Get SPARC64 V essential facts below. View Videos or join the SPARC64 V discussion. Add SPARC64 V to your topic list for future reference or share this resource on social media.

General information
Designed byFujitsu
Max. CPU clock rate1.10 GHz to 1.35 GHz
Architecture and classification
Instruction setSPARC V9
Physical specifications
  • 1

The SPARC64 V (Zeus) is a SPARC V9 microprocessor designed by Fujitsu.[1] The SPARC64 V was the basis for a series of successive processors designed for servers, and later, supercomputers.

The servers series are the SPARC64 V+, VI, VI+, VII, VII+, X, X+ and XII. The SPARC64 VI and its successors up to the VII+ were used in the Fujitsu and Sun (later Oracle) SPARC Enterprise M-Series servers. In addition to servers, a version of the SPARC64 VII was also used in the commercially available Fujitsu FX1 supercomputer. As of October 2017, the SPARC64 XII is the latest server processor, and it is used in the Fujitsu and Oracle M12 servers.

The supercomputer series was based on the SPARC64 VII, and are the SPARC64 VIIfx, IXfx, and XIfx. The SPARC64 VIIIfx was used in the K computer, and the SPARC64 IXfx in the commercially available PRIMEHPC FX10. As of July 2016, the SPARC64 XIfx is the latest supercomputer processor, and it is used in the Fujitsu PRIMEHPC FX100 supercomputer.


In the late 1990s, HAL Computer Systems, a subsidiary of Fujitsu, was designing a successor to the SPARC64 GP as the SPARC64 V. First announced at Microprocessor Forum 1999, the HAL SPARC64 V would have operated 1 GHz and had a wide superscalar organization with superspeculation, an L1 instruction trace cache, a small but very fast 8 KB L1 data cache, and separate L2 caches for instructions and data. It was designed in Fujitsu's CS85 process, a 0.17 ?m CMOS process with six levels of copper interconnect; and would have consisted of 65 million transistors on a 380 mm2 die. Originally scheduled for a late 2001 release in Fujitsu GranPower servers, it was canceled in mid-2001 when HAL was closed by Fujitsu, and replaced by a Fujitsu design.[2]

The first Fujitsu SPARC64 Vs were fabricated in December 2001.[3] They operated at 1.1 to 1.35 GHz. Fujitsu's 2003 SPARC64 roadmap showed that the company planned a 1.62 GHz version for release in late 2003 or early 2004, but it was canceled in favor of the SPARC64 V+.[4] The SPARC64 V was used by Fujitsu in their PRIMEPOWER servers.

The SPARC64 V was first presented at Microprocessor Forum 2002.[5] At introduction, it had the highest clock frequency of both SPARC and 64-bit server processors in production; and the highest SPEC rating of any SPARC processor.[5]


The SPARC64 V is a four-issue superscalar microprocessor with out-of-order execution. It was based on the Fujitsu GS8900 mainframe microprocessor.[6]


The SPARC64 V fetches up to eight instructions from the instruction cache during the first stage and places them into a 48-entry instruction buffer. In the next stage, four instructions are taken from this buffer, decoded and issued to the appropriate reserve stations. The SPARC64 V has six reserve stations, two that serve the integer units, one for the address generators, two for the floating-point units, and one for branch instructions. Each integer, address generator and floating-point unit has an eight-entry reserve station. Each reserve station can dispatch an instruction to its execution unit. Which instruction is dispatched firstly depends on operand availability and then its age. Older instructions are given higher priority than newer ones. The reserve stations can dispatch instructions speculatively (speculative dispatch). That is, instructions can be dispatched to the execution units even when their operands are not yet available but will be when execution begins. During stage six, up to six instructions are dispatched.

Register read

The register files are read during stage seven. The SPARC architecture has separate register files for integer and floating-point instructions. The integer register file has eight register windows. The JWR (Joint Work Register) contains 64 entries and has eight read ports and two write ports. The JWR contains a subset of the eight register windows, the previous, current and next register windows. Its purpose is reduce the size of register file so that the microprocessor can operate at higher clock frequencies. The floating-point register file contains 64 entries and has six read ports and two write ports.


Execution begins during stage nine. There are six execution units, two for integer, two for loads and stores, and two for floating-point.[7] The two integer execution units are designated EXA and EXB. Both have an arithmetic logic unit (ALU) and a shift unit, but only EXA has multiply and divide units. Loads and stores are executed by two address generators (AGs) designated AGA and AGB. These are simple ALUs used to calculate virtual addresses.

