Tarmacadam is a road surfacing material made by combining macadam surfaces, tar, and sand, patented by Welsh inventor Edgar Purnell Hooley in 1902. The terms "tarmacadam" and tarmac are also used for a variety of other materials, including tar-grouted macadam, bituminous surface treatments, and modern asphalt concrete. The term is also often colloquially used to describe airport aprons (also referred to as "ramps"), taxiways, and runways regardless of the surface.
Pioneered by Scottish engineer John Loudon McAdam in the 1820s, macadam roads are prone to rutting and generating dust. Methods to stabilize macadam surfaces with tar date back to at least 1834 when John Henry Cassell, operating from Cassell's Patent Lava Stone Works in Millwall, patented "lava stone". This method involved spreading tar on the subgrade, placing a typical macadam layer, and finally sealing the macadam with a mixture of tar and sand. Tar-grouted macadam was in use well before 1900, and involved scarifying the surface of an existing macadam pavement, spreading tar, and re-compacting. Although the use of tar in road construction was known in the 19th century, it was little used and was not introduced on a large scale until the motorcar arrived on the scene in the early 20th century.
In 1901, Edgar Purnell Hooley was walking in Denby, Derbyshire, when he noticed a smooth stretch of road close to an ironworks. He was informed that a barrel of tar had fallen onto the road, and someone poured waste slag from the nearby furnaces to cover up the mess. Hooley noticed this unintentional resurfacing had solidified the road, and there was no rutting and no dust. Hooley's 1902 patent for tarmac involved mechanically mixing tar and aggregate before lay-down, and then compacting the mixture with a steamroller. The tar was modified by adding small amounts of Portland cement, resin, and pitch.Nottingham's Radcliffe Road became the first tarmac road in the world.
As petroleum production increased, the by-product bitumen became available in greater quantities and largely supplanted coal tar. The Macadam construction process quickly became obsolete because of its onerous and impractical manual labour requirement; however, the somewhat similar tar and chip method, also known as (bituminous) surface treatment (BST) or "chip-seal", remains popular.
While the specific tarmac pavement is not common in some countries today, many people use the word to refer to generic paved areas at airports, especially the apron near airport terminals, although these areas are often made of concrete. Similarly in the UK, the word tarmac is much more commonly used by the public when referring to asphalt concrete.