Talk:Tonnage
Get Talk:Tonnage essential facts below. View Videos or join the Talk:Tonnage discussion. Add Talk:Tonnage to your PopFlock.com topic list for future reference or share this resource on social media.
Talk:Tonnage

## Question

Why is the term "tonnage" used to describe the capacity of refrigeration units, such as chillers used for comfort cooling in commercial buildings, etc.? Please advise. --Preceding unsigned comment added by 66.125.193.172 (talk) 21:09, 8 April 2008 (UTC)

If you go to Wiki refrigeration under the subheading Unit of refrigeration, you will find the following: Domestic and commercial refrigerators may be rated in kJ/s, or Btu/h of cooling. Commercial refrigerators in North America are mostly rated in tons of refrigeration, but elsewhere in kW. One ton of refrigeration capacity can freeze one short ton of water at 0 °C (32 °F) in 24 hours. Based on that: A much less common definition is: 1 tonne of refrigeration is the rate of heat removal required to freeze a metric ton (i.e., 1000 kg) of water at 0 °C in 24 hours. Based on the heat of fusion being 333.55 kJ/kg, 1 tonne of refrigeration = 13,898 kJ/h = 3.861 kW. As can be seen, 1 tonne of refrigeration is 10% larger than 1 ton of refrigeration.Tvbanfield (talk) 16:42, 29 April 2010 (UTC)

A long ton measures weight. Its value is 2,240 pounds. (The common ton in use in the Imperial and U.S. systems of measurements is the short ton of 2,000 pounds.)

I don't know where the 'Imperial' in the bracketed part of the above came from but the reverse is true - the short ton is almost never used in the UK, 'ton' (and 'Imperial ton') almost always meaning the 'long' ton of 2,240lb.

A measurement ton measures space. Its value is 100 cubic feet.

This is the Registered Ton as used in shipping, which is why ocean liners like the Titanic and the two Queens used to be measured in Gross registered tonnage (GRT), which has nothing to do with the weight of the ship (displacement) but is the amount of space the ship has for carrying cargo, in units of 100 cubic feet. The 'registered' part of the name comes from the amount of cargo space the ship was registered at Lloyds to safely use.

Warships are measured in displacement tonnage, which is why a liner like the Queen Mary appeared to weigh more than most battleships, which of course wasn't true, as what was being measured in the liner was space not weight. :) --Preceding unsigned comment added by 82.111.113.204 (talk o contribs)

Actually RMS Queen Mary did displace nearly 80,000 tons (and also measured about 81,000 tons gross). And she therefore was heavier than the Yamato class battleships, the heaviest ever built. But the point is correct; displacement and gross tonnage measure two different things. And in recent years shallow draft cruise ships with large superstructures boast enormous gross tonnages on relatively modest displacements. Kablammo 03:35, 19 May 2006 (UTC)

## Definitions of "ton"

I've removed the following material, because for now I can't see how it fits in (the article certainly doesn't explain):

• A measurement ton measures space. Its value is 100 cubic feet (2.832 cubic meters).
• A freight ton also measures space. Its value is 40 cubic feet (1.133 cubic meter).
• A long ton measures weight. Its value is 2,240 pounds (1,016.05 kg). (This is the common ton in use in Imperial measurements; the ton of the U.S. system of measurements is the short ton of 2,000 pounds (907.18 kg).)
• A metric ton (commonly written tonne and abbreviated t) equals 1,000 kilograms.

How should this be re-introduced (if at all)? For example, I think "measurement ton" belongs under gross/net tonnage, because one ton = 100 cubic feet in those systems (as far as I know). So where does "freight ton" come in? I think the definitions of "long ton" and "tonne" should simply be left to the long ton and tonne articles.

As for the paragraph "Gross Tonnage ... is often expressed in gross tons, measurement tons, or cubic meters." Quite apart from being absurdly circular, isn't this just totally wrong? Isn't one gross ton equal to 100 cu ft? -- Johantheghost 19:27, 1 January 2006 (UTC)

I've found some references, and had a go at re-doing all the above. I think freight ton belongs in ton. -- Johantheghost 21:03, 1 January 2006 (UTC)

## More on Tonnage

Tonnage in the modern sense is solely a measure of volume. Weight measures (such as displacement) are no longer referred to as 'tonnage'. (See Society of Naval Architects and Marine Engineers text books). What is required is a definition of Lightship, Deadweight and Displacement. Once I figure out how to do that I will add definitions. Currently Lightship refers you to the wrong definition - that is a ship with a navigation light on it). The weight terms lightship and deadweight are sub-parts of displacement. Lightship is the weight of the ship and deadweight is the weight of everything it carries (ex: fuel, cargo, crew, provisions, etc.).