The two floating-point units (FPUs) are designated FLA and FLB. Each FPU contains an adder and a multiplier, but only FLA has a graphics unit attached. They execute add, subtract, multiply, divide, square root and multiply-add instructions. Unlike its successor SPARC64 VI, the SPARC64 V performs the multiply-add with separate multiplication and addition operations, thus with up to two rounding errors.[8] The graphics unit executes Visual Instruction Set (VIS) instructions, a set of single instruction, multiple data (SIMD) instructions. All instructions are pipelined except for divide and square root, which are executed using iterative algorithms. The FMA instruction is implemented by reading three operands from the operand register, multiplying two of the operands, forwarding the result and the third operand to the adder, and adding them to produce the final result.

Results from the execution units and loads are not written to the register file. To maintain program order, they are written to update buffers, where they reside until committed. The SPARC64 V has separate update buffers for integer and floating-point units. Both have 32 entries each. The integer register has eight read ports and four write ports. Half of the write ports are used for results from the integer execution units and the other half by data returned by loads. The floating-point update buffer has six read ports and four write ports.

Commit takes place during stage ten at the earliest. The SPARC64 V can commit up to four instructions per cycle. During stage eleven, results are written to the register file, where it becomes visible to software.[9]


The SPARC64 V has two-level cache hierarchy. The first level consists of two caches, an instruction cache and a data cache. The second level consists of an on-die unified cache.

The level 1 (L1) caches each have a capacity of 128 KB. They are both two-way set associative and have 64-byte line size. They are virtually indexed and physically tagged. The instruction cache is accessed via a 256-bit bus. The data cache is accessed with two 128-bit buses. The data cache consists of eight banks separated by 32-bit boundaries. It uses a write-back policy. The data cache writes to the L2 cache with its own 128-bit unidirectional bus.

The second level cache has a capacity of 1 or 2 MB and the set associativity depends on the capacity.

System bus

The microprocessor has a 128-bit system bus that operates at 260 MHz. The bus can operate in two modes, single-data rate (SDR) or double-data (DDR) rate, yielding a peak bandwidth of 4.16 or 8.32 GB/s, respectively.


The SPARC64 V consisted of 191 million transistors, of which 19 million are contained in logic circuits.[10] It was fabricated in a 0.13 ?m,[11] eight-layer copper metallization, complementary metal–oxide–semiconductor (CMOS) silicon on insulator (SOI) process. The die measured 18.14 mm by 15.99 mm for a die area of 290 mm2.[10]


At 1.3 GHz, the SPARC64 V has a power dissipation of 34.7 W.[10] The Fujitsu PrimePower servers that use the SPARC64 V supply a slightly higher voltage the microprocessor to enable it to operate at 1.35 GHz. The increased power supply voltage and operating frequency increased the power dissipation to ~45 W.[12]


General information
Designed byFujitsu
Max. CPU clock rate1.65 GHz to 2.16 GHz
Architecture and classification
Instruction setSPARC V9
Physical specifications
  • 1

The SPARC64 V+, code-named "Olympus-B", is a further development of the SPARC64 V. Improvements over the SPARC64 V included higher clock frequencies of 1.82–2.16 GHz and a larger 3 or 4 MB L2 cache.[1]

The first SPARC64 V+, a 1.89 GHz version, was shipped in September 2004 in the Fujitsu PrimePower 650 and 850. In December 2004, a 1.82 GHz version was shipped in the PrimePower 2500. These versions have a 3 MB L2 cache.[13] In February 2006, four versions were introduced: 1.65 and 1.98 GHz versions with 3 MB L2 caches shipped in the PrimePower 250 and 450; and 2.08 and 2.16 GHz versions with 4 MB L2 caches shipped in mid-range and high-end models.[14]

It contained approximately 400 million transistors on an 18.46 mm by 15.94 mm die for an area of 294.25 mm2. It was fabricated in a 90 nm CMOS process with ten levels of copper interconnect.[6]


General information
Max. CPU clock rate2150 - 2400
L1 cache128 KB per core
L2 cache4–6 MB per core
Architecture and classification
InstructionsSPARC V9
Physical specifications
  • 2
PredecessorSPARC64 V+
SuccessorSPARC64 VII

