may be fatal in contact with skin or if swallowed. Even minute amounts can cause symptoms. The toxicity of this compound is comparable to that of soluble alkali cyanides. No toxicity has been reported from spent airbags.
It produces extrapyramidal symptoms with necrosis of the cerebral cortex, cerebellum, and basal ganglia. Toxicity may also include hypotension,blindness and hepatic necrosis. Sodium azide increases cyclic GMP levels in brain and liver by activation of guanylate cyclase.
Sodium azide solutions will react with metals to form metal azides, which can be shock sensitive and explosive. This should be considered when choosing a container for sodium azide solutions. This can also create a dangerous situation when azide solutions are disposed down the drain into the sanitary sewer system. Metal in the plumbing system will react, forming highly sensitive metal azide crystals which can accumulate over many years. 
Salts and covalent derivatives of the azide ion