I rather like the idea of Wiki and hope it gets used in a constructive manner. What is required is a greater effort to reference accepted text of specific subjects to ensure popflock.com resource is collecting facts and not just a lot of opinions. Jmvolc 00:51, 10 May 2006 (UTC)

Hi, a couple of points:
• "Tonnage in the modern sense is solely a measure of volume": how many times in how many different contexts have I seen the term "displacement tonnage"? I can't even count them. The Society of Naval Architects and Marine Engineers may well have its own definition of "tonnage", but even that society can't be considered definitive if the term "tonnage" is very widely used in a different way. popflock.com resource has to reflect how the world uses a word, not just one society, however learned.
• When you deleted displacement, did you click on "what links here" (on the left) to check the articles that reference this one? I have a feeling that a number of other articles use this one to provide a definition of displacement.
• So, at the very least, I believe that the tonnage article should mention displacement. Not because it's necessarily "correct", but because this is where people will come looking for it. There are two ways we can do this:
1. By creating an article for "displacement", and linking to it from here. See Golden Globe, and how the article refers to the movie awards, but provides a redirect to the yacht race. If we do this, we need to check every reference to tonnage to see if it needs to be redirected.
2. By including displacement here, noting that this is not a strictly correct usage of "tonnage".
I prefer the latter course, at least for now, because they really are very closely related at least. I don't think "displacement" (or "deadweight" for that matter) are large enough subjects to justify their own articles. And it's noted under "Origins" that they have common origins.
So, I've done (2) for now. All comments welcome.
Other points:
• The way to handle "lightship" is to put a note at the start of the lightship article pointing to the article that discusses the ship weight -- currently this article. I've done this.
• Your point about "reference accepted text of specific subjects" is absolutely right, and that's why it's a cornerstone of popflock.com resource policy -- see popflock.com Resource: Verifiability. So, if you could add references for the informaton you added, that would be great.
Cheers, -- Johan the Ghost seance 11:49, 10 May 2006 (UTC)

Here is a source for various definitions, including gross tonnage, displacement, and block coefficient (used for determining displacement): http://www.foreship.com/pdf/naterms.pdf (deadlink, but now archived here). Would this be helpful? Kablammo 03:43, 19 May 2006 (UTC)

## I think we're getting there !

A few points of clarification (I hope) ...

• I am very new to this media so please excuse my first coarse attempts at contribution
• Tonnage is not a term used exclusively in the marine industry but that is all that is described here ... is there some way of pointing out that other industries use this term as well?
• In the marine context, using 'tonnage' in reference to any weight or mass item is incorrect and should be noted as such. Would it not make more sense to move the section discussing the weight terms to their own entry and refer to them from here?
• I am still too much of a neophyte to appropriate references but hopefull Johantheghost can help

Jmvolc 01:28, 16 May 2006 (UTC)

OK, to respond:
• No apologies are required for any genuine contributions, coarse or otherwise! The whole nature of any Wiki, and popflock.com resource in particular, is that it's better to have people slam in changes so that other people can tidy them up, than to spend forever agonising over what is "right".
• Non-marine uses of "tonnage": I'm not aware of any such uses, so maybe the way to start is to write a sentence or two about them, either here or in the article, and we can discuss the best way to handle them. Probably at first the way is to split this article into sections like "Maritime", "Dental", whatever... if the sections get huge, then they can be split into articles.
• Displacement as "tonnage": the term tonnage is so frequently used to refer to weight that I really believe that this article needs to mention it. Given that "tonnage" originally did mean weight ("the eventual decision to assess dues based on a ship's deadweight..."), I think there's ample reason to include displacement in this article. We just need to note that in modern usage, "tonnage" is strictly volumetric, and I think we've about got that covered. An article on "displacement" would be too small to be worthwhile, I think.
• References: if you provide references in whatever format you like, I'll be happy to tidy them up. Just stick the publication info and page numbers in the text, or whatever.
Cheers, -- Johan the Ghost seance 15:13, 16 May 2006 (UTC)

## Displacement Tonnage Calculation Error

I believe there is a math error in the article below: In the last sentence of the second paragraph; dividing by 64 results in a very small number. Multiplying seems to result in a more reasonable answer. (Dividing by 35 to get long tons seems right) 70.137.56.237 03:00, 18 May 2006 (UTC)Bobthenewbie.

Weight measurements While not "tonnage" in the proper sense, the following methods of ship measurement are often incorrectly referred to as such:

Displacement is the actual total weight of the vessel. It is often expressed in long tons or in metric tons, and is calculated simply by multiplying the volume of the hull below the waterline (ie. the volume of water it is displacing) by the density of the water. (Note that the density will depend on whether the vessel is in fresh or salt water, or is in the tropics, where water is warmer and hence less dense.) For example, in sea water, first determine the volume of the submerged portion of the hull as follows: Multiply its length by its breadth and the draft, all in feet. Then multiply the product thereby obtained by the block coefficient of the hull to get the hull volume in cubic feet. Then divide this figure by 64 (the weight of one cubic foot of seawater) to get the weight of the ship in pounds; or divide by 35 to calculate the weight in long tons.

Sorry ... its :

W = rho g V where:

W = weight or displacement
rho = density
g = gravity
V = volume

So .. with 64 lb/ft3 and 35.0 ft3/L.Ton for Sea Water ...