The SPARC64 VI, code-named Olympus-C, is a two-core processor (the first multi-core SPARC64 processor) which succeeded the SPARC64 V+. It is fabricated by Fujitsu in a 90 nm, 10-layer copper, CMOS silicon on insulator (SOI) process, which enabled two cores and an L2 cache to be integrated on a die. Each core is a modified SPARC64 V+ processor. One of the main improvements is the addition of two-way coarse-grained multi-threading (CMT), which Fujitsu called vertical multi-threading (VMT). In CMT, which thread is executed is determined by time-sharing, or if the thread is executing a long-latency operation, then execution is switched to the other thread.[15] The addition of CMT required duplication of the program counter and the control, integer, and floating-point registers so there is one set of each for every thread. A floating-point fused multiply-add (FMA) instruction was also added, the first SPARC processor to do so.[8]

The cores share a 6 MB on-die unified L2 cache. The L2 cache is 12-way set associative and has 256-byte lines. The cache is accessed via two unidirectional buses, a 256-bit read bus and a 128-bit write bus. The SPARC64 VI has a new system bus, the Jupiter Bus. The SPARC64 VI consisted of 540 million transistors. The die measures 20.38 mm by 20.67 mm (421.25 mm2).

The SPARC64 VI was originally to have been introduced in mid-2004 in Fujitsu's PrimePower servers. Development of the PrimerPowers were canceled after Fujitsu and Sun Microsystems announced in June 2004 that they would collaborate on new servers called the Advanced Product Line (APL). These servers were scheduled to be introduced in mid-2006, but were delayed until April 2007, when they were introduced as the SPARC Enterprise. The SPARC64 VI processors featured in the SPARC Enterprise at its announcement were a 2.15 GHz version with a 5 MB L2 cache, and 2.28 and 2.4 GHz versions with 6 MB L2 caches.[16]


The SPARC64 VII (previously called the SPARC64 VI+),[17] code-named Jupiter,[18] is a further development of the SPARC64 VI announced in July 2008.[18] It is a quad-core microprocessor. Each core is capable of two-way simultaneous multithreading (SMT), which replaces two-way coarse-grained multithreading, termed vertical multithreading (VMT) by Fujitsu. Thus, it can execute eight threads simultaneously.[19] Other changes include more RAS features; the integer register file is now protected by ECC, and the number of error checkers has been increased to around 3,400. It consists of 600 million transistors, is 21.31 mm × 20.86 mm (444.63 mm2) large, and is fabricated by Fujitsu in its 65 nm CMOS, copper interconnect process.

The SPARC64 VII was featured in the SPARC Enterprise. It is socket-compatible with its predecessor, the SPARC64 VI, and is field-upgradeable. SPARC64 VIIs could coexist, whilst operating at their native clock frequency, alongside SPARC64 VIs.[20] The first versions of the SPARC64 VII were a 2.4 GHz version with a 5 MB L2 cache used in the SPARC Enterprise M4000 and M5000, and a 2.52 GHz version with a 6 MB L2 cache.[18] On 28 October 2008, a 2.52 GHz version with a 5 MB L2 cache was introduced in the SPARC Enterprise M3000.[21] On 13 October 2009, Fujitsu and Sun introduced new versions of the SPARC64 VII (code-named Jupiter+),[22] a 2.53 GHz version with a 5.5 MB L2 cache for the M4000 and M5000, and a 2.88 GHz version with a 6 MB L2 cache for the M8000 and M9000.[23] On 12 January 2010, a 2.75 GHz version with a 5 MB L2 cache was introduced in the M3000.[24]


The SPARC64 VII+ (Jupiter-E),[25] referred to as the M3 by Oracle,[25] is a further development of the SPARC64 VII. The clock frequency was increased up to 3 GHz and the L2 cache size was doubled to 12 MB. This version was announced on 2 December 2010 for the high-end SPARC Enterprise M8000 and M9000 servers.[26] These improvements resulted in an approximately 20% increase to overall performance. A 2.66 GHz version was for mid-range M4000 and M5000 models.[25] On 12 April 2011, a 2.86 GHz version with two or four cores and a 5.5 MB L2 cache was announced for the low-end M3000.[27][25] The VII+ is socket-compatible with its predecessor, the VII. Existing high-end SPARC Enterprise M-Series servers are able to upgrade to the VII+ processors in the field.[28]


