Cage Aerial
Get Cage Aerial essential facts below. View Videos or join the Cage Aerial discussion. Add Cage Aerial to your topic list for future reference or share this resource on social media.
Cage Aerial

A cage antenna (British cage aerial) is a radio antenna that consists of the top portion of a tower or mast and of several parallel wires, which are radially arranged around the lower part of the mast. One advantage of the cage aerial is that the supporting tower can be grounded, allowing it to be used for other radio services, such as a support for VHF or UHF antennas. A grounded tower also simplifies the installation of aircraft warning lamps. Cage aerials have been built in different variants for broadcasting stations in the longwave and mediumwave bands.

The cage is electrically one-quarter of the operating wavelength. It is connected to the mast at its upper end. That way it isolates the lower part of the mast (?/4 stub) and makes the upper part of the mast the radiator. Very often the typical height of such an antenna is no problem as the height of the mast is selected for the TV or FM antennas on top.

Example: At 1000 kHz the wavelength is 300 m. Therefore, the minimum length of the cage antenna is a bit more than 150 m; 75 m for the radiator, 75 m for the cage and a few metres to make the lower end of the cage inaccessible from the ground, as the lower end of the cage carries a very high RF voltage. This type of antenna is known in America as a "folded unipole", which has been extensively studied by John H. Mullaney.

  This article uses material from the Wikipedia page available here. It is released under the Creative Commons Attribution-Share-Alike License 3.0.



Music Scenes