This means that if V is in ft3, displacement (W) is:

W(in long tons) = V / 35.0

W(in pounds) = V x 64

I have changed the article appropriately.

Thanks, Jmvolc 01:48, 19 May 2006 (UTC)

Excellent, it's looking good! -- Johan the Ghost seance 14:19, 19 May 2006 (UTC)

## Merger proposal

It seems to me that Measures of ship displacement is covering substantially the same information, and should be merged into this page. Feelings? 18:45, 11 March 2008 (UTC)

There is enough confusion as it is with the use of "Tonnage" and "Displacement". I think merging that article with this one would only further the disorientation. I work in the marine industry and have never had anyone use the term "tonnage" in relation to displacement. My position is that not only should the "Measures of Displacement" article not be merged, but edited to remove the terms "Lightship Tonnage", "Lightship Tonnage", etc. as well. SolberggTalk 13:23, 27 March 2008 (EST)

As a bloke with hardly a clue as to this terminology I'd have to second Solbergg. It is confusing. Merging these articles would likely increase the confusion. In fact, deleting Weight measurements would probably be a good idea, leave a link stating clearly that this is not what tonnage is. The article could use a thorough tidy up. I would but I can't make head or tail out of it. JIMp talk·cont 07:07, 2 June 2008 (UTC)

## some questions etc.

No mention seems to have been made of "old measurement" and "new measurement" which were used to describe ships in the 19th century (perhaps just in Britain?). I agree that there has been a ridiculous number of different systems in use over the centuries!

When a book lists "registered tonnage" I assume it means gross, not net?

Some mention perhaps needs to be made of exactly which dimensions were used for which tonnage measurements.

Also, in military use, there was nominal displacement, standard displacement etc. which were designed, in one case, to hide the amount of water torpedo protection used by British ships, and so excluded internal water. These are perhaps interesting historically but I've not enough information to do them myself.

SpookyMulder (talk) 20:54, 13 July 2008 (UTC)

## Stores

There has been confusion about this term in the article, with at least two incorrect wikilinks. With regard to ships, "stores" are consumable materials on board, except fuel, that have to do with the operation of the ship. Stores include drinking water, food, maintenance materials, repair parts, etc. popflock.com resource doesn't seem to have an article that describes this, so the links have been bad. Lou Sander (talk) 10:57, 9 September 2009 (UTC)

## Coefficients K1, K2, K3

These coefficents used in calculation of GT and NT will be calculated using the formula specified in the convention and will have some value, for eg: K1 will be between 0.22 to 0.32 depending on ship's size.

Could you advise, what does these coefficents actually mean? What exactly does it mean, when the factor say, K1 is multiplied to total volume to get GT?

## Confusing terms

Tonnage is a measure of volume Engineers should try to use better names for their definitions, instead of introducing confusing terms. Displacement is a maeasure of weight Pioneers in these areas had no idea of what they were talking about...You should try to emulate mathematical definitions, which are a lot more descriptive (what the word seems to be, is what it actually means).--190.188.3.11 (talk) 14:10, 7 August 2010 (UTC)

OTOH maybe you should try to get a better grip on a subject, instead of pontificating about it.
Tonnage has always been a measure of volume; and displacement has always been a way of determining mass (since Archimedes anyway); so maybe it's you that has no idea what they are talking about.
You should try reading a bit more broadly ( a dictionary, perhaps).
And "in mathematics what a word seems to be is what it actually is"? You're trolling, yes? Moonraker12 (talk) 11:39, 10 August 2010 (UTC)
Yeah, he is. Using "mathematics" when writing about physics is a first sign. Also, all these words used in shipping are older than every mathematical word he has learned only this month. Let's hope he doesn't enter engineering. -DePiep (talk) 12:50, 10 August 2010 (UTC)
The 'ton' comes from this one: Tun - it was a unit of measurement of liquids such as wine and beer, which were widely transported by ship in these casks during the Middle Ages and later. The weight of a full 252 gallon tun (one filled with liquid) later gave its name to the unit of weight, the long ton. The weight of a full tun varied with what liquid was used, due to different liquids having different specific gravities, and so IIRC this 'ton' was later standardised to be the weight of a tun filled with freshwater, but I may be wrong on that.
Later the 'ton' came also to refer to the space taken up by the 252 gallon tun in the ship's hold, so it effectively became a measure of volume/area available for carrying other types of cargo within the ship. This later became the Register ton, based on the internal volume of the hold and of any useful deckspace, measured in multiples of 100 cubic feet.
And THAT is why a 'ton' can either be a weight, or a volume! -- Preceding unsigned comment added by 80.7.147.13 (talk) 14:26, 9 November 2012 (UTC)

## External links modified (January 2018)

Hello fellow Wikipedians,

I have just modified one external link on Tonnage. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

As of February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template `{{sourcecheck}}` (last update: 15 July 2018).

• If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
• If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.--InternetArchiveBot 05:38, 22 January 2018 (UTC)