A K computer blade featuring four SPARC64 VIIIfx processors (under the larger heat exchangers)
SPARC64 VIIIfx 2.00GHz.jpg

The SPARC64 VIIIfx (Venus) is an eight-core processor based on the SPARC64 VII designed for high-performance computing (HPC).[29] As a result, the VIIIfx did not succeed the VII, but existed concurrently with it. It consists of 760 million transistors, measures 22.7 mm by 22.6  (513.02 mm2;), is fabricated in Fujitu's 45 nm CMOS process with copper interconnects, and has 1,271 I/O pins. The VIIIfx has a peak performance is 128 GFLOPS and a typical power consumption of 58 W at 30 °C for an efficiency of 2.2 GFLOPS/W. The VIIIfx has four integrated memory controllers for a total of eight memory channels. It connects to 64 GB of DDR3 SDRAM and has a peak memory bandwidth of 64 GB/s.[30]


The VIIIfx was developed for the Next-Generation Supercomputer Project (also called Kei Soku Keisenki and Project Keisoku) initiated by Japan's Ministry of Education, Culture, Sports, Science and Technology in January 2006. The project aimed to produce the world's fastest supercomputer with performance of over 10 PFLOPS by March 2011. The companies contracted to develop the supercomputer were Fujitsu, Hitachi, and NEC. The supercomputer was originally envisioned to have a hybrid architecture containing scalar and vector processors. The Fujitsu-designed VIIIfx was to have been the scalar processor, with the vector processor to have been jointly designed by Hitachi and NEC. However, due to the Financial crisis of 2007–2008, Hitachi and NEC announced in May 2009 that they would leave the project because manufacturing the hardware they were responsible for would result in financial losses for them. Afterwards, Fujitsu redesigned the supercomputer to use the VIIIfx as its only processor type.

By 2010, the supercomputer that would be built by the project was named the K computer. Located at the RIKEN's Advanced Institute for Computational Science (AICS) in Kobe, Japan;[31][32][33] it obtains its performance from 88,128 VIIIfx processors. In June 2011, the TOP500 Project Committee announced that the K computer (still incomplete with only 68,544 processors) topped the LINPACK benchmark at 8.162 PFLOPS, realizing 93% of its peak performance, making it the fastest supercomputer in the world at that time.[32][34][35][36]


The VIIIfx core is based on that of the SPARC64 VII with numerous modifications for HPC, namely High Performance Computing-Arithmetic Computational Extensions (HPC-ACE) a Fujitsu-designed extension to the SPARC V9 architecture. The front-end had coarse-grained multi-threading removed, the L1 instruction cache halved in size to 32 KB; and the number of branch target address cache (BTAC) entries reduced to 1,024 from 8,192, and its associativity reduced to two from eight; and an extra pipeline stage was inserted before the instruction decoder. This stage accommodated the greater number of integer and floating-point registers defined by HPC-ACE. The SPARC V9 architecture was designed to have only 32 integer and 32 floating-point number registers. The SPARC V9 instruction encoding limited the number of registers specifiable to 32. To specify the extra registers, HPC-ACE has a "prefix" instruction that would immediately follow one or two SPARC V9 instructions. The prefix instruction contained (primarily) the portions of the register numbers that could not fit within a SPARC V9 instruction. This extra pipeline stage was where up to four SPARC V9 instructions were combined with up to two prefix instructions in the preceding stage. The combined instructions were then decoded in the next pipeline stage.

The back-end was also heavily modified. The number of reservation station entries for branch and integer instructions were reduced to six and ten, respectively. Both the integer and floating-point register files had registers added to them: the integer register file gained 32, and there were a total of 256 floating-point registers. The extra integer registers are not part of the register windows defined by SPARC V9, but are always accessible via the prefix instruction; and the 256 floating-point registers could be used by both scalar floating-point instructions and by both integer and floating-point SIMD instructions. An extra pipeline stage was added to the beginning of the floating-point execution pipeline to access the larger floating-point register file. The 128-bit SIMD instructions from HPC-ACE were implemented by adding two extra floating-point units for a total of four. SIMD execution can perform up four single- or double-precision fused-multiply-add operations (eight FLOPs) per cycle. The number of load queue entries was increased to 20 from 16, and the L1 data cache was halved in size to 32 KB. The number of commit stack entries, which determined the number of instructions that could be in-flight in the back-end, was reduced to 48 from 64.

