Marble is a metamorphic rock composed of recrystallized carbonate minerals, most commonly calcite or dolomite. Marble is typically not foliated, although there are exceptions. In geology, the term "marble" refers to metamorphosed limestone, but its use in stonemasonry more broadly encompasses unmetamorphosed limestone. Marble is commonly used for sculpture and as a building material.
The word "marble" derives from the Ancient Greek (mármaron), from (mármaros), "crystalline rock, shining stone", perhaps from the verb (marmaír?), "to flash, sparkle, gleam";R. S. P. Beekes has suggested that a "Pre-Greek origin is probable".
This stem is also the ancestor of the English word "marmoreal", meaning "marble-like." While the English term "marble" resembles the French marbre, most other European languages (with words like "marmoreal") more closely resemble the original Ancient Greek.
Marble is a rock resulting from metamorphism of sedimentary carbonate rocks, most commonly limestone or dolomite rock. Metamorphism causes variable recrystallization of the original carbonate mineral grains. The resulting marble rock is typically composed of an interlocking mosaic of carbonate crystals. Primary sedimentary textures and structures of the original carbonate rock (protolith) have typically been modified or destroyed.
Pure white marble is the result of metamorphism of a very pure (silicate-poor) limestone or dolomite protolith. The characteristic swirls and veins of many colored marble varieties are usually due to various mineral impurities such as clay, silt, sand, iron oxides, or chert which were originally present as grains or layers in the limestone. Green coloration is often due to serpentine resulting from originally magnesium-rich limestone or dolomite with silica impurities. These various impurities have been mobilized and recrystallized by the intense pressure and heat of the metamorphism.
Examples of historically notable marble varieties and locations:
|Pentelic marble||pure-white, fine-grained semitranslucent||Mount Pentelicus ( ?), Attica ()||Greece|
|Creole marble||white and blue/black||Pickens County, Georgia||United States|
|Etowah marble||pink, salmon, rose||Pickens County, Georgia||United States|
|Makrana marble||white||Makrana, Nagaur district, Rajasthan||India|
|Murphy marble||white||Pickens and Gilmer Counties, Georgia||United States|
|Nero Marquina marble||black||Markina, Spain||Spain|
|Parian marble||pure-white, fine-grained||Island of Paros (), South Aegean ( ?)||Greece|
|Carrara marble||white or blue-gray||Carrara, Tuscany||Italy|
|Ruskeala marble||white||near Ruskeala (), Karelia (?)||Russia|
|Ru?chi?a marble||white, pinkish, reddish||Poiana Rusc? Mountains, Cara?-Severin County||Romania|
|Bianco Sivec||white||near Prilep (), Pelagonia ()||North Macedonia|
|Swedish green marble||green||near Kolmården, Södermanland||Sweden|
|Sylacauga marble||white||Talladega County, Alabama||United States|
|Vermont marble||white||Proctor, Vermont||United States|
|Yule marble||uniform pure white||near Marble, Colorado||United States|
|Wunsiedel marble||white||Wunsiedel, Bavaria||Germany|
White marble has been prized for its use in sculptures since classical times. This preference has to do with its softness, which made it easier to carve, relative isotropy and homogeneity, and a relative resistance to shattering. Also, the low index of refraction of calcite allows light to penetrate several millimeters into the stone before being scattered out, resulting in the characteristic waxy look which brings a lifelike luster to marble sculptures of any kind, which is why many sculptors preferred and still prefer marble for sculpting.
Construction marble is a stone which is composed of calcite, dolomite or serpentine which is capable of taking a polish. More generally in construction, specifically the dimension stone trade, the term "marble" is used for any crystalline calcitic rock (and some non-calcitic rocks) useful as building stone. For example, Tennessee marble is really a dense granular fossiliferous gray to pink to maroon Ordovician limestone, that geologists call the Holston Formation.
According to the United States Geological Survey, U.S. domestic marble production in 2006 was 46,400 tons valued at about $18.1 million, compared to 72,300 tons valued at $18.9 million in 2005. Crushed marble production (for aggregate and industrial uses) in 2006 was 11.8 million tons valued at $116 million, of which 6.5 million tons was finely ground calcium carbonate and the rest was construction aggregate. For comparison, 2005 crushed marble production was 7.76 million tons valued at $58.7 million, of which 4.8 million tons was finely ground calcium carbonate and the rest was construction aggregate. U.S. dimension marble demand is about 1.3 million tons. The DSAN World Demand for (finished) Marble Index has shown a growth of 12% annually for the 2000-2006 period, compared to 10.5% annually for the 2000-2005 period. The largest dimension marble application is tile.
In 1998, marble production was dominated by 4 countries that accounted for almost half of world production of marble and decorative stone. Italy and China were the world leaders, each representing 16% of world production, while Spain and India produced 9% and 8%, respectively. Italy is the world leader in marble export, with 20% share in global marble production, followed by China with 16%, India with 10%, Spain with 6%, and Portugal with 5%.
Dust produced by cutting marble could cause lung disease but more research needs to be carried out on whether dust filters and other safety products reduce this risk.
In the United States, the Occupational Safety and Health Administration (OSHA) has set the legal limit (permissible exposure limit) for marble exposure in the workplace as 15 mg/m3 total exposure and 5 mg/m3 respiratory exposure over an 8-hour workday. The National Institute for Occupational Safety and Health (NIOSH) has set a recommended exposure limit (REL) of 10 mg/m3 total exposure and 5 mg/m3 respiratory exposure over an 8-hour workday.
The haloalkaliphilic methylotrophic bacterium Methylophaga murata was isolated from deteriorating marble in the Kremlin. Bacterial and fungal degradation was detected in four samples of marble from Milan cathedral; black Cladosporium attacked dried acrylic resin using melanin.
As the favorite medium for Greek and Roman sculptors and architects (see classical sculpture), marble has become a cultural symbol of tradition and refined taste. Its extremely varied and colorful patterns make it a favorite decorative material, and it is often imitated in background patterns for computer displays, etc.
Places named after the stone include Marblehead, Massachusetts; Marblehead, Ohio; Marble Arch, London; the Sea of Marmara; India's Marble Rocks; and the towns of Marble, Minnesota; Marble, Colorado; Marble Falls, Texas, and Marble Hill, Manhattan, New York. The Elgin Marbles are marble sculptures from the Parthenon in Athens that are on display in the British Museum. They were brought to Britain by the Earl of Elgin.
This section does not cite any sources. (July 2017) (Learn how and when to remove this template message)
Marble dust is combined with cement or synthetic resins to make reconstituted or cultured marble. The appearance of marble can be simulated with faux marbling, a painting technique that imitates the stone's color patterns.
The Nike of Samothrace is made of Parian marble (c. 220-190 BC)
The Praetorians Relief, made from grey veined marble, c. 51-52 AD