Miscellaneous specifications

  • Physical address range: 41 bits
  • Cache:
  • L1: 32 KB two-way set-associative data, 32 KB two-way set-associative instruction (128-byte cache line), sectored
  • L2: 6 MB 12-way set-associative (128-byte line), index-hashed, sectored
  • A 16-entry micro-TLB; and 256-entry, four-way set-associative TLB for instructions
  • A 512-entry, four-way set-associative TLB for data, no victim cache
  • Page sizes: 8 KB, 64 KB, 512 KB, 4 MB, 32 MB, 256 MB, 2 GB


The SPARC64 IXfx is an improved version of the SPARC64 VIIIfx designed by Fujitsu and LSI[37] first revealed in the announcement of the PRIMEHPC FX10 supercomputer on 7 November 2011.[38] It, along with the PRIMEHPC FX10, is a commercialization of the technologies that first appeared in the VIIIfx and K computer. Compared to the VIIIfx, organizational improvements included doubling the number of cores was to 16, doubling the amount of shared L2 cache to 12 MB, and increasing peak DDR3 SDRAM memory bandwidth to 85 GB/s. The IXfx operates at 1.848 GHz, has a peak performance of 236.5 GFLOPS, and consumes 110 W for a power efficiency of more than 2 GFLOPS per watt.[39][37] It consisted of 1 billion transistors and was implemented in a 40 nm CMOS process with copper interconnects.[40]


The SPARC64 X is a 16-core server microprocessor announced in 2012 and used in Fujitsu's M10 servers (which are also marketed by Oracle). The SPARC64 X is based on the SPARC64 VII+ with significant enhancements to its core and chip organization. The cores were improved by the inclusion of a pattern history table for branch prediction, speculative execution of loads, more execution units, support for the HPC-ACE extension (originally from the SPARC64 VIIIfx), deeper pipeline for a 3.0 GHz clock frequency, and accelerators for cryptography, database, and decimal floating-point number arithmetic and conversion functions. The 16 cores share a unified, 24 MB, 24-way set-associative L2 cache. Chip organization improvements include four integrated DDR3 SDRAM memory controllers, glueless four-way symmetrical multiprocessing, ten SERDES channels for symmetrical multiprocessing scalability to 64 sockets, and two integrated PCI Express 3.0 controllers. The SPARC64 X contains 2.95 billion transistors, measures 23.5 mm by 25 mm (637.5 mm2), and is fabricated in a 28 nm CMOS process with copper interconnects.[41][40]


The SPARC64 X+ is an enhanced SPARC64 X processor announced in 2013. It features minor improvements to the core organization, and a higher 3.5 GHz clock frequency obtained through better circuit design and layout. It contained 2.99 billion transistors, measured 24 mm by 25 mm (600 mm2), and is fabricated in the same process as the SPARC64 X.[42][43] On 8 April 2014, 3.7 GHz speed-binned parts became available in response to the introduction of new Xeon E5 and E7 models by Intel; and the impending introduction of the POWER8 by IBM.[44]


Fujitsu introduced the SPARC64 XIfx in August 2014 at the Hot Chips symposium.[45] It is used in the Fujitsu PRIMEHPC FX100 supercomputer, which succeeded the PRIMEHPC FX10.[46][47] The XIfx operates at 2.2 GHz and has a peak performance of 1.1 TFLOPS.[48] It consists of 3.75 billion transistors and is fabricated by the Taiwan Semiconductor Manufacturing Company in its 20 nm high-? metal gate (HKMG) process. The Microprocessor Report estimated the die to have an area of 500 mm2; and a typical power consumption of 200 W.[45]

The XIfx has 34 cores, 32 of which are compute cores used to run user applications, and 2 assistant cores used to run the operating system and other system services. The delegation of user applications and operating system to dedicated cores improves performance by ensuring that the private caches of the compute cores are not shared with or disrupted by non-application instructions and data. The 34 cores are further organized into two Core Memory Groups (CMGs), each consisting of 16 compute cores and 1 assistant core sharing a 12 MB L2 unified cache. The division of the cores into CMGs enabled 34 cores to be integrated on a single die by easing the implementation of cache coherence and avoiding the need for the L2 cache to be shared between 34 cores. The two CMGs share the memory through a ccNUMA organization.

The XIfx core was based on the SPARC64 X+ with organizational improvements. The XIfx implements an improved version of the HPC-ACE extensions (HPC-ACE2), which doubled the width of the SIMD units to 256 bits and added new SIMD instructions. Compared to the SPARC64 IXfx, the XIfx has an improvement of a factor of 3.2 for double precision and 6.1 for single precision. To complement the increased width of the SIMD units, the L1 cache bandwidth was increased to 4.4 TB/s.

Improvements to the SoC organization were to the memory and interconnect interfaces. The integrated memory controllers were replaced with four Hybrid Memory Cube (HMC) interfaces for decreased memory latency and improved memory bandwidth. According to the Microprocessor Report, the IXfx was the first processor to use HMCs.[45] The XIfx is connected to 32 GB of memory provided by eight 4 GB HMCs. The HMCs are 16-lane versions, with each lane operating at 15 Gbit/s. Each CMG has two HMC interfaces, and each HMC interface is connected to two HMCs via its own ports. Each CMG has 240 GB/s (120 GB/s in and 120 GB/s out) of memory bandwidth.

The XIfx replaced the ten SERDES channels to an external Tofu interconnect controller with a ten-port integrated controller for the second-generation Tofu2 interconnect. Tofu2 is a 6D mesh/torus network with a 25 GB/s full-duplex bandwidth (12.5 GB/s per direction, 125 GB/s for ten ports) and an improved routing architecture.


Fujitsu announced at the International Supercomputing Conference in June 2016 that its future exascale supercomputer will feature processors of its own design that implement the ARMv8 architecture. The A64FX will implement extensions to the ARMv8 architecture, equivalent to HPC-ACE2, that Fujitsu is developing with ARM Holdings.[49]


Sparc64-XII cores run at 3.9 GHz on the 20nm process by TSMC. 5.5 billion transistors and 153 GB/sec memory bandwidth and the only UNIX vendor able to run Solaris 10 on bare metal. The CPU package features up to 12 cores × 8-way SMT (96 threads).


  1. ^ a b "Fujitsu Draws Sparc64 Roadmap Past 2010"
  2. ^ Diefendorff 1999
  3. ^ "Microarchitecture and Performance Analysis of a SPARC-V9 Microprocessor for Enterprise Server Systems".
  4. ^ "Fujitsu-Siemens upgrades PrimePower Unix servers"
  5. ^ a b "Fujitsu's SPARC64 V Is Real Deal" p. 1.
  6. ^ a b "SPARC64 V Processor For UNIX Server"
  7. ^ "Fujitsu's SPARC V Is Real Deal", p. 2.
  8. ^ a b "SPARC64 VI Extensions" page 56, Fujitsu Limited, Release 1.3, 27 March 2007
  9. ^ "Microarchitecture and Performance Analysis of a SPARC-V9 Microprocessor for Enterprise Server Systems", p. 4.
  10. ^ a b c "A 1.3GHz Fifth Generation SPARC64 Microprocessor", p. 702.
  11. ^ "Fujitsu's SPARC64 V IS Real Deal", p. 3
  12. ^ "A 1.3GHz Fifth Generation SPARC64 Microprocessor", p. 705.
  13. ^ Morgan 2004
  14. ^ "Fujitsu-Siemens Cranks the Clock on Sparc V Chips for PrimePowers"
  15. ^ Fujitsu Limited (27 March 2007). "SPARC64 VI Extensions, Release 1.3". pp. 45–46.
  16. ^ Morgan 2007
  17. ^ "SPARC's Still Going Strong", p. 1.
  18. ^ a b c Morgan 2008
  19. ^ "Hot Chips: Fujitsu shows off SPARC64 VII"
  20. ^ "Sun SPARC Enterprise Server Family Architecture: Flexible, Mainframe-Class Compute Power for the Datacenter" (PDF). Sun Microsystems. Retrieved 2008.
  21. ^ Morgan 28 October 2008
  22. ^ Morgan, 11 September 2009.
  23. ^ Morgan, 13 October 2009
  24. ^ Morgan, 12 January 2010
  25. ^ a b c d Morgan 2011
  26. ^ Fujitsu 2010
  27. ^ Fujitsu 2011
  28. ^ "Ellison: Sparc T4 due next year: Sparc64-VII+ clock and cache bumps now". The Register. Retrieved 2010.
  29. ^ "Fujitsu unveils world's fastest CPU". The Inquirer. 14 May 2009. Retrieved 2009.
  30. ^ Takumi Maruyama (2009). SPARC64 VIIIfx: Fujitsu's New Generation Octo Core Processor for PETA Scale computing (PDF). Proceedings of Hot Chips 21. IEEE Computer Society. Archived from the original (PDF) on 8 October 2010. Retrieved 2019.
  31. ^ "Japanese supercomputer 'K' is world's fastest". The Telegraph. 20 June 2011. Retrieved 2011.
  32. ^ a b "Japanese 'K' Computer Is Ranked Most Powerful". The New York Times. 20 June 2011. Retrieved 2011.
  33. ^ "Supercomputer "K computer" Takes First Place in World". Fujitsu. Retrieved 2011.
  34. ^ "Supercomputer "K computer" Takes First Place in World". RIKEN. Retrieved 2011.
  35. ^ "Japan Reclaims Top Ranking on Latest TOP500 List of World's Supercomputers",, archived from the original on 23 June 2011, retrieved 2011
  36. ^ "K computer, SPARC64 VIIIfx 2.0 GHz, Tofu interconnect",, retrieved 2011
  37. ^ a b Byrne 2011
  38. ^ Fujitsu Launches PRIMEHPC FX10 Supercomputer
  39. ^ Morgan, Timothy Prickett (7 November 2011). "Fujitsu readies 23 petaflops Sparc FX10 super beast". The Register.
  40. ^ a b Maruyama, Takumi (29 August 2012). "SPARC64 X: Fujitsu's New Generation 16 Core Processor for the next generation UNIX servers". IEEE Hot Chips 24 Symposium (HCS). doi:10.1109/HOTCHIPS.2012.7476503. S2CID 34868980. Cite journal requires |journal= (help)
  41. ^ Halfhill, Tom R. (17 September 2012). "Fujitsu and Oracle Ignite SPARCs". Microprocessor Report.
  42. ^ Gwennap, Linley (7 October 2013). "Fujitsu, Oracle Processors Evolve". Microprocessor Report.
  43. ^ Yoshida, Toshio (27 August 2013). "SPARC64 X+: Fujitsu's Next Generation Processor for UNIX servers". Missing or empty |url= (help)
  44. ^ Prickett, Timothy Morgan (8 April 2014). "Oracle Unfolds Sparc Roadmap, Fujitsu boosts SPARC64 X Clocks". EnterpriseTech. Missing or empty |url= (help)
  45. ^ a b c Halfhill 2014
  46. ^ Sparc-Prozessor für 100-Petaflop-Rechner Heise Newsticker, 6 August 2014
  47. ^ Next Generation PRIMEHPC Fujitsu Ltd., 2014
  48. ^ Fujitsu guns for faster supercomputers with new chip Agam Shah, PC World, 6 August 2014
  49. ^ Morgan, Timothy Prickett (23 June 2016). "Inside Japan's Future Exascale ARM Supercomputer". The Next Platform. Retrieved 2016.


Further reading

  • Ando, H.; Yoshida, Y.; Inoue, A.; Sugiyama, I.; Asakawa, T.; Morita, K.; Muta, T.; Motokurumada, T.; Okada, S.; Yamashita, H.; Satsukawa, Y.; Konmoto, A.; Yamashita, R.; Sugiyama, H. (13 February 2003). A 1.3 GHz fifth generation SPARC64 microprocessor. 2003 IEEE International Solid-State Circuits Conference. Solid-State Circuits Conference, 1997. Digest of Technical Papers. 43Rd Isscc., 1997 IEEE International. pp. 246, 491. doi:10.1109/ISSCC.2003.1234286. ISBN 0-7803-7707-9. ISSN 0193-6530.
  • Ando, H.; Yoshida, Y.; Inoue, A.; Sugiyama, I.; Asakawa, T.; Morita, K.; Muta, T.; Motokurumada, T.; Okada, S.; Yamashita, H.; Satsukawa, Y.; Konmoto, A.; Yamashita, R.; Sugiyama, H. (2003). A 1.3GHz fifth generation SPARC64 microprocessor. Design Automation Conference. pp. 702-705. doi:10.1145/775832.776010. ISBN 1-58113-688-9.
  • Ito, N.; Komatsu, H.; Tanamura, Y.; Yamashita, R.; Sugiyama, H.; Sugiyama, Y.; Hamamura, H. (2003). A physical design methodology for 1.3 GHz SPARC 64 microprocessor. 21st International Conference on Computer Design. Computer Design: Vlsi in Computers and Processors, (Iccd), IEEE International Conference on. pp. 204-210. doi:10.1109/ICCD.2003.1240896. ISBN 0-7695-2025-1. ISSN 1063-6404.
  • Ando, Hisashige; Kan, Ryuji; Tosaka, Yoshiharu; Takahisa, Keiji; Hatanaka, Kichiji (24-27 June 2008). Validation of hardware error recovery mechanisms for the SPARC64 V microprocessor. 2008 IEEE International Conference on Dependable Systems and Networks. International Conference on Dependable Systems & Networks. pp. 62-69. doi:10.1109/DSN.2008.4630071. ISBN 978-1-4244-2397-2. ISSN 1530-0889.
  • Maruyama, Takumi; Yoshida, Toshio; Kan, Ryuji; Yamazaki, Iwao; Yamamura, Shuji; Takahashi, Noriyuki; Hondou, Mikio; Okano, Hiroshi (March-April 2010). "Sparc64 VIIIfx: A New-Generation Octocore Processor for Petascale Computing". IEEE Micro. 30 (2): 30-40. doi:10.1109/MM.2010.40. ISSN 0272-1732. S2CID 206472881.
  • Okano, Hiroshi; Kawabe, Yukihito; Kan, Ryuji; Yoshida, Toshio; Yamazaki, Iwao; Sakurai, Hitoshi; Hondou, Mikio; Matsui, Nobuyki; Yamashita, Hideo; Nakada, Tatsumi; Maruyama, Takumi; Asakawa, Takeo (2010). Fine grained power analysis and low-power techniques of a 128GFLOPS/58W SPARC64 VIIIfx processor for peta-scale computing. Symposium on VLSI Circuits. Digest of Technical Papers. pp. 167-168. doi:10.1109/VLSIC.2010.5560313. ISBN 978-1-4244-5454-9. ISSN 2158-5601.
  • Kan, Ryuji; Tanaka, Tomohiro; Sugizaki, Go; Nishiyama, Ryuichi; Sakabayashi, Sota; Koyanagi, Yoichi; Iwatsuki, Ryuji; Hayasaka, Kazumi; Uemura, Taiki; Ito, Gaku; Ozeki, Yoshitomo; Adachi, Hiroyuki; Furuya, Kazuhiro; Motokurumada, Tsuyoshi (2013). A 10th generation 16-core SPARC64 processor for mission-critical UNIX server. IEEE International Solid-State Circuits Conference. Solid-State Circuits Conference, 1997. Digest of Technical Papers. 43Rd Isscc., 1997 IEEE International. pp. 60-61. doi:10.1109/ISSCC.2013.6487637. ISBN 978-1-4673-4515-6. ISSN 0193-6530.
  • Kan, Ryuji; Tanaka, Tomohiro; Sugizaki, Go; Ishizaka, Kinya; Nishiyama, Ryuichi; Sakabayashi, Sota; Koyanagi, Yoichi (January 2014). "The 10th Generation 16-Core SPARC64 Processor for Mission Critical UNIX Server". IEEE Journal of Solid-State Circuits. 49 (1): 32-40. doi:10.1109/JSSC.2013.2284650. ISSN 0018-9200. S2CID 32362191.
  • Yoshida, Toshio; Maruyama, Takumi; Akizuki, Yasunobu; Kan, Ryuji; Kiyota, Naohiro; Ikenishi, Kiyoshi; Itou, Shigeki; Watahiki, Tomoyuki; Okano, Hiroshi (November-December 2013). "Sparc64 X: Fujitsu's New-Generation 16-Core Processor for Unix Servers". IEEE Micro. 33 (6): 16-24. doi:10.1109/MM.2013.126. ISSN 0272-1732. S2CID 8056145.
  • Yoshida, Toshio; Hondou, Mikio; Tabata, Takekazu; Kan, Ryuji; Kiyota, Naohiro; Kojima, Hiroyuki; Hosoe, Koji; Okano, Hiroshi (March-April 2015). "Sparc64 XIfx: Fujitsu's Next-Generation Processor for High-Performance Computing". IEEE Micro. 35 (2): 32-40. doi:10.1109/MM.2015.11. ISSN 0272-1732. S2CID 206473367.

External links

  This article uses material from the Wikipedia page available here. It is released under the Creative Commons Attribution-Share-Alike License 3.0.



Music Scenes